jan.1.2017 copyright 2017 hirose electric co., ltd. all rights reserved. nov.1.2016 copyright 2016 hirose electric co., ltd. all rights reserved. b129 3.96mm pitch connector directly mounted on board df6 series features 1. service efficiency up conventional thick cables are directly mounted on the board piece by piece, but connecterization has achieved soldering services in a batch. this product enhances soldering service efficiency. 2. miniaturization this product achieves miniaturization for thick cables. mounting height on board : 7.5mm width : 5.0mm 3. board prefixed mechanism since the connector is softly press-fitted to the board for insertion, it can be prefixed to the board. applications secondary power supply units for various equipment prefixed mechanism height: 7.5mm width: 4.6mm the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative. nov.1.2016 copyright 2016 hirose electric co., ltd. all rights reserved. b130 df6 series 3.96mm pitch connector directly mounted on board product specifications rating current rating (note 1) voltage rating awg 18 : 5a cable size awg 20 : 4a awg 22 : 3a 300v ac operating temperature range operating moisture range storage temperature range storage humidity range -35 to + 85 ? (note 1) 40 to 80% -10 to + 60 ? (note 2) 40 to 70% (note 2) note 1: the rated current will be changed according to cable sizes for use. note 2: includes temperature rise caused by current flow. note 3: the term "storage" refers to products stored for long period of time prior to mounting and use. operating temperature r ange and humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation. note 4: information contained in this catalog represents general requirements for this series.contact us for the drawings and s pecifications for a specific part number shown. item specification condition 1.insulation resistance 1000m ohms min. 500v dc 2.withstanding voltage no flashover or insulation breakdown. 1500v ac/1 minute 3.contact resistance 15m ohms max. 100ma 4.vibration no damage, cracks, or parts looseness. frequency: 10 to 55 hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions. 5. humidity (steady state) no damage, cracks, or parts looseness. 96 hours at temperature of 40? and humidity of 90% to 95% 6.temperature cycle no damage, cracks, or parts looseness. (-55 ? : 30 minutes ? 15 to 35 ? : 10 minutes ? 85 ? : 30 minutes ? 5 to 35 ? : 10 minutes ) 5 cycles 7. resistance to soldering heat no deformation of components affecting performance. flow: 250? for 10 seconds manual soldering: 300? for 3 seconds material product part material finish remarks crimping plug insulator polyamide white ul94v-0 crimping contact for plug brass copper alley tin plated ________ ordering information df6 - * p - 3.96 c qe wrt r contact pitch: 3.96mm t c: crimping plug q series name : df 6 w number of contacts: 1 ~ 8, 10 e connector type p: plug crimping plug df6a - 1822 pcf qwe e packaging type pcf: plug contact, reel packaging sc: plug contact, bag packaging q applicable cable type none : jacket dia. 1.5mm to 2.2mm ul 1007 a : jacket dia. 2.2mm to 2.9mm ul 1015 w applicable cable size 1822 : awg#18~#22 crimping contact the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative. nov.1.2016 copyright 2016 hirose electric co., ltd. all rights reserved. b131 df6 series 3.96mm pitch connector directly mounted on board precrimping plug photo: contact inserted crimping contact part number cl no. number of contacts a b rohs df6- 1p-3.96c 546-0001-1 1 4.92 _____ df6- 2p-3.96c 546-0002-4 2 8.88 3.96 df6- 3p-3.96c 546-0003-7 3 12.84 7.92 df6- 4p-3.96c 546-0004-0 4 16.80 11.88 df6- 5p-3.96c 546-0005-2 5 20.76 15.84 yes df6- 6p-3.96c 546-0006-5 6 24.72 19.80 df6- 7p-3.96c 546-0007-8 7 28.68 23.76 df6- 8p-3.96c 546-0008-0 8 32.64 27.72 df6-10p-3.96c 546-0011-5 10 40.56 35.64 typeitem part number cl no. applicable contact applicator ap105-df6-1822p 901-4505-9 df6 -1822pcf ( 05 ) ap105-df6a-1822p 901-4520-2 df6a-1822pcf ( 05 ) press unit cm-105 901-0005-4 ________ manual crimping df6 -ta1822hc 550-0174-9 df6 -1822pc ( 05 ) tool df6a-ta1822hc 550-0222-0 df6a-1822pc ( 05 ) extraction tool df-c-po(a) 550-0170-8 df6/df6a-1822pc ( f )( 05 ) contact view for insertion note: a packaging quantity is delivered by the bag unit (100 pcs.). note 1. the applicable cable conductor is a tin plated and annealed copper wire. note 2. if other cables are used instead of the applicable cable, contact the hirose sales department. note: if any trouble has been caused due to other tools, which are not designated by hirose, hirose never guarantee any product s. slip length df6-1822pc (f): 2.1mm to 2.6mm df6a-1822pc (f): 2.3mm to 2.8mm applicable through-hole: 1.8 +0.15 0 b applicable crimping tools applicable cable part number cl no. packaging type quantity a b c ul style jacket dia. awg size contact construct df6 -1822pcf(05) 546-0009-3-05 reel 5,000 1007 1.5 to 2.2mm awg 18 34 cores/0.18mm 10.2 1.5 1.2 df6 -1822pc(05) 546-0010-2-05 bag 100 awg 20 21 cores/0.18mm df6a-1822pcf(05) 546-0013-0-05 reel 3,000 1015 2.2 to 2.9mm awg 22 17 cores/0.16mm 10.5 1.7 1.4 df6a-1822pc(05) 546-0014-3-05 bag 100 rohs yes the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative. nov.1.2016 copyright 2016 hirose electric co., ltd. all rights reserved. powered by tcpdf (www.tcpdf.org) b132 df6 series 3.96mm pitch connector directly mounted on board b precautions 1.recommended soldering condition 2.cleaning condition 3.connecting condition 4.precations flow: 250? for 3 seconds manual soldering: 290? for 2 seconds after soldering, if a load is given to the cable where connector and cable contain heat, the jacket holding member will be loosened. after soldering, the operation should be performed, after connector returns to room temperature. refer to the "nylon connector use hand book". don't use solvent to degrade the cable jacket like trichloroethane. in addition, avoid heat cleaning with solvent. refer to the "nylon connector use hand book". slight discoloration on the insulating materials will not affect form, fit or function of the connectors. refer to "nylon connector use handbook" the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
jan.1.2017 copyright 2017 hirose electric co., ltd. all rights reserved. nov.1.2016 copyright 2016 hirose electric co., ltd. all rights reserved. b129 3.96mm pitch connector directly mounted on board df6 series features 1. service efficiency up conventional thick cables are directly mounted on the board piece by piece, but connecterization has achieved soldering services in a batch. this product enhances soldering service efficiency. 2. miniaturization this product achieves miniaturization for thick cables. mounting height on board : 7.5mm width : 5.0mm 3. board prefixed mechanism since the connector is softly press-fitted to the board for insertion, it can be prefixed to the board. applications secondary power supply units for various equipment prefixed mechanism height: 7.5mm width: 4.6mm the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative. nov.1.2016 copyright 2016 hirose electric co., ltd. all rights reserved. b130 df6 series 3.96mm pitch connector directly mounted on board product specifications rating current rating (note 1) voltage rating awg 18 : 5a cable size awg 20 : 4a awg 22 : 3a 300v ac operating temperature range operating moisture range storage temperature range storage humidity range -35 to + 85 ? (note 1) 40 to 80% -10 to + 60 ? (note 2) 40 to 70% (note 2) note 1: the rated current will be changed according to cable sizes for use. note 2: includes temperature rise caused by current flow. note 3: the term "storage" refers to products stored for long period of time prior to mounting and use. operating temperature r ange and humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation. note 4: information contained in this catalog represents general requirements for this series.contact us for the drawings and s pecifications for a specific part number shown. item specification condition 1.insulation resistance 1000m ohms min. 500v dc 2.withstanding voltage no flashover or insulation breakdown. 1500v ac/1 minute 3.contact resistance 15m ohms max. 100ma 4.vibration no damage, cracks, or parts looseness. frequency: 10 to 55 hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions. 5. humidity (steady state) no damage, cracks, or parts looseness. 96 hours at temperature of 40? and humidity of 90% to 95% 6.temperature cycle no damage, cracks, or parts looseness. (-55 ? : 30 minutes ? 15 to 35 ? : 10 minutes ? 85 ? : 30 minutes ? 5 to 35 ? : 10 minutes ) 5 cycles 7. resistance to soldering heat no deformation of components affecting performance. flow: 250? for 10 seconds manual soldering: 300? for 3 seconds material product part material finish remarks crimping plug insulator polyamide white ul94v-0 crimping contact for plug brass copper alley tin plated ________ ordering information df6 - * p - 3.96 c qe wrt r contact pitch: 3.96mm t c: crimping plug q series name : df 6 w number of contacts: 1 ~ 8, 10 e connector type p: plug crimping plug df6a - 1822 pcf qwe e packaging type pcf: plug contact, reel packaging sc: plug contact, bag packaging q applicable cable type none : jacket dia. 1.5mm to 2.2mm ul 1007 a : jacket dia. 2.2mm to 2.9mm ul 1015 w applicable cable size 1822 : awg#18~#22 crimping contact the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative. nov.1.2016 copyright 2016 hirose electric co., ltd. all rights reserved. b131 df6 series 3.96mm pitch connector directly mounted on board precrimping plug photo: contact inserted crimping contact part number cl no. number of contacts a b rohs df6- 1p-3.96c 546-0001-1 1 4.92 _____ df6- 2p-3.96c 546-0002-4 2 8.88 3.96 df6- 3p-3.96c 546-0003-7 3 12.84 7.92 df6- 4p-3.96c 546-0004-0 4 16.80 11.88 df6- 5p-3.96c 546-0005-2 5 20.76 15.84 yes df6- 6p-3.96c 546-0006-5 6 24.72 19.80 df6- 7p-3.96c 546-0007-8 7 28.68 23.76 df6- 8p-3.96c 546-0008-0 8 32.64 27.72 df6-10p-3.96c 546-0011-5 10 40.56 35.64 typeitem part number cl no. applicable contact applicator ap105-df6-1822p 901-4505-9 df6 -1822pcf ( 05 ) ap105-df6a-1822p 901-4520-2 df6a-1822pcf ( 05 ) press unit cm-105 901-0005-4 ________ manual crimping df6 -ta1822hc 550-0174-9 df6 -1822pc ( 05 ) tool df6a-ta1822hc 550-0222-0 df6a-1822pc ( 05 ) extraction tool df-c-po(a) 550-0170-8 df6/df6a-1822pc ( f )( 05 ) contact view for insertion note: a packaging quantity is delivered by the bag unit (100 pcs.). note 1. the applicable cable conductor is a tin plated and annealed copper wire. note 2. if other cables are used instead of the applicable cable, contact the hirose sales department. note: if any trouble has been caused due to other tools, which are not designated by hirose, hirose never guarantee any product s. slip length df6-1822pc (f): 2.1mm to 2.6mm df6a-1822pc (f): 2.3mm to 2.8mm applicable through-hole: 1.8 +0.15 0 b applicable crimping tools applicable cable part number cl no. packaging type quantity a b c ul style jacket dia. awg size contact construct df6 -1822pcf(05) 546-0009-3-05 reel 5,000 1007 1.5 to 2.2mm awg 18 34 cores/0.18mm 10.2 1.5 1.2 df6 -1822pc(05) 546-0010-2-05 bag 100 awg 20 21 cores/0.18mm df6a-1822pcf(05) 546-0013-0-05 reel 3,000 1015 2.2 to 2.9mm awg 22 17 cores/0.16mm 10.5 1.7 1.4 df6a-1822pc(05) 546-0014-3-05 bag 100 rohs yes the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative. nov.1.2016 copyright 2016 hirose electric co., ltd. all rights reserved. powered by tcpdf (www.tcpdf.org) b132 df6 series 3.96mm pitch connector directly mounted on board b precautions 1.recommended soldering condition 2.cleaning condition 3.connecting condition 4.precations flow: 250? for 3 seconds manual soldering: 290? for 2 seconds after soldering, if a load is given to the cable where connector and cable contain heat, the jacket holding member will be loosened. after soldering, the operation should be performed, after connector returns to room temperature. refer to the "nylon connector use hand book". don't use solvent to degrade the cable jacket like trichloroethane. in addition, avoid heat cleaning with solvent. refer to the "nylon connector use hand book". slight discoloration on the insulating materials will not affect form, fit or function of the connectors. refer to "nylon connector use handbook" the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
jan.1.2017 copyright 2017 hirose electric co., ltd. all rights reserved. nov.1.2016 copyright 2016 hirose electric co., ltd. all rights reserved. b129 3.96mm pitch connector directly mounted on board df6 series features 1. service efficiency up conventional thick cables are directly mounted on the board piece by piece, but connecterization has achieved soldering services in a batch. this product enhances soldering service efficiency. 2. miniaturization this product achieves miniaturization for thick cables. mounting height on board : 7.5mm width : 5.0mm 3. board prefixed mechanism since the connector is softly press-fitted to the board for insertion, it can be prefixed to the board. applications secondary power supply units for various equipment prefixed mechanism height: 7.5mm width: 4.6mm the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative. nov.1.2016 copyright 2016 hirose electric co., ltd. all rights reserved. b130 df6 series 3.96mm pitch connector directly mounted on board product specifications rating current rating (note 1) voltage rating awg 18 : 5a cable size awg 20 : 4a awg 22 : 3a 300v ac operating temperature range operating moisture range storage temperature range storage humidity range -35 to + 85 ? (note 1) 40 to 80% -10 to + 60 ? (note 2) 40 to 70% (note 2) note 1: the rated current will be changed according to cable sizes for use. note 2: includes temperature rise caused by current flow. note 3: the term "storage" refers to products stored for long period of time prior to mounting and use. operating temperature r ange and humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation. note 4: information contained in this catalog represents general requirements for this series.contact us for the drawings and s pecifications for a specific part number shown. item specification condition 1.insulation resistance 1000m ohms min. 500v dc 2.withstanding voltage no flashover or insulation breakdown. 1500v ac/1 minute 3.contact resistance 15m ohms max. 100ma 4.vibration no damage, cracks, or parts looseness. frequency: 10 to 55 hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions. 5. humidity (steady state) no damage, cracks, or parts looseness. 96 hours at temperature of 40? and humidity of 90% to 95% 6.temperature cycle no damage, cracks, or parts looseness. (-55 ? : 30 minutes ? 15 to 35 ? : 10 minutes ? 85 ? : 30 minutes ? 5 to 35 ? : 10 minutes ) 5 cycles 7. resistance to soldering heat no deformation of components affecting performance. flow: 250? for 10 seconds manual soldering: 300? for 3 seconds material product part material finish remarks crimping plug insulator polyamide white ul94v-0 crimping contact for plug brass copper alley tin plated ________ ordering information df6 - * p - 3.96 c qe wrt r contact pitch: 3.96mm t c: crimping plug q series name : df 6 w number of contacts: 1 ~ 8, 10 e connector type p: plug crimping plug df6a - 1822 pcf qwe e packaging type pcf: plug contact, reel packaging sc: plug contact, bag packaging q applicable cable type none : jacket dia. 1.5mm to 2.2mm ul 1007 a : jacket dia. 2.2mm to 2.9mm ul 1015 w applicable cable size 1822 : awg#18~#22 crimping contact the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative. nov.1.2016 copyright 2016 hirose electric co., ltd. all rights reserved. b131 df6 series 3.96mm pitch connector directly mounted on board precrimping plug photo: contact inserted crimping contact part number cl no. number of contacts a b rohs df6- 1p-3.96c 546-0001-1 1 4.92 _____ df6- 2p-3.96c 546-0002-4 2 8.88 3.96 df6- 3p-3.96c 546-0003-7 3 12.84 7.92 df6- 4p-3.96c 546-0004-0 4 16.80 11.88 df6- 5p-3.96c 546-0005-2 5 20.76 15.84 yes df6- 6p-3.96c 546-0006-5 6 24.72 19.80 df6- 7p-3.96c 546-0007-8 7 28.68 23.76 df6- 8p-3.96c 546-0008-0 8 32.64 27.72 df6-10p-3.96c 546-0011-5 10 40.56 35.64 typeitem part number cl no. applicable contact applicator ap105-df6-1822p 901-4505-9 df6 -1822pcf ( 05 ) ap105-df6a-1822p 901-4520-2 df6a-1822pcf ( 05 ) press unit cm-105 901-0005-4 ________ manual crimping df6 -ta1822hc 550-0174-9 df6 -1822pc ( 05 ) tool df6a-ta1822hc 550-0222-0 df6a-1822pc ( 05 ) extraction tool df-c-po(a) 550-0170-8 df6/df6a-1822pc ( f )( 05 ) contact view for insertion note: a packaging quantity is delivered by the bag unit (100 pcs.). note 1. the applicable cable conductor is a tin plated and annealed copper wire. note 2. if other cables are used instead of the applicable cable, contact the hirose sales department. note: if any trouble has been caused due to other tools, which are not designated by hirose, hirose never guarantee any product s. slip length df6-1822pc (f): 2.1mm to 2.6mm df6a-1822pc (f): 2.3mm to 2.8mm applicable through-hole: 1.8 +0.15 0 b applicable crimping tools applicable cable part number cl no. packaging type quantity a b c ul style jacket dia. awg size contact construct df6 -1822pcf(05) 546-0009-3-05 reel 5,000 1007 1.5 to 2.2mm awg 18 34 cores/0.18mm 10.2 1.5 1.2 df6 -1822pc(05) 546-0010-2-05 bag 100 awg 20 21 cores/0.18mm df6a-1822pcf(05) 546-0013-0-05 reel 3,000 1015 2.2 to 2.9mm awg 22 17 cores/0.16mm 10.5 1.7 1.4 df6a-1822pc(05) 546-0014-3-05 bag 100 rohs yes the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative. nov.1.2016 copyright 2016 hirose electric co., ltd. all rights reserved. powered by tcpdf (www.tcpdf.org) b132 df6 series 3.96mm pitch connector directly mounted on board b precautions 1.recommended soldering condition 2.cleaning condition 3.connecting condition 4.precations flow: 250? for 3 seconds manual soldering: 290? for 2 seconds after soldering, if a load is given to the cable where connector and cable contain heat, the jacket holding member will be loosened. after soldering, the operation should be performed, after connector returns to room temperature. refer to the "nylon connector use hand book". don't use solvent to degrade the cable jacket like trichloroethane. in addition, avoid heat cleaning with solvent. refer to the "nylon connector use hand book". slight discoloration on the insulating materials will not affect form, fit or function of the connectors. refer to "nylon connector use handbook" the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
jan.1.2017 copyright 2017 hirose electric co., ltd. all rights reserved. powered by tcpdf (www.tcpdf.org) nov.1.2016 copyright 2016 hirose electric co., ltd. all rights reserved. b129 3.96mm pitch connector directly mounted on board df6 series features 1. service efficiency up conventional thick cables are directly mounted on the board piece by piece, but connecterization has achieved soldering services in a batch. this product enhances soldering service efficiency. 2. miniaturization this product achieves miniaturization for thick cables. mounting height on board : 7.5mm width : 5.0mm 3. board prefixed mechanism since the connector is softly press-fitted to the board for insertion, it can be prefixed to the board. applications secondary power supply units for various equipment prefixed mechanism height: 7.5mm width: 4.6mm the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative. nov.1.2016 copyright 2016 hirose electric co., ltd. all rights reserved. b130 df6 series 3.96mm pitch connector directly mounted on board product specifications rating current rating (note 1) voltage rating awg 18 : 5a cable size awg 20 : 4a awg 22 : 3a 300v ac operating temperature range operating moisture range storage temperature range storage humidity range -35 to + 85 ? (note 1) 40 to 80% -10 to + 60 ? (note 2) 40 to 70% (note 2) note 1: the rated current will be changed according to cable sizes for use. note 2: includes temperature rise caused by current flow. note 3: the term "storage" refers to products stored for long period of time prior to mounting and use. operating temperature r ange and humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation. note 4: information contained in this catalog represents general requirements for this series.contact us for the drawings and s pecifications for a specific part number shown. item specification condition 1.insulation resistance 1000m ohms min. 500v dc 2.withstanding voltage no flashover or insulation breakdown. 1500v ac/1 minute 3.contact resistance 15m ohms max. 100ma 4.vibration no damage, cracks, or parts looseness. frequency: 10 to 55 hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions. 5. humidity (steady state) no damage, cracks, or parts looseness. 96 hours at temperature of 40? and humidity of 90% to 95% 6.temperature cycle no damage, cracks, or parts looseness. (-55 ? : 30 minutes ? 15 to 35 ? : 10 minutes ? 85 ? : 30 minutes ? 5 to 35 ? : 10 minutes ) 5 cycles 7. resistance to soldering heat no deformation of components affecting performance. flow: 250? for 10 seconds manual soldering: 300? for 3 seconds material product part material finish remarks crimping plug insulator polyamide white ul94v-0 crimping contact for plug brass copper alley tin plated ________ ordering information df6 - * p - 3.96 c qe wrt r contact pitch: 3.96mm t c: crimping plug q series name : df 6 w number of contacts: 1 ~ 8, 10 e connector type p: plug crimping plug df6a - 1822 pcf qwe e packaging type pcf: plug contact, reel packaging sc: plug contact, bag packaging q applicable cable type none : jacket dia. 1.5mm to 2.2mm ul 1007 a : jacket dia. 2.2mm to 2.9mm ul 1015 w applicable cable size 1822 : awg#18~#22 crimping contact the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative. nov.1.2016 copyright 2016 hirose electric co., ltd. all rights reserved. b131 df6 series 3.96mm pitch connector directly mounted on board precrimping plug photo: contact inserted crimping contact part number cl no. number of contacts a b rohs df6- 1p-3.96c 546-0001-1 1 4.92 _____ df6- 2p-3.96c 546-0002-4 2 8.88 3.96 df6- 3p-3.96c 546-0003-7 3 12.84 7.92 df6- 4p-3.96c 546-0004-0 4 16.80 11.88 df6- 5p-3.96c 546-0005-2 5 20.76 15.84 yes df6- 6p-3.96c 546-0006-5 6 24.72 19.80 df6- 7p-3.96c 546-0007-8 7 28.68 23.76 df6- 8p-3.96c 546-0008-0 8 32.64 27.72 df6-10p-3.96c 546-0011-5 10 40.56 35.64 typeitem part number cl no. applicable contact applicator ap105-df6-1822p 901-4505-9 df6 -1822pcf ( 05 ) ap105-df6a-1822p 901-4520-2 df6a-1822pcf ( 05 ) press unit cm-105 901-0005-4 ________ manual crimping df6 -ta1822hc 550-0174-9 df6 -1822pc ( 05 ) tool df6a-ta1822hc 550-0222-0 df6a-1822pc ( 05 ) extraction tool df-c-po(a) 550-0170-8 df6/df6a-1822pc ( f )( 05 ) contact view for insertion note: a packaging quantity is delivered by the bag unit (100 pcs.). note 1. the applicable cable conductor is a tin plated and annealed copper wire. note 2. if other cables are used instead of the applicable cable, contact the hirose sales department. note: if any trouble has been caused due to other tools, which are not designated by hirose, hirose never guarantee any product s. slip length df6-1822pc (f): 2.1mm to 2.6mm df6a-1822pc (f): 2.3mm to 2.8mm applicable through-hole: 1.8 +0.15 0 b applicable crimping tools applicable cable part number cl no. packaging type quantity a b c ul style jacket dia. awg size contact construct df6 -1822pcf(05) 546-0009-3-05 reel 5,000 1007 1.5 to 2.2mm awg 18 34 cores/0.18mm 10.2 1.5 1.2 df6 -1822pc(05) 546-0010-2-05 bag 100 awg 20 21 cores/0.18mm df6a-1822pcf(05) 546-0013-0-05 reel 3,000 1015 2.2 to 2.9mm awg 22 17 cores/0.16mm 10.5 1.7 1.4 df6a-1822pc(05) 546-0014-3-05 bag 100 rohs yes the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative. nov.1.2016 copyright 2016 hirose electric co., ltd. all rights reserved. powered by tcpdf (www.tcpdf.org) b132 df6 series 3.96mm pitch connector directly mounted on board b precautions 1.recommended soldering condition 2.cleaning condition 3.connecting condition 4.precations flow: 250? for 3 seconds manual soldering: 290? for 2 seconds after soldering, if a load is given to the cable where connector and cable contain heat, the jacket holding member will be loosened. after soldering, the operation should be performed, after connector returns to room temperature. refer to the "nylon connector use hand book". don't use solvent to degrade the cable jacket like trichloroethane. in addition, avoid heat cleaning with solvent. refer to the "nylon connector use hand book". slight discoloration on the insulating materials will not affect form, fit or function of the connectors. refer to "nylon connector use handbook" the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
|
