POS-1001 ???? ??: 2 5-12v dc gigabit poe splitter the levelone POS-1001 gigabit poe splitter splits a networked poe signal into separated power and gigabit data sources. this device allows administrators to run gigabit speed poe cables over long distances and then split the poe signal into separated data and power sources in order to network non-poe devices. active splitters are aslo available in the following output voltages (5v or 9v or 12v). save installation and equipment cost when installing 802.11n access points, (pan/tilt/zoom) ip cameras and more in remote locations. no need to install network devices near a power outlet. this compact device safeguards valuable network equipment with short circuit protection and quickly creates an integrated poe and non poe network at gigabit speeds. key features - network devices at gigabit speeds all within a compact device - automatically detects poe terminals and supplies inline power - easily install non-poe devices where a power outlet is not available - reduce installation and network equipment costs - safeguards network device with short circuit protection - adjustable output dip switch for 5v, 9v, and 12v adjustable output - converts non-poe devices with power over ethernet support - auto-sensing power drawn from 802.3af power source equipment(pse) devices - supplies power up to 12.9 watts - provides interchangeable tips www.level1.com page 1 of 3
?? ?? poi-2001 gigabit poe injector poi-3000 gigabit poe+ injector ???? system specifications standards & protocols: ieee 802.3 10-base-t, ethernet ieee 802.3u 100-base-tx, fast ethernet ieee 802.3ab 1000base-t, gigabit ethernet ieee 802.3af power over ethernet (poe) button: adjstable dip switch indicator: dc power (green) power: output power voltage: 5v (2a), 9v (1.1a), 12v (0.85a) dc pin:5.5*2.5*12 mm (white) / 5.5*2.1*12 mm (blue) / 4.8*1.7*12 mm (yellow/3.5*1.3*12(red)mm, (l-300mm) input power requirement: pin assignment and polarity: 1/2(+), 3/6 (-) or 4/5(+), 7/8(-) performance data transfer rate: 10/100/1000 mbps environment temperature (c): operating: 0c ~ 45c humidity (non-condensing): operating: 5% ~ 95% physical specifications dimensions (w x d x h mm): 55 x 80 x 31 mm weight (g): 76 g others www.level1.com page 2 of 3
approval and compliance: ce, fcc, en 60950:2006, rohs ?? order information POS-1001 package contents POS-1001 quick installation guide no liability or responsibility for any errors or omissions in the content. specifications are subject to change without notice. all mentioned brand names are registered trademarks and property of their owners. copyright ? digital data communications gmbh, germany. all rights reserved. powered by tcpdf (www.tcpdf.org) www.level1.com page 3 of 3
|
