? semiconductor components industries, llc, 2014 august, 2014 ? rev. 4 1 publication order number: ntgs4111p/d ntgs4111p, nvgs4111p power mosfet ? 30 v, ? 4.7 a, single p ? channel, tsop ? 6 features ? leading ? 30 v trench process for low r ds(on) ? low profile package suitable for portable applications ? surface mount tsop ? 6 package saves board space ? improved efficiency for battery applications ? nv prefix for automotive and other applications requiring unique site and control change requirements; aec ? q101 qualified and ppap capable ? pb ? free package is available applications ? battery management and switching ? load switching ? battery protection maximum ratings (t j = 25 c unless otherwise noted) rating symbol value unit drain ? to ? source voltage v dss ? 30 v gate ? to ? source voltage v gs 20 v continuous drain cur- rent (note 1) steady state t a = 25 c i d ? 3.7 a t a = 85 c ? 2.7 t 5 s t a = 25 c ? 4.7 power dissipation (note 1) steady state t a = 25 c p d 1.25 w t 5 s 2.0 continuous drain cur- rent (note 2) steady state t a = 25 c i d ? 2.6 a t a = 85 c ? 1.9 power dissipation (note 2) t a = 25 c p d 0.63 w pulsed drain current tp = 10 s i dm ? 15 a operating junction and storage temperature t j , t stg ? 55 to 150 c source current (body diode) i s ? 1.7 a lead temperature for soldering purposes (1/8 from case for 10 s) t l 260 c thermal resistance ratings rating symbol max unit junction ? to ? ambient ? steady state (note 1) r ja 100 c/w junction ? to ? ambient ? t 5 s (note 1) r ja 62.5 junction ? to ? ambient ? steady state (note 2) r ja 200 stresses exceeding those listed in the maximum ratings table may damage the device. if any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. 1. surface ? mounted on fr4 board using 1 in sq pad size (cu area = 1.127 in sq [1 oz] including traces). 2. surface ? mounted on fr4 board using the minimum recommended pad size (cu area = 0.006 in sq). 3 4 1256 p ? channel http://onsemi.com tsop ? 6 case 318g style 1 marking diagram & pin assignment 1 xx m xx = specific device code m = date code* = pb ? free package source 4 drain 6 drain 5 3 gate 1 drain 2 drain (note: microdot may be in either location) *date code orientation may vary depending upon manufacturing location. ? 30 v 68 m @ ? 4.5 v 38 m @ ? 10 v r ds(on) typ ? 4.7 a i d max v (br)dss see detailed ordering and shipping information ion page 5 of this data sheet. ordering information
ntgs4111p, nvgs4111p http://onsemi.com 2 electrical characteristics (t j = 25 c unless otherwise noted) characteristic symbol test condition min typ max unit off characteristics drain ? to ? source breakdown voltage v (br)dss v gs = 0 v, i d = ? 250 a ? 30 v drain ? to ? source breakdown voltage temperature coefficient v (br)dss /t j ? 17 mv/ c zero gate voltage drain current i dss v gs = 0 v, v ds = ? 24 v t j = 25 c ? 1.0 a t j = 125 c ? 100 gate ? to ? source leakage current i gss v ds = 0 v, v gs = 20 v 100 na on characteristics (note 3) gate threshold voltage v gs(th) v gs = v ds , i d = ? 250 a ? 1.0 ? 3.0 v negative threshold temperature coefficient v gs(th) /t j 5.0 mv/ c drain ? to ? source on resistance r ds(on) v gs = ? 10 v, i d = ? 3.7 a 38 60 m v gs = ? 4.5 v, i d = ? 2.7 a 68 110 forward transconductance g fs v ds = ? 10 v, i d = ? 3.7 a 6.0 s charges, capacitances and gate resistance input capacitance c iss v gs = 0 v, f = 1.0 mhz, v ds = ? 15 v 750 pf output capacitance c oss 140 reverse transfer capacitance c rss 105 total gate charge q g(tot) v gs = ? 10 v, v dd = ? 15 v, i d = ? 3.7 a 15.25 32 nc threshold gate charge q g(th) 0.8 gate ? to ? source charge q gs 2.6 gate ? to ? drain charge q gd 3.4 switching characteristics, vgs = ? 10 v (note 4) turn ? on delay time t d(on) v gs = ? 10 v, v dd = ? 15 v, i d = ? 1.0 a, r g = 6.0 9.0 17 ns rise time t r 9.0 18 turn ? off delay time t d(off) 38 85 fall time t f 22 45 switching characteristics, vgs = ? 4.5 v (note 4) turn ? on delay time t d(on) v gs = ? 4.5 v, v dd = ? 15 v, i d = ? 1.0 a, r g = 6.0 11 20 ns rise time t r 15 28 turn ? off delay time t d(off) 28 56 fall time t f 22 50 drain ? source diode characteristics characteristic symbol test condition min typ max unit forward diode voltage v ds v gs = 0 v, i s = ? 1.0 a t j = 25 c ? 0.76 ? 1.2 v t j = 125 c ? 0.60 reverse recovery time t rr v gs = 0 v di s /dt = 100 a/ s, i s = ? 1.0 a 17 40 ns charge time t a 9.0 discharge time t b 8.0 reverse recovery charge q rr 8.0 nc product parametric performance is indicated in the electrical characteristics for the listed test conditions, unless otherwise noted. product performance may not be indicated by the electrical characteristics if operated under different conditions. 3. pulse test: pulse width 300 s, duty cycle 2%. 4. switching characteristics are independent of operating junction temperatures.
ntgs4111p, nvgs4111p http://onsemi.com 3 typical performance curves (t j = 25 c unless otherwise noted) ? 8 v 100 c 0 12 9 1.2 0.8 ? v ds , drain ? to ? source voltage (volts) ? i d, drain current (amps) 3 0 0.4 figure 1. on ? region characteristics 1 10 2.5 23 8 7 1 1.5 0 4.5 figure 2. transfer characteristics ? v gs , gate ? to ? source voltage (volts) 15 1000 100 figure 3. on ? resistance vs. gate ? to ? source voltage ? v ds , drain ? to ? source voltage (volts) ? i dss, leakage current (na) ? i d, drain current (amps) 210 0.1 figure 4. on ? resistance vs. drain current and gate voltage ? v gs, gate voltage (volts) ? 50 0 ? 25 25 1.0 0.5 50 125 100 figure 5. on ? resistance variation with temperature t j , junction temperature ( c) t j = 25 c 100000 5 t j = ? 55 c v gs = 0 v 75 150 i d = ? 3.7 a v gs = ? 10 v r ds(on), drain ? to ? source resistance (normalized) 25 c r ds(on), drain ? to ? source resistance ( ) 1.5 ? 3 v 25 30 ? 3.2 v ? 3.4 v ? 4.5 v 0.2 1.6 2 10000 468 0 figure 6. drain ? to ? source leakage current vs. voltage 2.0 0.05 ? i d, drain current (amps) 0.1 0 r ds(on), drain ? to ? source resistance ( ) v gs = ? 4.5 v 4.0 6 9 10 3.0 t j = 25 c v gs = ? 10 v t j = 100 c t j = 150 c 3.5 4 2 3 4 5 6 v ds ? 10 v 9 357 t j = 25 c i d = ? 3.7 a 20 11 8 2 5 10 7 1 4 3.2 2.8 2.4 3.6 4 ? 3.6 v ? 3.8 v ? 4 v ? 4.2 v ? 10v ? 6 v ? 5 v ? 5.5 v 5 11 12
ntgs4111p, nvgs4111p http://onsemi.com 4 typical performance curves (t j = 25 c unless otherwise noted) v ds = 0 v v gs = 0 v 0 10 10 1400 600 400 200 0 30 ? gate ? to ? source or drain ? to ? source voltage (volts) c, capacitance (pf) 0 8 2 0 q g , total gate charge (nc) ? v gs, gate ? to ? source voltage (volts) t j = 25 c c oss c iss c rss i d = ? 3.7 a t j = 25 c 1000 12 8 4 6 q gs 5 800 12 ? v gs ? v ds 15 4 0.9 1 ? v sd , source ? to ? drain voltage (volts) ? i s , source current (amps) t j = 25 c 1.0 0.4 0.3 10 figure 7. capacitance variation figure 8. gate ? to ? source voltage vs. total gate charge figure 9. maximum rated forward biased safe operating area figure 10. diode forward voltage vs. current 5 1200 216 qt 0.5 0.8 0.6 0.1 0.7 0.1 1 100 ? v ds , drain ? to ? source voltage (volts) 0.01 100 ? i d , drain current (amps) r ds(on) limit thermal limit package limit 10 10 v gs = ? 20 v single pulse t c = 25 c 1 ms 100 s dc 0.1 1 10 ms 1300 500 300 100 900 700 1100 20 25 c iss c rss 10 0 20 10 ? v ds, drain ? to ? source voltage (volts) 61014 113 9 5 371115 q gd v gs v ds 1.1 v gs = 0 v t j = ? 55 c t j = 150 c t j = 100 c 0.0001 1 1e ? 03 1e ? 02 1e ? 01 1e+00 1e+01 1e+02 1e+03 0.1 d = 0.5 r thja(t) , effective transient thermal response figure 11. fet thermal response 0.2 0.1 0.05 0.02 0.01 single pulse t, time (s) 0.01 0.001 1e ? 06 1e ? 05 1e ? 04 1e ? 07
ntgs4111p, nvgs4111p http://onsemi.com 5 table 1. ordering information part number marking (xx) package shipping ? ntgs4111pt1 tg sc ? 88 3000 / tape & reel ntgs4111pt1g tg sc ? 88 (pb ? free) 3000 / tape & reel NVGS4111PT1G vtg sc ? 88 (pb ? free) 3000 / tape & reel ?for information on tape and reel specifications, including part orientation and tape sizes, please refer to our tape and reel packaging specifications brochure, brd8011/d.
ntgs4111p, nvgs4111p http://onsemi.com 6 package dimensions ? 6 case 318g ? 02 issue v 23 4 5 6 d 1 e b e1 a1 a 0.05 notes: 1. dimensioning and tolerancing per asme y14.5m, 1994. 2. controlling dimension: millimeters. 3. maximum lead thickness includes lead finish. minimum lead thickness is the minimum thickness of base material. 4. dimensions d and e1 do not include mold flash, protrusions, or gate burrs. mold flash, protrusions, or gate burrs shall not exceed 0.15 per side. dimensions d and e1 are determined at datum h. 5. pin one indicator must be located in the indicated zone. c *for additional information on our pb ? free strategy and soldering details, please download the on semiconductor soldering and mounting techniques reference manual, solderrm/d. soldering footprint* dim a min nom max millimeters 0.90 1.00 1.10 a1 0.01 0.06 0.10 b 0.25 0.38 0.50 c 0.10 0.18 0.26 d 2.90 3.00 3.10 e 2.50 2.75 3.00 e 0.85 0.95 1.05 l 0.20 0.40 0.60 0.25 bsc l2 ? 0 1 0 1.30 1.50 1.70 e1 e recommended note 5 l c m h l2 seating plane gauge plane detail z detail z 0.60 6x 3.20 0.95 6x 0.95 pitch dimensions: millimeters m style 1: pin 1. drain 2. drain 3. gate 4. source 5. drain 6. drain on semiconductor and the are registered trademarks of semiconductor components industries, llc (scillc) or its subsidia ries in the united states and/or other countries. scillc owns the rights to a number of pa tents, trademarks, copyrights, trade secret s, and other intellectual property. a listin g of scillc?s product/patent coverage may be accessed at www.onsemi.com/site/pdf/patent ? marking.pdf. scillc reserves the right to make changes without further notice to any products herein. scillc makes no warrant y, representation or guarantee regarding the suitability of it s products for any particular purpose, nor does scillc assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. ?typi cal? parameters which may be provided in scillc data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. all operating param eters, including ?typicals? must be validated for each customer application by customer?s technical experts. scillc does not convey any license under its patent rights nor the right s of others. scillc products are not designed, intended, or authorized for use as components in systems intended for surgic al implant into the body, or other applications intended to s upport or sustain life, or for any other application in which the failure of the scillc product could create a situation where personal injury or death may occur. should buyer purchase or use scillc products for any such unintended or unauthorized application, buyer s hall indemnify and hold scillc and its officers , employees, subsidiaries, affiliates, and dist ributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that scillc was negligent regarding the design or manufac ture of the part. scillc is an equal opportunity/affirmative action employer. this literature is subject to all applicable copyright laws and is not for resale in any manner. publication ordering information n. american technical support : 800 ? 282 ? 9855 toll free usa/canada europe, middle east and africa technical support: phone: 421 33 790 2910 japan customer focus center phone: 81 ? 3 ? 5817 ? 1050 ntgs4111p/d literature fulfillment : literature distribution center for on semiconductor p.o. box 5163, denver, colorado 80217 usa phone : 303 ? 675 ? 2175 or 800 ? 344 ? 3860 toll free usa/canada fax : 303 ? 675 ? 2176 or 800 ? 344 ? 3867 toll free usa/canada email : orderlit@onsemi.com on semiconductor website : www.onsemi.com order literature : http://www.onsemi.com/orderlit for additional information, please contact your local sales representative
|
