View LTW-5630AZL40_8850719.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

1 led middle power 5630 az l xx series bnc - od - c131/a4 created date : 05/26/200 7 rev ison : 1. 0 1 , 05/26/2008 led middle power 5630 product data sheet az l xx series created date : 03 / 01 / 20 13 revision : 7, 06 / 06 / 20 14
0 2 led middle power 5630 az l xx series bnc - od - c131/a4 created date : 03 / 01 /2 013 revisi o n : 7 , 06 / 06 /2 01 4 1. description the l iteon 5630 product series is a wide beam angle standard - dimension package , combining the lifetime and reliability advantages of light emitting diodes with the brightness of conventional lighting. it gives you total design freedom a nd unmatched brightness, creating a new opportunities for solid state lighting to displace conventional lighting technologies . 1.1 features ? package in 8 mm tape on 7" diameter reels. ? compatible with automatic placement equipment. ? compatible with infrared an d vapor phase reflow solder p rocess. ? eia std package. ? i.c. compatible. ? meet green product and pb - free(according to rohs) 1.2 available p art n umbers cct part number 6500 k ltw - 5630azl 65 5700 k ltw - 5630azl 57 5000 k ltw - 5630azl 50 4000 k ltw - 5630azl 40 350 0 k ltw - 5630azl 35 3000 k ltw - 5630azl 30 2700 k ltw - 5630azl 27
0 3 led middle power 5630 az l xx series bnc - od - c131/a4 created date : 03 / 01 /2 013 revisi o n : 7 , 06 / 06 /2 01 4 2 . outline dimensions part no. lens color source color ltw - 5630azl 65 orange ingan blue ltw - 5630azl 57 ltw - 5630azl 50 ltw - 5630azl 40 ltw - 5630azl 35 ltw - 5630azl 30 ltw - 5630azl 27 note s : 1. all dimensions are in millimeters. 2. tolerance is 0.2 mm (.008") unless otherwise noted.
0 4 led middle power 5630 az l xx series bnc - od - c131/a4 created date : 03 / 01 /2 013 revisi o n : 7 , 06 / 06 /2 01 4 3 . absolute maximum ratings at t a =25c parameter symbol code4 rating unit power
d i ssipation p o 700 mw continuous forward current i f 200 ma pulse forward current pulse forward current i f p 260 ma operating temperature range t opr - 40 ~ +8 5 c storage temperature range t stg - 40 ~ +100 c junction temperature t j Q 120 c notes : 1. 1/10 duty cycle, pulse width 100 s. 2. forbid to operating at reverse voltage condition for long. 3. it is recommended to follow de - rating curve to use maximum rating to ensure led can operated normally.
0 5 led middle power 5630 az l xx series bnc - od - c131/a4 created date : 03 / 01 /2 013 revisi o n : 7 , 06 / 06 /2 01 4 4.1 typical performance parameter symbol values unit test condition correlated color temp . cct typ. 2700 3000 3500 4000 5000 5700 6500 k chromaticity coordinates x typ. 0.458 0.434 0.408 0.382 0.345 0.329 0.312 - i f = 120ma y typ. 0.410 0.403 0.392 0.380 0.355 0.342 0.328 luminous flux 1 v min 41.0 42.5 44.0 4 4 .0 45. 5 4 4.0 4 2.5 lm typ. 50 53 54 55 54 55 53 max. 59.0 60.5 62.0 62.0 63.5 62.0 60.5 optical efficiency opt typ. 133 141 144 146 144 146 14 1 lm/w color rendering index cri min. 80 - viewing angle 2 1/2 typ. 120 deg forward voltage v f min 2.9 v typ. 3. 13 max. 3. 3 thermal resistance r jt typ. 1 5 c/w esd - withstand voltage esd min 5k hbm v notes 1. luminous flux is the total luminous flux output as measured with an integrating sphere. 2. iv (flux ? v ) classification code is marked on each packing bag. 3. the chromaticity coordinates (x, y) is derived from the 1931 cie chromaticity diagram. 4. caution in esd: static electricity and surge damages the led. it is recommended using a wrist band or anti - electrostatic glove when handling the led. all devices, equipment and machinery must be properly grounded. 5. cas140b is the test standard for the chromaticity coordinates (x, y) & ? v . 6. the chromaticity coordinates (x, y) guarantee should be added +/ - 0.01 tolerances 7. cri measurement allowance is 5 8. the t hermal r esistance is defined as the figure, r jt is the r th from t j to t hermal p ad s older : reference for thermal resistance : us ing 2.5x 2.5x 0.17 cm a luminum mcpcb, r jt = 1 5 c/w , r js = 19 c/w 4 . electro - optical characteristics
0 6 led middle power 5630 az l xx series bnc - od - c131/a4 created date : 03 / 01 /2 013 revisi o n : 7 , 06 / 06 /2 01 4 4.2 forward current vs. lumen and voltage current (ma) vf (v) lumen (lm) 2700k 3000k 3500k 4000k 5000k 5700k 6500k 20 2.76 9.2 9.8 10.0 10.2 10.0 10.1 9.9 40 2.85 18.1 19.3 19.7 20.0 19.7 20.0 19.3 60 2.93 26.6 28.3 28.8 29.3 28.8 29.2 28.2 80 3.00 34.5 36.9 37.5 38.1 37.4 38.1 36.9 100 3.06 42.4 45.1 45.9 46.7 45.9 46.7 45.0 120 3.13 50.0 53.0 54.0 55.0 54.0 55.0 53.0 140 3.19 57.0 60.5 61.6 62.9 61.7 62.8 60.6 160 3.25 64.0 68.0 69 .2 70.4 69.3 70.4 68.0 180 3.31 70.4 74.9 76.2 77.7 76.3 77.6 74.9 200 3.36 76.3 81.2 82.7 84.2 82.7 84.0 81.2
0 7 led middle power 5630 az l xx series bnc - od - c131/a4 created date : 03 / 01 /2 013 revisi o n : 7 , 06 / 06 /2 01 4 4.3 relative spectral power distribution at typical current 4.4 radiation characteristics 3000k 25degc 25degc 85degc 85degc 5 000k 0% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% relative intensity (%) 90 60 30 0 50 100 60 30 0
0 8 led middle power 5630 az l xx series bnc - od - c131/a4 created date : 03 / 01 /2 013 revisi o n : 7 , 06 / 06 /2 01 4 4.5 forward current vs. forward voltage 4.6 forward current derating c urve vs . ambient temperature 4.7 relative intensity vs . junction temperature
0 9 led middle power 5630 az l xx series bnc - od - c131/a4 created date : 03 / 01 /2 013 revisi o n : 7 , 06 / 06 /2 01 4 4.8 forward voltage vs . junction temperature
0 10 led middle power 5630 az l xx series bnc - od - c131/a4 created date : 03 / 01 /2 013 revisi o n : 7 , 06 / 06 /2 01 4 5 . binning definition 5.1 color bin 6500k 57 00k
0 11 led middle power 5630 az l xx series bnc - od - c131/a4 created date : 03 / 01 /2 013 revisi o n : 7 , 06 / 06 /2 01 4 50 00k 40 00k
0 12 led middle power 5630 az l xx series bnc - od - c131/a4 created date : 03 / 01 /2 013 revisi o n : 7 , 06 / 06 /2 01 4 35 00k 30 00k
0 13 led middle power 5630 az l xx series bnc - od - c131/a4 created date : 03 / 01 /2 013 revisi o n : 7 , 06 / 06 /2 01 4 27 00k
0 14 led middle power 5630 az l xx series bnc - od - c131/a4 created date : 03 / 01 /2 013 revisi o n : 7 , 06 / 06 /2 01 4 5.2 color rank 6500k ( i f = 12 0 ma) rank - x y rank - x y rank - x y k1 1 0.3048 0.3209 k3 1 0.3145 0.3187 k5 1 0.3098 0.3200 2 0.3028 0.3304 2 0.3138 0.3238 2 0.3081 0.3299 3 0.3117 0.3393 3 0.3177 0.3277 3 0.3166 0.3384 4 0.3124 0.3341 4 0.3172 0.3330 4 0.3177 0.3277 5 0.3081 0.3299 5 0.3213 0.3371 6 0.3089 0.3249 6 0.3221 0.3261 k2 1 0.3068 0.3113 k4 1 0.3117 0.3393 2 0.3048 0.3209 2 0.3205 0.3481 3 0.3089 0.3249 3 0.3213 0.3371 4 0.3098 0.3200 4 0.3172 0.3330 5 0.3138 0.3238 5 0.3166 0.3384 6 0.3145 0.3187 6 0.3124 0.3341 5700 k ( i f = 12 0 ma) rank - x y rank - x y rank - x y j1 1 0.3215 0.3353 j 3 1 0.3294 0.3306 j 5 1 0.3256 0.3331 2 0.3207 0.3462 2 0.3293 0.3364 2 0.3251 0.3444 3 0.3292 0.3539 3 0.3331 0.3398 3 0.3333 0.3518 4 0.3292 0.3481 4 0.3332 0.3458 4 0.3331 0.3398 5 0.3251 0.3444 5 0.3371 0.3493 6 0.3254 0.3388 6 0.3366 0.3369 j2 1 0.3222 0.3243 j 4 1 0.3292 0.3539 2 0.3215 0.3353 2 0.3376 0.3616 3 0.3254 0.3388 3 0.3371 0.3493 4 0.3256 0.3331 4 0.3332 0.3458 5 0.3293 0.3364 5 0.3333 0.3518 6 0.3294 0.3306 6 0.3292 0.3481 t olerance on each hue bin (x,y) is +/ - 0.01 . t olerance on each hue bin (x,y) is +/ - 0.01 .
0 15 led middle power 5630 az l xx series bnc - od - c131/a4 created date : 03 / 01 /2 013 revisi o n : 7 , 06 / 06 /2 01 4 5000 k ( i f = 12 0 ma) rank - x y rank - x y rank - x y h1 1 0.3371 0.3493 h 3 1 0.3441 0.3428 h 5 1 0.3407 0.3462 2 0.3376 0.3616 2 0.3446 0.3493 2 0.3416 0.3589 3 0.3464 0.3688 3 0.3485 0.3524 3 0.3500 0.3657 4 0.3458 0.3623 4 0.3493 0.3591 4 0.3485 0.3524 5 0.3416 0.3589 5 0.35 33 0.3624 6 0.3412 0.3525 6 0.3515 0.3487 h2 1 0.3366 0.3369 h 4 1 0.3464 0.3688 2 0.3371 0.3493 2 0.3551 0.3760 3 0.3412 0.3525 3 0.3533 0.3624 4 0.3407 0.3462 4 0.3493 0.3591 5 0.3446 0.3493 5 0.3500 0.3657 6 0.3441 0.3428 6 0.3458 0.3623 4000 k ( i f = 12 0 ma) rank - x y rank - x y rank - x y g1 1 0.3703 0.3726 g 3 1 0.3784 0.3647 g 5 1 0.3746 0.3689 2 0.3736 0.3874 2 0.3806 0.3725 2 0.3784 0.3841 3 0.3871 0.3959 3 0.3865 0.3762 3 0.3914 0.3922 4 0.3849 0.3881 4 0.3890 0.3842 4 0.3865 0.3762 5 0.3784 0.3841 5 0.3952 0.3880 6 0.3766 0.3765 6 0.3898 0.3716 g2 1 0.3670 0.3578 g 4 1 0.3871 0.3959 2 0.3703 0.3726 2 0.4006 0.4044 3 0.3766 0.3765 3 0.3952 0.3880 4 0.3746 0.3689 4 0.3890 0.3842 5 0.3806 0.3725 5 0.3914 0.3922 6 0.3784 0.3647 6 0.3849 0.3881 t olerance on each hue bin (x,y) is +/ - 0.01 . t olerance on each hue bin (x,y) is +/ - 0.01 .
0 16 led middle power 5630 az l xx series bnc - od - c131/a4 created date : 03 / 01 /2 013 revisi o n : 7 , 06 / 06 /2 01 4 3500 k ( i f = 12 0 ma) rank - x y rank - x y rank - x y f1 1 0.3943 0.3853 f 3 1 0.4018 0.3752 f 5 1 0.3983 0.3804 2 0.3996 0.4015 2 0.405 0 0.3837 2 0.4042 0.3970 3 0.4148 0.4090 3 0.4118 0.3869 3 0.4188 0.4041 4 0.4115 0.4006 4 0.4153 0.3955 4 0.4118 0.3869 5 0.4042 0.3970 5 0.4223 0.3990 6 0.4013 0.3887 6 0.4147 0.3814 f2 1 0.3889 0.3690 f 4 1 0.4148 0.4090 2 0 .3943 0.3853 2 0.4299 0.4165 3 0.4013 0.3887 3 0.4223 0.3990 4 0.3983 0.3804 4 0.4153 0.3955 5 0.4050 0.3837 5 0.4188 0.4041 6 0.4018 0.3752 6 0.4115 0.4006 3000 k ( i f = 12 0 ma) rank - x y rank - x y rank - x y e1 1 0.4223 0.3990 e 3 1 0.4260 0.3854 e 5 1 0.4244 0.3923 2 0.4299 0.4165 2 0.4303 0.3943 2 0.4324 0.4100 3 0.4431 0.4213 3 0.4361 0.3964 3 0.4451 0.4146 4 0.4388 0.4123 4 0.4406 0.4055 4 0.4361 0.3964 5 0.4324 0.4100 5 0.4468 0.4077 6 0.428 4 0.4011 6 0.4373 0.3893 e2 1 0.4147 0.3814 e 4 1 0.4431 0.4213 2 0.4223 0.3990 2 0.4562 0.4260 3 0.4284 0.4011 3 0.4468 0.4077 4 0.4244 0.3923 4 0.4406 0.4055 5 0.4303 0.3943 5 0.4451 0.4146 6 0.4260 0.3854 6 0.4388 0.4123 t olerance on each hue bin (x,y) is +/ - 0.01 . t olerance on each hue bin (x,y) is +/ - 0.01 .
0 17 led middle power 5630 az l xx series bnc - od - c131/a4 created date : 03 / 01 /2 013 revisi o n : 7 , 06 / 06 /2 01 4 2700 k ( i f = 12 0 ma) rank - x y rank - x y rank - x y d1 1 0.4468 0.4077 d 3 1 0.4483 0.3919 d 5 1 0.4477 0.3998 2 0.4562 0.4260 2 0.4534 0.4011 2 0.4576 0.4183 3 0.4688 0.4290 3 0.4591 0.4025 3 0.4697 0.4211 4 0.4636 0.4197 4 0. 4644 0.4118 4 0.4591 0.4025 5 0.4576 0.4183 5 0.4703 0.4132 6 0.4527 0.4090 6 0.4593 0.3944 d2 1 0.4373 0.3893 d 4 1 0.4688 0.4290 2 0.4468 0.4077 2 0.4813 0.4319 3 0.4527 0.4090 3 0.4703 0.4132 4 0.4477 0.3998 4 0.4644 0.4118 5 0.4534 0.4011 5 0.4697 0.4211 6 0.4483 0.3919 6 0.4636 0.4197 t olerance on each hue bin (x,y) is +/ - 0.01 .
0 18 led middle power 5630 az l xx series bnc - od - c131/a4 created date : 03 / 01 /2 013 revisi o n : 7 , 06 / 06 /2 01 4 5.3 flux bin 2700k ? v luminous flux spec. table ? 4 000k ? v luminous flux spec. table ? ? v bin ? lumen (lm) at i f = 12 0 ma ? v bin ? lumen (lm) at i f = 12 0 ma min max min max cf 4 1.0 4 5 .5 eh 4 4.0 4 8.5 fi 4 5 .5 5 0.0 hk 4 8.5 5 3.0 il 5 0.0 5 4.5 kn 5 3.0 57 .5 lo 54.5 59.0 nq 57.5 62.0 3000k ? v luminous flux spec. table ? 50 00k ? v luminous flux spec. table ? ? v bin ? lumen (lm) at i f = 12 0 ma ? v bin ? lumen (lm) at i f = 12 0 ma min max min max dg 42.5 47. 0 fi 45. 5 50.0 gj 47. 0 5 1 .5 il 50.0 5 4.5 jm 5 1 .5 5 6.0 lo 5 4.5 59 .0 mp 56.0 60.5 or 59.0 63.5 3500 k ? v luminous flux spec. table ? 5 7 00k ? v luminous flux spec. table ? ? v bin ? lumen (lm) at i f = 12 0 ma ? v bin ? lumen (lm) at i f = 12 0 ma min max min max eh 4 4.0 4 8.5 eh 4 4.0 4 8.5 hk 4 8.5 5 3.0 hk 4 8.5 5 3.0 kn 5 3.0 57 .5 kn 5 3.0 57 .5 nq 57.5 62.0 nq 57.5 62.0 ? 6500k ? v luminous flux spec. table ? ? ? v bin ? lumen (lm) at i f = 12 0 ma min max dg 42.5 47. 0 gj 47. 0 5 1 .5 jm 5 1 .5 5 6.0 mp 56.0 60.5 t olerance on each luminous flux bi n is +/ - 10 %.
0 19 led middle power 5630 az l xx series bnc - od - c131/a4 created date : 03 / 01 /2 013 revisi o n : 7 , 06 / 06 /2 01 4 code lm 2700k 3000k 3500k 4000k 5000k 5700k 6500k n o eh hk kn dg gj jm gj jm kn fi il lo nq nq il eh hk 53.0 eh hk kn 54.5 56.0 57.5 h cct c d e f g cf fi dg 60.5 62.0 i 41.0 42.5 44.0 45.5 47.0 i f =120 ma j 50.0 51.5 48.5 63.5 59.0 k p q mp lo mp nq or r l m
0 20 led middle power 5630 az l xx series bnc - od - c131/a4 created date : 03 / 01 /2 013 revisi o n : 7 , 06 / 06 /2 01 4 5.4 voltage bin v f spec. table v f bin forward voltage (volts) at i f = 12 0ma min max v1 2.9 3.1 v2 3.1 3.2 v3 3.2 3.3 tolerance on each forward vo ltage bin is +/ - 0. 1 v 6. bin code list example: v1 / hk / g5 forward voltage rank luminous flux rank color rank v1 hk g5
0 21 led middle power 5630 az l xx series bnc - od - c131/a4 created date : 03 / 01 /2 013 revisi o n : 7 , 06 / 06 /2 01 4 7 . r eflow soldering characteristics profile feature lead free assembly average ramp - up rate (t smax to t p ) 3c / second max preheat te mperature min (t smin ) 150c preheat temperature max (t smax ) 200c preheat time (t smin to t smax ) 60 C 180 seconds time maintained above temperature (t l ) 217c time maintained above time (t l ) 60 C 150 seconds peak / classification temperature (t p ) 260c time within 5c of actual peak temperature (t p ) 5 seconds ramp C down rate 6c / second max time 25c to peak temperature 8 minutes max notes: 1. the leds can be soldered using the reflow soldering or hand soldering method. the recommended hand solderi ng condition is 350 c max. and 2 secs max. for one time only, and the recommended reflow soldering condition is 260 c max. and 5 secs max. for three times max. 2. all temperatures refer to topside of the package, measured on the package body surface.
0 22 led middle power 5630 az l xx series bnc - od - c131/a4 created date : 03 / 01 /2 013 revisi o n : 7 , 06 / 06 /2 01 4 3. the s oldering condition referring to j - std - 020b. the storage ambient for the leds should not exceed 30 c temperature or 70% relative humidity. it is recommended that leds out of their original packaging are soldered within one week. for extended storage out of their original packaging, it is recommended that the leds were stored in a sealed container with appropriate desiccant, or desiccators with nitrogen ambient. if the leds were unpacked more than 168hrs, baking the leds at 60 for 24hrs before soldering pr ocess. 4. the soldering profile could be further referred to different soldering grease material characteristic. the grease vendor will provide this information. 5. a rapid - rate process is not recommended for the leds cooling down from the peak temperature. 6. alth ough the recommended reflow conditions are specified above, the reflow or hand soldering condition at the lowest possible temperature is desirable for the leds. 7. liteon cannot make a guarantee on the leds which have been already assembled using the dip sold ering method.
0 23 led middle power 5630 az l xx series bnc - od - c131/a4 created date : 03 / 01 /2 013 revisi o n : 7 , 06 / 06 /2 01 4 8 . reliability test no test item test condition duration number of damaged 1 steady state operating life of high temperature (htol) t s = 5 5 , i f =120ma 1000 hrs 0/20 2 steady state operating life of high temperature (htol) t s =85 , i f =120ma 1000 hrs 0/20 3 steady state operating life of high temperature (htol) t s = 5 5 , i f =1 8 0ma 1000 hrs 0/20 4 steady state operating life of high temperature (htol) t s =85 , i f =1 8 0ma 1000 hrs 0/20 5 steady state operating life of low temperature (ltol) ta= - 40 , i f =120ma 1000 hrs 0/20 6 pulse wet operating life of high temperature (pwhtol) 60 /90%rh, i f =120ma 30mins on/30min off 500 hrs 0/20 7 high temperature storage (hts) 100 1000 hrs 0/20 8 low temperature storage (lts) - 40 1000 hrs 0/20 9 therma l cycle (tc) - 40 ~100 30min dwell 5min transfer 200 cycle 0/20 10 thermal shock (ts) - 40 ~100 20min dwell 20sec transfer 200 cycle 0/20 11 solder resistance (sr) 265 , 3x msl 5sec 0/20 12 solder ability (sa) 245 5sec, 95% coverage 5sec 0/11 1 3 mechan ical shock (ms) 1500g 0.5msec pulse shock each 6 axis 0/6 1 4 random vibration (rv) 6g rms, 10 - 2000hz, 10min per axis 0/6 1 5 variable vibration frequency (vvf) 10 - 2000 - 10hz, log or linear sweep rate, 20g for 1 min, 1.5mm each apply 3x per axis over 6hrs 0 /6 1 6 salt spread (ss) 35 , 30g/m 2 /day 48hrs 0/11 criteria for judging the damage item symbol test condition criteria for judgment min. max. forward voltage v f i f = typical current u.s.l. x 1.1 luminous flux lm i f = typical current l.s.l. x 0.7 ccx&ccy x , y i f = typical curren t shift<0.02
0 24 led middle power 5630 az l xx series bnc - od - c131/a4 created date : 03 / 01 /2 013 revisi o n : 7 , 06 / 06 /2 01 4 9 . user guide ? cleaning do not use unspecified chemical liquid to clean led they could harm the package. if cleaning is necessary, immerse the led in ethyl alcohol or isopropyl alcohol at normal temperature for less than one minute. ? recommen d printed circuit board attachment pad infrared / vapor phase reflow soldering ? package dimensions of tape note: all dimensions are in millimeters (inches).
0 25 led middle power 5630 az l xx series bnc - od - c131/a4 created date : 03 / 01 /2 013 revisi o n : 7 , 06 / 06 /2 01 4 ? package dimensions of reel notes: 1. empty component pocket s sealed with top cover tape. 2. 7 inch reel - 30 00 pieces per reel. 3. minimum packing quantity is 500 pieces for remainders. 4. the maximum number of consecutive missing lamps is two. 5. in accordance with eia - 481 - 1 - b specifications.
0 26 led middle power 5630 az l xx series bnc - od - c131/a4 created date : 03 / 01 /2 013 revisi o n : 7 , 06 / 06 /2 01 4 1 0 . cautions 1 0 .1 application the leds described here are intended to be used for ordinary electronic equipment (such as office equipment, communication equipment and household applications).consult liteons sales in advance for information on applications in which excep tional reliability is required, particularly when the failure or malfunction of the leds may directly jeopardize life or health (such as in aviation, transportation, traffic control equipment, medical and life support systems and safety devices). 1 0 . 2 sto rage t his product is qualified as moisture sensitive level 3 per jedec j - std - 020 precaution when handing this moisture sensitive product is important to ensure the reliability of the product. the package is sealed : the leds should be stored at 30 c or l ess and 90 % rh or less . and the leds are limited to use within one year, while the leds is packed in moisture - proof package with the desiccants inside. the package is opened : the leds should be stored at 30 c or less and 60 % rh or less . moreover , the leds are lim ited to solder process within 168 hrs. if exceed ing the storage limiting time since opened, that we recommended to baking leds at 60 c at least 24hrs. to seal the remainder leds return to package, it s recommended to be with workable desiccants in original package. 1 0 . 3 cleaning use alcohol - based cleaning solvents such as isopropyl alcohol to clean the led if necessary. 1 0 . 4 drive mode an led is a current - operated device. in order to ensure intensity uniformity on multiple leds connected in parallel in an application, it is recommended that a current limiting resistor be incorporated in the drive circuit, in series with each led as shown in circuit a below circuit model a circuit model b
0 27 led middle power 5630 az l xx series bnc - od - c131/a4 created date : 03 / 01 /2 013 revisi o n : 7 , 06 / 06 /2 01 4 (a) recommended circuit. (b) the brightness of each led might app ear different due to the differences in the i - v characteristics of those leds. 1 0 . 5 esd (electrostatic discharge) static electricity or power surge will damage the led. suggestions to prevent esd damage: use of a conductive wrist band or anti - electrostati c glove when handling these leds. all devices, equipment, and machinery must be properly grounded. work tables, storage racks, etc. should be properly grounded. use ion blower to neutralize the static charge which might have built up on surface of the led s plastic lens as a result of friction between leds during storage and handling. esd - damaged leds will exhibit abnormal characteristics such as high reverse leakage current, low forward voltage, or no lightup at low currents.to verify for esd damage, ch eck for light up and v f of the suspect leds at low currents.the v f of good leds should be >2.0v@0.1ma for ingan product and >1.4v@0.1ma for alingap product. 1 0 .6 suggested c hecking l ist : training and certification 1. everyone working in a static - safe area is esd - certified? 2. training records kept and re - certification dates monitored? static - safe workstation & work areas 1. static - safe workstation or work - areas have esd signs? 2. all surfaces and objects at all static - safe workstation and within 1 f t measure less than 100v? 3. all ionizer activated, positioned towards the units? 4. each work surface mats grounding is good? personnel grounding 1. every person (including visitors) handling esd sensitive (esds) items wear wrist strap, heel strap or condu ctive shoes with conductive flooring? 2. if conductive footwear used, conductive flooring also present where operator stand or walk?
0 28 led middle power 5630 az l xx series bnc - od - c131/a4 created date : 03 / 01 /2 013 revisi o n : 7 , 06 / 06 /2 01 4 3. garments, hairs or anything closer than 1 ft to esd items measure less than 100v*? 4. every wrist strap or heel strap/cond uctive shoes checked daily and result recorded for all dls? 5. all wrist strap or heel strap checkers calibration up to date? note: *50v for blue led. device handling 1. every esds items identified by eia - 471 labels on item or packaging? 2. all esds item s completely inside properly closed static - shielding containers when not at static - safe workstation? 3. no static charge generators (e.g. plastics) inside shielding containers with esds items? 4. all flexible conductive and dissipative package mate rials in spected before reuse or recycle? others 1. audit result reported to entity esd control coordinator? 2. corrective action from previous audits completed? 3. are audit records complete and on file? 1 0 .7 others: do not put any pressure on the light emittin g surface either by finger or any hand tool and do not stack the products. stress or pressure may cause damage to the wires of the led array. this product is not designed for the use under any of the following conditions, please confirm the performance and reliability are well enough if you use it under any of the following conditions do not use sulfur - containing materials in commercial products including the materials such as seals and adhesives that may contain sulfur. do not put this product in a place w ith a lot of moisture (over 85% relative humidity), dew condensation, briny air, and corrosive gas (cl, h 2 s, nh 3 , so 2 , no x , etc.), exposure to a corrosive environment may affect silver plating. the appearance and specifications of the product may be modifi ed for improvement without prior notice.

▲Up To Search▲

Price & Availability of LTW-5630AZL40

	To Download LTW-5630AZL40 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .