filename: tfs 110ac.doc version 1.2 26.05.2010 vectron international filter specification tfs 110ac 1/5 vectron international gmbh & co. kg potsdamer stra?e 18 d 14 513 teltow / germany tel: (+49) 3328 4784-0 / fax: (+49) 3328 4784-30 e-mail: tft@v e ctro n.co m vectron international gmbh & co. kg reserves the right to ma ke changes to the product(s) and/or information contained herein w i thout notice. no liability is assumed as a result of their use or application. no rights under any patent accompany the sale of any such product(s) or information. measurement condition ambient temperature: 25 c input pow er level: 0 dbm terminating impedance: * input: 450 ? || -0,9 pf output: 450 ? || -0,9 pf source impedance: 50 ? load impedance: 50 ? ch aracteristics remark: the reference lev e l for the relativ e attenuation a rel of the tfs 110ac is the mini mum of the pass band attenuation a min . the minimum of the pass band attenuation a min is defined as the insertion loss a e . the centre frequency f c is the arithmetic mean v a lue of the upper and low e r frequencies at the 3 db filter attenuation lev e l relativ e to the insertion loss a e . the nominal frequency f n is fix ed at 110,6 mhz w i thout any tolerance. t he giv en v a lues for both the relativ e attenuation a rel and the group delay ripple hav e to be achiev ed at the frequencies giv en below ev en if the centre frequency f c is shifted due to the temperature coefficient of frequency tc f in the operating temperature range and due to a production tolerance for the centre frequency f c . d a t a ty p. v a lue tolerance / limit insertion loss a e 4 , 2 d b m a x . 5 , 0 d b (reference level) nominal frequency f n 1 1 0 , 6 m h z centre frequency f c 110,603 m h z - passband p b - f n 5,0 khz pass band ripple (p-p) 0 , 4 d b m a x . 1 , 5 d b relativ e attenuation a rel f n . . . f n 5 k h z 0 , 4 d b m a x . 1 , 5 d b f n . . . f n 1 0 k h z 0 , 6 d b m a x . 3 d b f n - 1 2 0 k h z . . . f n - 6 0 k h z 3 3 d b m i n . 2 5 d b f n + 6 0 k h z . . . f n + 1 2 0 k h z 3 3 d b m i n . 2 5 d b input pow er lev e l max. 10 dbm operating temperature range otr - 0 c ... + 50 c storage temperature range - -40 c ... + 85 c frequency inv e rsion temperature 3 5 c - temperature coefficient of frequency t c f ** -0,035 ppm/k 2 - *) the terminating impedances depend on paras itics and q-v a lues of matching element s and the board used, and are to be understo od as reference v a lues only . should there be additional ques tions do not hesitate to ask for an applic ation note or contac t our design team. **) ? f c (hz) = tc f (ppm/k 2 ) x (t - t o ) 2 x f to (mhz). ge ne ra te d: ch ecked / a p p r o v ed :
filename: tfs 110ac.doc version 1.2 26.05.2010 vectron international filter specification tfs 110ac 2/5 vectron international gmbh & co. kg potsdamer stra?e 18 d 14 513 teltow / germany tel: (+49) 3328 4784-0 / fax: (+49) 3328 4784-30 e-mail: tft@v e ctro n.co m vectron international gmbh & co. kg reserves the right to ma ke changes to the product(s) and/or information contained herein w i thout notice. no liability is assumed as a result of their use or application. no rights under any patent accompany the sale of any such product(s) or information. f ilter ch aracteristic 11 0. 1 11 0. 2 11 0. 3 11 0. 4 11 0. 5 1 10. 6 11 0. 7 11 0. 8 11 0. 9 11 1 11 1. 1 -8 0 -7 0 -6 0 -5 0 -4 0 -3 0 -2 0 -1 0 0 f r equenc y i n m h z m a gni t u d e i n db in s e r t i o n l o s s : -3 .4 6 d b 11 0 . 55 11 0. 56 11 0. 57 11 0. 58 11 0. 59 11 0. 6 11 0. 61 11 0. 62 11 0. 63 11 0. 64 11 0. 65 -5 -4 . 5 -4 -3 . 5 -3 -2 . 5 -2 -1 . 5 -1 -0 . 5 0 f r equency i n m h z m a gni t u d e i n db 11 0 . 55 11 0. 56 11 0. 57 11 0. 58 11 0. 59 11 0. 6 11 0. 61 11 0. 62 11 0. 63 11 0. 64 11 0. 65 10 11 12 13 14 15 16 17 18 19 20 f r equency i n m h z delay in s cons truc tion a nd pin c onne c t ion (all dimensions in mm) 1 ground 2 ground 3 ground 4 ground 5 output 6 output 7 ground 8 ground 9 ground 10 ground 11 input 12 input 13,6m a x . 6, 8m a x . 1 2, 0 m a x . 8 9 10 1, 5 2, 54 0 , 1 5 2,54 0 , 1 5 0, 8 0, 1 1 2 3 4 5 6 7 11 12 da t e c ode tfs 110ac ? a21 date code: y ear + w eek a 2010 b 2011 c 2012 ? 100 ? t est circu i t c1 l1 l3 sa w l2 l4 c2 12 6 5 11 1, 2, 3, 4, 7, 8, 9, 10
filename: tfs 110ac.doc version 1.2 26.05.2010 vectron international filter specification tfs 110ac 3/5 vectron international gmbh & co. kg potsdamer stra?e 18 d 14 513 teltow / germany tel: (+49) 3328 4784-0 / fax: (+49) 3328 4784-30 e-mail: tft@v e ctro n.co m vectron international gmbh & co. kg reserves the right to ma ke changes to the product(s) and/or information contained herein w i thout notice. no liability is assumed as a result of their use or application. no rights under any patent accompany the sale of any such product(s) or information. stability characteristics, reliability after the follow i ng tests the filter shall meet the w hole specification: 1. shock: 500g, 1 ms, half sine w a ve, 3 shocks each plane; din iec 68 t2 - 27 2. vibration: 10 hz to 500 hz, 0,35 mm or 5 g respecti vely , 1 octave per min, 10 cy cles per plan, 3 plans; din iec 68 t2 - 6 3. change of temperature: -55 c to 125c / 30 min. each / 10 cy cles din iec 68 part 2 ? 14 test n 4. resistance to solder heat (reflow ): reflow possible: three times max.; for temperature conditions refer to the attac hed "air reflow temperature conditions" on page 4; 5. esd ansi/esd s20.20-1999 , class 1a for hbm this filter is rohs compliant (2002/95/eg, 2005/618/eg) packin g tape & reel: iec 286 ? 3, w i th exeption of value for n and minimum bending radius; tape ty pe ii, embossed carrier tape w i th top cover tape on the upper side; max. pieces of filters peer reel: 1700 reel of empty components at start: min. 300 mm reel of empty components at start including leader: min. 500 mm trailer: min. 300 mm g do w ct f e g d1 p2 p1 po bo ao p u ll o f f d i re c t io n pin m a rk er ty p da t e c o d e ko t tape (al l di mensi ons i n mm) w : 24,00 +0,30/-0,10 po : 4,00 0,1 do : 1,50 +0,1/-0 e : 1,75 0,10 f : 11,50 0,10 g(min) : 0,60 p2 : 2,00 0,1 p1 : 12,00 0,1 d1(min) : 1,50 a o : 7,10 0,10 bo : 13,90 0,10 ct : 21,5 0,1 a c n w 1 w 2 r eel (all d i men s io n s in mm) a : 330 w 1 : 24,4 +2/-0 w 2 (max ) : 30,4 n(min) : 60 c : 13,0 +0,5/-0,2 the minimum bending radius is 45 mm.
filename: tfs 110ac.doc version 1.2 26.05.2010 vectron international filter specification tfs 110ac 4/5 vectron international gmbh & co. kg potsdamer stra?e 18 d 14 513 teltow / germany tel: (+49) 3328 4784-0 / fax: (+49) 3328 4784-30 e-mail: tft@v e ctro n.co m vectron international gmbh & co. kg reserves the right to ma ke changes to the product(s) and/or information contained herein w i thout notice. no liability is assumed as a result of their use or application. no rights under any patent accompany the sale of any such product(s) or information. a i r re flow te mpe r a t ure c onditions conditions exposure average ramp-up rate (30c to 217c) less than 3c/second > 100c betw een 300 and 600 seconds > 150c betw een 240 and 500 seconds > 217c betw een 30 and 150 seconds peak temperature max. 260c time w i thin 5c of actual peak temperature betw een 10 and 30 seconds cool-dow n rate (peak to 50c) less than 6c/second time from 30c to peak temperature no greater than 300 seconds chip-mount air reflow profile temperature / c max. 260c 217c time / s max. 300 s 10 ... 30 s 30 ... 150 s
filename: tfs 110ac.doc version 1.2 26.05.2010 vectron international filter specification tfs 110ac 5/5 vectron international gmbh & co. kg potsdamer stra?e 18 d 14 513 teltow / germany tel: (+49) 3328 4784-0 / fax: (+49) 3328 4784-30 e-mail: tft@v e ctro n.co m vectron international gmbh & co. kg reserves the right to ma ke changes to the product(s) and/or information contained herein w i thout notice. no liability is assumed as a result of their use or application. no rights under any patent accompany the sale of any such product(s) or information. history version reason of changes name date 1.0 generation of development s pecification raura 08.02.2010 1.1 nominal frequency , centre frequency and frequenc y inversion temperature changed raura 12.02.2010 1.2 generation of filter secification martens 26.05.2010 added ty pical values added input / output impedances added filter characteristic
|