features surge overload rating -260 amperes peak ideal for printed circuit board reliable low cost construction utilizing molded plastic technique plastic material has u/l flammability classification 94v-0 mounting postition:any maximum ratings and electrical characteristics maximum recurrent peak reverse voltage v rrm v maximum rms voltage v rms v maximum dc blocking voltage v dc v maximum average forward (with heatsink note1) rectified current @ t c =100 (without heatsink) peak forward surage current 8.3ms single half sine-wave super imposed on rated load (jedec method) i 2 t rating for fusing (t<8.3ms) i 2 t a 2 s typical junction capacitance per element (note2) c j pf maximum forward voltage at 10.0a dc v f v maximum dc reverse current @ t j =25 at rated dc blocking voltage @ t j =125 typical thermal resistance r jc /w operating temperature range t j storage temperature range t stg notes: 1.device mounted on 100mm*100mm*1.6mm cu plate heatsink. 2.measured at 1.0mhz and applied reverse voltage of 4.0v dc. 3.the typical data above is for reference only( ?). i r 10.0 -55 to +150 rev. 3, 16-mar-2017 a 500 2.2 -55 to +150 a 280 70 0.92 i fsm 260 i (av) 20.0 characteristics dimensions in inches and (milimeters) rating at 25 ambient temperature unless otherwise specified. single phase, half wave ,60hz, resistive or inductive load. for capacitive load, derate current by 20% symbol unit gbu2006l gbu2006l glass passivated reverse voltage - 600 volts forward current - 20 amperes bridge rectifiers 600 a 3.6 600 420 gbu .161(4.1) .134(3.4) .860(21.8) .874(22.2) - + .018(.46) .022(.56) .106(2.7) .091(2.3) .139(3.53) .133(3.37) .047(1.2) .035(0.9) .057(1.45) .073(1.85) .680(17.27) .720(18.29) .752(19.1) .720(18.3) .430(10.9) .437(11.1) .392(9.80) .401(10.2) .190 .210 (4.8) (5.3) (5.3) (4.8) .210 .190 .190 .210 (4.8) (5.3) .080(2.03) .065(1.65) .085(2.16) .100(2.54) chamfer .126(3.2)*45 .232(5.9) .213(5.4)
rating and charactertic curves gbu2006l the cruve graph is for reference only, can't be the basis for judgment( ?)! rev. 3, 16-mar-2017 instantaneous reverse current, microamperes fig.4-typical reverse characteristics percent of rated peak reverse voltage t j =25c 10 1.0 0.1 0.01 0 40 60 80 100 120 140 20 fig.1-maximum forward surge current number of cycles at 60hz peak forward surge current amperes 400 350 300 250 200 1500 100 50 0 10 100 1 casw temperature averagr forward output current amperes fig.2- derating curve output rectified current 0 10 40 30 50 100 150 20 fig.5-typical junction capacitance reverse voltage,(volts) capacitance,(pf) 10.0 100 1.0 1.0 10 100 t j =25c,f=1mhz instantaneous forward current, amperes 0.4 0.6 0.8 1.0 1.2 1.4 0.01 0.1 1.0 10.0 20.0 0 0.2 fig.3-typical forward characteristics instantaneous forward voltage. volts t j = 25c pulse width 300us
legal disclaimer notice all specifications and data are subject to be changed without notice to improve reliability function or design or other reasons. hy makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the co- tinuing production of any product. to the maximum extent permitted by applicable law, hy disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,consequential or incidental d- amages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merch- antability. statements regarding the suitability of products for certain types of applications are based on hy?s knowledge of typical require- ments that are often placed on hy products in generic applications. such statements are not binding statements about the suitabi- lity of products for a particular application. it is the customer?s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application.parameters provided in datasheets and specific- ations may vary in different applications and performance may vary over time. all operating parameters, including typical paramet- ers, must be validated for each customer application by the customer?s technical experts. product specifications do not expand or otherwise modify hy?s terms and conditions of purchase, including but not limited to the warranty expressed therein. except as expressly indicated in writing, hy products are not designed for use in medical, life-saving, or life-sustaining applicati- ons or for any other applications in which the failure of the hy product could result in personal injury or death. customers using or selling hy products not expressly indicated for use in such applications do so at their own risk.please contact authorized hy pers- onnel to obtain written terms and conditions regarding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of hy. product names and markings noted herein may be trademarks of their respective owners. ?????????? hy ???????????hy (i) ? ??????(ii) ???????(iii) ??? ???????? ????? hy ? hy ???????????? ???????????????? ????? ????????????? ??? hy ???? hy ???? ?hy ????? hy ??????? ?????? hy ????????hy ?? ? ? hy ??????????????????? ??? rev. 2, 16-mar-2017 disclaimer
|
