design and specifications are each subject to change without notice. ask factory for the current technical specifications befo re purchase and/or use. should a safety concern arise regarding this product, please be sure to contact us immediately. electric double layer capacitors (gold capacitor) p 0 f d 0 p 1 f p 2 p 5.40.8 f d h 1 13.4 max. h 0 w w 1 w 2 w 0 h C + C + h 1 10.5 max. endurance : +70 c 1000 h category temperature range : C40 c to +70 c automatic insertion available rohs compliant memory back-up for video and audio equipment, cameras, telephones, printers, data terminals, rice cookers and intelligent remote controls. stacked coin type series : se low temperature assured product +0.8 C0.2 dimensions nominal tolerance 0 d 0.55 0.05 p 0 12.7 0.2 f 5.0 w 18.0 0.5 w 0 5.5 < C w 1 9.0 0.5 w 2 0 to 3.0 C h 0 16.4 0.5 0 d 0 4.0 0.2 p 12.7 1.0 p 1 3.85 0.50 p 2 6.35 1.00 h, h 1 0 1.0 h 1 30.3 > C category temp. range C40 c to +70 c maximum operating voltage 5.5 v.dc nominal cap.range 0.22 f characteristics at low temperature capacitance change 30 % of initial measured value at +20 c (at C40 c) internal resistance < 7 times of initial measured value at +20 c (at C40 c) endurance after 1000 hours application of 5.5 v.dc at +70 c, the capacitor shall meet the following limits. capacitance change 30 % of initial measured value internal resistance < 4 times of initial speci? ed value shelf life after 1000 hours storage at +70 c without load, the capacitor shall meet the speci? ed limits for endurance. ? 1 the recommended discharge current is a reference value. please design your equipment (circuit) in consideration of ir drop. ? when ordering please observe the minimum packaging quantity. ? when the surface mount component goes through uv or a heat oven to af? x the adhesive glue, the capacitors surface temperature should not exceed 100 c for more than 60 seconds (maximum tem per a ture should not exceed 105 c) ? do not use re? ow soldering. please refer to the page of application guidelines. characteristics list (unit : mm) features recommended applications specifi cations dimensions in mm(not to scale) category temp. range (c) maximum operating voltage (v.dc) capacitance (f) capacitance tolerance (f) internal resistance (initial speci? ed value) ( ) at 1 khz recommended ? 1 discharge current (a) parts number mass (reference value) (g) min. packaging q'ty (pcs) C40 to +70 5.5 0.22 0.176 to 0.396 < 75 300 or less EECSE0H224N 1.0 1000 aug. 2016 02
|
