acp-4010 quiet 4u rackmount chassis for atx/ceb/eeb motherboard or full-size shb/sbc with dual system support ? supports either an atx/ceb/eeb single/dual processors motherboard or a picmg backplane with up to 15 slots ? supports one or two systems in a single chassis ? shock-resistant disk drive bay design holds up to two 5.25" and two 3.5" disk drives ? led indicators and alarm notifcation for system fault detection ? low noise system fans ? built-in intelligent system module enables whole system fan control and remote manageability specifcations drive bay external internal 5.25" 2 - 3.5" 1 1 cooling fan 2 (12 cm /85 cfm each) air filter yes front i/o interface usb 2.0 4 9-pin d-sub 2 (reserved) miscellaneous led indicators power, hdd, temperature, fan, lan1, and lan2 rear panel backplane version: one 9-pin d-sub opening motherboard version: five 9-pin d-sub and one 68-pin scsi openings intelligent system module remote monitoring cpu/system fan speed , cpu/system temperature , motherboard voltage (only selected advantech mbs/cpu cards with susiaccess installed can fully enable these functions, check with advantech local rep. for detailed information.) environment operating non-operating temperature 0 ~ 40 c (32 ~ 104 f) -20 ~ 60 c (-4 ~ 140 f) humidity 10 ~ 85% @ 40 c, non-condensing 10 ~ 95% @ 40 c, non-condensing vibration (5 ~ 500 hz) 1 grms 2 g shock 10 g (with 11 ms duration, half sine wave) 30 g physical characteristics dimensions (w x h x d) 482 x 177 x 479 mm (19" x 7.0" x 18.9") weight 16.6 kg (36.5 lb) *installation of all 15 full-size cards will sacrifce the two 3.5"disk drive bays. *while an eeb motherboard is installed in the chassis, only one 3.5" and two 5.25" disk drive bays are available. two 5.25" drive bays two 3.5" drive bays (int. x 1 & ext. x 1) two reset buttons for dual systems two 9-pin d-sub openings reserved four usb ports easy-to-maintain dual fans front view inside view rohs compliant 2002/95/ec all product specifications are subject to change without notice last updated : 23-sep-2014 industrial computer chassis features
acp-4010 ordering information model name description backplane version ACP-4010BP-00BE without psu with atx switch motherboard version acp-4010mb-00be without psu with atx switch power supply options (for detailed power supply specs, please refer to chapter 13) part number 80 plus grade wattage type input ps8-300atx-zbe bronze 300w single ac 100 ~ 240 v (full range) ps8-400atx-ze bronze 400w single ac 100 ~ 240 v (full range) ps8-700atx-ze bronze 700w single ac 100 ~ 240 v (full range) rps8-350atx-xe gold 350w 1+1 redundant ac 100 ~ 240 v (full range) rps8-500atx-xe bronze 500w 1+1 redundant ac 100 ~ 240 v (full range) rps8-750atx-xe gold 750w 1+1 redundant ac 100 ~ 240 v (full range) optional accessories part number description idt-3120e mobile rack for converting a 3.5" drive bay to dual 2.5" sata hdd trays idt-5230e mobile rack for converting dual 5.25" drive bays to three 3.5" sas/sata hdd trays spare parts part number description 1990001299 fan flter 95 x 130 mm 1990001298 door flter 150 x 68 mm dimensions unit: mm [inch] 426 [16.8] 177 [7.0] 426 [16.8] 482 [19.0] 101.6 [4.0] 465 [18.3] 492.3 [19.4] 477.4 [18.8] 92 [3.6] 92 [3.6] 92 [3.6] 98 [3.9] bp version mb version www.advantech.com/products online download
|
