View HMC6505LC5_8928437.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

analog devices welcomes hittite microwave corporation no content on the attached documen t has changed www.analog.com www.hittite.com
this page intentionally left blank
mixers - i/q mixers, irm s & r eceivers - sm t 1 HMC6505LC5 v02.0413 gaas mmic i/q upconverter 5.5 - 8.6 ghz general description features typical applications the h mc 6505l c 5 is a compact gaas mmic i / q upconverter in a leadless r oh s compliant sm t package. this device provides a small signal con- version gain of 15 db with 22 dbc of sideband rejection. the h mc 6505l c 5 utilizes a r f amplifer preceded by an i / q mixer where the lo is driven by a driver amplifer. i f1 and i f2 mixer inputs are provided and an external 90 hybrid is needed to select the required sideband. the i / q mixer topology reduces the need for fltering of the unwanted sideband. the h mc 6505l c 5 is a much smaller alternative to hybrid style single sideband upconverter assemblies and it eliminates the need for wire bonding by allowing the use of surface mount man- ufacturing techniques. electrical specifcations, t a = +25c, if = 350 mhz, lo = +4 dbm, vdd2, 3 = +5v, idd2 + idd3 = 120 ma, vdd1 = +5v, idd1 = 125 ma [1][2][6] parameter m in. typ. m ax. m in. typ. m ax. units frequency r ange, r f 5.5 - 7 7 - 8.6 ghz frequency r ange, lo 5 - 10 6.5 - 11.6 ghz frequency r ange, i f d c - 3 d c - 3 ghz c onversion gain [5] 12 15 11 14 db s ideband r ejection 18 22 18 22 dbc 1 db c ompression (output) 21 22 dbm i p3 (output) 31 35 31 35 dbm lo / r f r ejection [3] [4] 7 10 11 14 dbc r f r eturn loss 16 17 db lo r eturn loss 8 9 db i f1 r eturn loss 10 10 db i f2 r eturn loss 8 8 db s upply c urrent i dd1 125 125 ma s upply c urrent i dd2 + i dd3 [2] 120 120 ma [1] unless otherwise noted all measurements performed with high side lo, i f = 350 m hz and external i f 90 hybrid. [2] adjust v gg between -2 to 0 v to achieve i dd2 + i dd3 = 120 ma typical. [3] the lo / r f r ejection is defned as the lo signal level at the r f output port relative to the desired r f output signal level. [4] the lo / r f r ejection data is with i f = -6 dbm. [5] data based on subtracting out board loss and loss of hybrid. [6] +3 v can also be used for v dd1. functional diagram the h mc 6505l c 5 is ideal for: ? point-to-point and point-to-multi-point radio ? military radar, ew & elint ? satellite communications ? sensors high c onversion gain: 15 db s ideband r ejection: 22 dbc lo / r f r ejection: 14 dbc high output i p3: +35 dbm 32 lead 5x5 mm sm t c eramic package: 25 mm2 for price, delivery and to place orders: hittite microwave corporation, 2 elizabeth drive, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com application support: phone: 978-250-3343 or apps@hittite.com
mixers - i/q mixers, irm s & r eceivers - sm t 2 HMC6505LC5 v02.0413 gaas mmic i/q upconverter 5.5 - 8.6 ghz lo return loss vs. temperature conversion gain, lsb vs. lo drive [8] rf return loss vs. temperature conversion gain, lsb vs. temperature [8] data taken as ssb upconverter with external if 90 hybrid, if = 350 mhz 0 4 8 12 16 20 5.5 6 6.5 7 7.5 8 8.5 9 2 dbm 3 dbm 4 dbm 5 dbm 6 dbm conversion gain (db) rf frequency (ghz) -30 -25 -20 -15 -10 -5 0 56789 +25 c +85 c -40 c return loss (db) rf frequency (ghz) -25 -20 -15 -10 -5 0 56789 +25 c +85 c -40 c return loss (db) frequency (ghz) parameter m in. typ. m ax. m in. typ. m ax. units frequency r ange, r f 5.5 - 7 7 - 8.6 ghz frequency r ange, lo 5 - 10 6.5 - 11.6 ghz frequency r ange, i f d c - 3 d c - 3 ghz dynamic r ange 18 20 18 20 db v c ontrol -4 0 -4 0 v lo power -2 3 10 -2 3 10 dbm gain flatness (150 m hz s egments) 0.5 0.5 db noise figure (min attenuation) [7] 11. 5 12 db [1] unless otherwise noted all measurements performed with high side lo, i f = 350 m hz and external i f 90 hybrid. [7] noise figure measurement performed with high side lo, if = 2500 mhz and external if 90 hybrid. electrical specifcations, (continued) [1] [8] board loss and hybrid loss not subtracted out. 0 4 8 12 16 20 5.5 6 6.5 7 7.5 8 8.5 9 +25 c +85 c -40 c conversion gain (db) rf frequency (ghz) for price, delivery and to place orders: hittite microwave corporation, 2 elizabeth drive, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com application support: phone: 978-250-3343 or apps@hittite.com
mixers - i/q mixers, irm s & r eceivers - sm t 3 HMC6505LC5 v02.0413 gaas mmic i/q upconverter 5.5 - 8.6 ghz input p1db, lsb vs. temperature output p1db, lsb vs. temperature input ip3, lsb vs. temperature output ip3, lsb vs. temperature data taken as ssb upconverter with external if 90 hybrid, if = 350 mhz 5 10 15 20 25 30 5.5 6 6.5 7 7.5 8 8.5 9 +25 c +85 c -40 c ip3 (dbm) rf frequency (ghz) 20 25 30 35 40 45 5.5 6 6.5 7 7.5 8 8.5 9 +25 c +85 c -40 c ip3 (dbm) rf frequency (ghz) 0 2 4 6 8 10 12 14 16 5.5 6 6.5 7 7.5 8 8.5 9 +25 c +85 c -40 c p1db (dbm) rf frequency (ghz) 14 16 18 20 22 24 26 5.5 6 6.5 7 7.5 8 8.5 9 +25 c +85 c -40 c p1db (dbm) rf frequency (ghz) -30 -25 -20 -15 -10 -5 0 01234 if1 if2 return loss (db) frequency (ghz) if return loss [9] 0 5 10 15 20 25 30 35 40 5.5 6 6.5 7 7.5 8 8.5 9 +25 c +85 c -40 c side band rejection (dbc) rf frequency (ghz) sideband rejection vs. temperature [9] data taken without external i f 90 hybrid for price, delivery and to place orders: hittite microwave corporation, 2 elizabeth drive, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com application support: phone: 978-250-3343 or apps@hittite.com
mixers - i/q mixers, irm s & r eceivers - sm t 4 HMC6505LC5 v02.0413 gaas mmic i/q upconverter 5.5 - 8.6 ghz conversion gain, lsb vs. control voltage [8] input ip3, lsb vs. control voltage lo/rf rejection, lsb isolation data taken as ssb upconverter with external if 90 hybrid, if = 350 mhz -15 -10 -5 0 5 10 15 20 -4 -3.5 -3 -2.5 -2 -1.5 -1 -0.5 0 5.5 ghz 6.5 ghz 7.5 ghz 8.5 ghz conversion gain (db) vctrl (v) 15 18 21 24 27 30 -4 -3.5 -3 -2.5 -2 -1.5 -1 -0.5 0 5.5 ghz 6.5 ghz 7.5 ghz 8.5 ghz ip3 (dbm) vctrl (v) 0 5 10 15 20 25 5.5 6 6.5 7 7.5 8 8.5 9 +25 c +85 c -40 c lo/rf rejection (dbc) frequency (ghz) -20 -15 -10 -5 0 56789 lo/if1 lo/if2 isolation (db) frequency (ghz) [8] board loss and hybrid loss not subtracted out. for price, delivery and to place orders: hittite microwave corporation, 2 elizabeth drive, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com application support: phone: 978-250-3343 or apps@hittite.com
mixers - i/q mixers, irm s & r eceivers - sm t 5 HMC6505LC5 v02.0413 gaas mmic i/q upconverter 5.5 - 8.6 ghz input p1db, lsb vs. temperature conversion gain, lsb vs. lo drive [8] sideband rejection vs. temperature output p1db, lsb vs. temperature input ip3, lsb vs. temperature conversion gain, lsb vs. temperature [8] data taken as ssb upconverter with external if 90 hybrid, if = 2500 mhz 0 4 8 12 16 20 5.5 6 6.5 7 7.5 8 8.5 9 +25 c +85 c -40 c conversion gain (db) rf frequency (ghz) 0 4 8 12 16 20 5.5 6 6.5 7 7.5 8 8.5 9 2 dbm 3 dbm 4 dbm 5 dbm 6 dbm conversion gain (db) rf frequency (ghz) 10 15 20 25 30 35 40 5.5 6 6.5 7 7.5 8 8.5 9 +25 c +85 c -40 c side band rejection (dbc) rf frequency (ghz) 10 15 20 25 30 35 5.5 6 6.5 7 7.5 8 8.5 9 +25 c +85 c -40 c ip3 (dbm) rf frequency (ghz) 0 2 4 6 8 10 12 14 16 5.5 6 6.5 7 7.5 8 8.5 9 +25 c +85 c -40 c p1db (dbm) rf frequency (ghz) 14 16 18 20 22 24 26 5.5 6 6.5 7 7.5 8 8.5 9 +25 c +85 c -40 c p1db (dbm) rf frequency (ghz) [8] board loss and hybrid loss not subtracted out. for price, delivery and to place orders: hittite microwave corporation, 2 elizabeth drive, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com application support: phone: 978-250-3343 or apps@hittite.com
mixers - i/q mixers, irm s & r eceivers - sm t 6 HMC6505LC5 v02.0413 gaas mmic i/q upconverter 5.5 - 8.6 ghz conversion gain, lsb vs. control voltage [8] input ip3, lsb vs. control voltage output ip3, lsb vs. temperature data taken as ssb upconverter with external if 90 hybrid, if = 2500 mhz 20 25 30 35 40 45 5.5 6 6.5 7 7.5 8 8.5 9 +25 c +85 c -40 c ip3 (dbm) rf frequency (ghz) -15 -10 -5 0 5 10 15 -4 -3.5 -3 -2.5 -2 -1.5 -1 -0.5 0 5.5 ghz 6.5 ghz 7.5 ghz 8.5 ghz conversion gain (db) vctrl (v) 10 14 18 22 26 30 -4 -3.5 -3 -2.5 -2 -1.5 -1 -0.5 0 5.5 ghz 6.5 ghz 7.5 ghz 8.5 ghz ip3 (dbm) vctrl (v) noise figure, lsb vs. temperature minimum attenuation 0 2 4 6 8 10 12 14 16 5.5 6 6.5 7 7.5 8 8.5 9 +25 c +85 c -40 c noise figure (db) frequency (ghz) [8] board loss and hybrid loss not subtracted out. for price, delivery and to place orders: hittite microwave corporation, 2 elizabeth drive, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com application support: phone: 978-250-3343 or apps@hittite.com
mixers - i/q mixers, irm s & r eceivers - sm t 7 HMC6505LC5 v02.0413 gaas mmic i/q upconverter 5.5 - 8.6 ghz conversion gain, usb vs. temperature [8] data taken as ssb upconverter with external if 90 hybrid, if = 350 mhz conversion gain, usb vs. lo drive [8] sideband rejection vs. temperature input p1db, usb vs. temperature output p1db, usb vs. temperature input ip3, usb vs. temperature 0 4 8 12 16 20 5.5 6 6.5 7 7.5 8 8.5 9 +25 c +85 c -40 c conversion gain (db) rf frequency (ghz) 0 4 8 12 16 20 5.5 6 6.5 7 7.5 8 8.5 9 2 dbm 3 dbm 4 dbm 5 dbm 6 dbm conversion gain (db) rf frequency (ghz) 0 5 10 15 20 25 30 5.5 6 6.5 7 7.5 8 8.5 9 +25 c +85 c -40 c side band rejection (dbc) rf frequency (ghz) 10 15 20 25 30 35 5.5 6 6.5 7 7.5 8 8.5 9 +25 c +85 c -40 c ip3 (dbm) rf frequency (ghz) 0 2 4 6 8 10 12 14 16 5.5 6 6.5 7 7.5 8 8.5 9 +25 c +85 c -40 c p1db (dbm) rf frequency (ghz) 14 16 18 20 22 24 26 5.5 6 6.5 7 7.5 8 8.5 9 +25 c +85 c -40 c p1db (dbm) rf frequency (ghz) [8] board loss and hybrid loss not subtracted out. for price, delivery and to place orders: hittite microwave corporation, 2 elizabeth drive, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com application support: phone: 978-250-3343 or apps@hittite.com
mixers - i/q mixers, irm s & r eceivers - sm t 8 HMC6505LC5 v02.0413 gaas mmic i/q upconverter 5.5 - 8.6 ghz data taken as ssb upconverter with external if 90 hybrid, if = 350 mhz output ip3, usb vs. temperature conversion gain, usb vs. control voltage [8] input ip3, usb vs. control voltage 20 25 30 35 40 45 5.5 6 6.5 7 7.5 8 8.5 9 +25 c +85 c -40 c ip3 (dbm) rf frequency (ghz) -15 -10 -5 0 5 10 15 -4 -3.5 -3 -2.5 -2 -1.5 -1 -0.5 0 5.5 ghz 6.5 ghz 7.5 ghz 8.5 ghz conversion gain (db) vctrl (v) 10 15 20 25 30 35 40 -4 -3.5 -3 -2.5 -2 -1.5 -1 -0.5 0 5.5 ghz 6.5 ghz 7.5 ghz 8.5 ghz ip3 (dbm) vctrl (v) lo/rf rejection, usb 0 5 10 15 20 25 5.5 6 6.5 7 7.5 8 8.5 9 +25 c +85 c -40 c lo/rf rejection (dbc) frequency (ghz) [8] board loss and hybrid loss not subtracted out. for price, delivery and to place orders: hittite microwave corporation, 2 elizabeth drive, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com application support: phone: 978-250-3343 or apps@hittite.com
mixers - i/q mixers, irm s & r eceivers - sm t 9 HMC6505LC5 v02.0413 gaas mmic i/q upconverter 5.5 - 8.6 ghz data taken as ssb upconverter with external if 90 hybrid, if = 2500 mhz conversion gain, usb vs. temperature [8] conversion gain, usb vs. lo drive [8] sideband rejection vs. temperature input p1db, usb vs. temperature output p1db, usb vs. temperature input ip3, usb vs. temperature 0 4 8 12 16 20 5.5 6 6.5 7 7.5 8 8.5 9 +25 c +85 c -40 c conversion gain (db) rf frequency (ghz) 0 4 8 12 16 20 5.5 6 6.5 7 7.5 8 8.5 9 2 dbm 3 dbm 4 dbm 5 dbm 6 dbm conversion gain (db) rf frequency (ghz) 30 40 50 60 70 80 5.5 6 6.5 7 7.5 8 8.5 9 +25 c +85 c -40 c side band rejection (dbc) rf frequency (ghz) 0 5 10 15 20 25 30 35 5.5 6 6.5 7 7.5 8 8.5 9 +25 c +85 c -40 c ip3 (dbm) rf frequency (ghz) 0 2 4 6 8 10 12 14 16 5.5 6 6.5 7 7.5 8 8.5 9 +25 c +85 c -40 c p1db (dbm) rf frequency (ghz) 14 16 18 20 22 24 26 5.5 6 6.5 7 7.5 8 8.5 9 +25 c +85 c -40 c p1db (dbm) rf frequency (ghz) [8] board loss and hybrid loss not subtracted out. for price, delivery and to place orders: hittite microwave corporation, 2 elizabeth drive, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com application support: phone: 978-250-3343 or apps@hittite.com
mixers - i/q mixers, irm s & r eceivers - sm t 10 HMC6505LC5 v02.0413 gaas mmic i/q upconverter 5.5 - 8.6 ghz data taken as ssb upconverter with external if 90 hybrid, if = 2500 mhz output ip3, usb vs. temperature conversion gain, usb vs. control voltage [8] input ip3, usb vs. control voltage -40 -30 -20 -10 0 10 20 -4 -3.5 -3 -2.5 -2 -1.5 -1 -0.5 0 5.5 ghz 6.5 ghz 7.5 ghz 8.5 ghz conversion gain (db) vctrl (v) 0 5 10 15 20 25 30 -4 -3.5 -3 -2.5 -2 -1.5 -1 -0.5 0 5.5 ghz 6.5 ghz 7.5 ghz 8.5 ghz ip3 (dbm) vctrl (v) 0 4 8 12 16 20 5.5 6 6.5 7 7.5 8 8.5 9 +25 c +85 c -40 c conversion gain (db) rf frequency (ghz) [8] board loss and hybrid loss not subtracted out. for price, delivery and to place orders: hittite microwave corporation, 2 elizabeth drive, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com application support: phone: 978-250-3343 or apps@hittite.com
mixers - i/q mixers, irm s & r eceivers - sm t 11 HMC6505LC5 v02.0413 gaas mmic i/q upconverter 5.5 - 8.6 ghz mxn spurious outputs [1][2] mxn spurious outputs [1][3] nlo m if 0 1 2 3 4 0 x 17. 3 35.1 57. 5 62.6 +1 80.6 0 39.6 66.4 93.3 +2 49.9 64.3 40.6 72.3 91.5 +3 96.7 57. 8 87.4 78.5 89.8 +4 88.5 100.8 89.3 94.2 91.7 i f = 0.35 ghz @ -6 dbm lo = 8.5 ghz @ 0 dbm nlo m if 0 1 2 3 4 0 x 17. 3 35.1 56.5 62.7 -1 80.6 0 42.8 62.9 93 -2 49.9 53.3 39.3 72.9 90.3 -3 96.9 56 90 75 93 -4 88.2 101.9 89.4 9 6.1 91.1 i f = 0.35 ghz @ -6 dbm lo = 8.5 ghz @ 0 dbm [1] data taken without external i f 90 hybrid [2] all values in dbc below r f power level (lo + i f) u s b [3] all values in dbc below r f power level (lo - i f) l s b nlo m if 0 1 2 3 4 0 x 15.1 36.4 50.4 61.5 +1 66.7 0 42.9 56.5 83.2 +2 49.2 47.1 39.9 76.5 84.6 +3 95.2 58.9 79.4 76 94.2 +4 86.9 102.5 86.5 96.8 9 6.1 i f = 0.35 ghz @ -6 dbm lo = 7.7 ghz @ 0 dbm nlo m if 0 1 2 3 4 0 x 15 36.4 50.6 60.1 -1 66.6 0 48.2 51.4 82.8 -2 49.2 47 38.1 79.7 79.9 -3 95.9 56.7 86.7 75.4 93.1 -4 86.9 94 88.3 97.4 93.8 i f = 0.35 ghz @ -6 dbm lo = 7.7 ghz @ 0 dbm nlo m if 0 1 2 3 4 0 x 11.6 23.6 38.4 60.1 +1 59.8 0 42.9 45.4 70.9 +2 48.5 50.4 39.4 79.9 76.7 +3 86.9 61 87. 5 76.2 94.3 +4 85.2 82.4 86.2 97 95.7 i f = 0.35 ghz @ -6 dbm lo = 7.0 ghz @ 0 dbm nlo m if 0 1 2 3 4 0 x 11.6 23.5 38.3 58.7 -1 59.7 0 46.7 36.9 73.4 -2 48.6 53 37.7 75.2 69.1 -3 87 58 75 70.9 91.1 -4 84.8 87 83.6 99.5 93.1 i f = 0.35 ghz @ -6 dbm lo = 7.0 ghz @ 0 dbm for price, delivery and to place orders: hittite microwave corporation, 2 elizabeth drive, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com application support: phone: 978-250-3343 or apps@hittite.com
mixers - i/q mixers, irm s & r eceivers - sm t 12 HMC6505LC5 v02.0413 gaas mmic i/q upconverter 5.5 - 8.6 ghz outline drawing notes: 1. package body material: alumina 2. lead and ground paddle plating: 30 - 80 microinches gold over 50 microinches minimum nickle 3. dimensions are in inches [millimeters] 4. lead spacing tolerance is non-cumulative 5. package warp shall not exceed 0.05mm datum 6. all ground leads and ground paddle must be soldered to pcb rf ground absolute maximum ratings electrostatic sensitive device observe handling precautions i f i nput +20 dbm lo i nput +10 dbm v ctrl -5 v to +0.3 v v dd1 +5.5 v v dd2 and v dd3 +5.5 v v gg -3 v to 0 v c hannel temperature 175 c c ontinuous pdiss (t = 85 c) (derate 18.3 mw/ c above 85 c) 1.65 w thermal r esistance (channel to ground paddle) 54.6 c/w s torage temperature -65 to +150 c operating temperature -40 to +85 c es d s ensitivity (hb m ) c lass1a part number package body m aterial lead finish ms l r ating package m arking [2] h mc 6505l c5 alumina, white gold over nickel ms l3 [1] 6505 xxxx [1] m ax peak refow temperature of 260 c [2] 4-digit lot number xxxx package information for price, delivery and to place orders: hittite microwave corporation, 2 elizabeth drive, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com application support: phone: 978-250-3343 or apps@hittite.com
mixers - i/q mixers, irm s & r eceivers - sm t 13 HMC6505LC5 v02.0413 gaas mmic i/q upconverter 5.5 - 8.6 ghz pin number function description i nterface s chematic 1 - 4, 6, 9 - 11, 16, 17, 19, 20, 21, 22, 24, 25, 32 n/c no connection required. the pins are not connected internally; however, all data shown herein was measured with these pins connected to r f/d c ground externally. 5 v dd1 power supply voltage for lo amplifer. s ee application circuit for required external components. 7 loin this pin is a c coupled and matched to 50 ohms. 8, 13, 15, 27, 29, 31 gnd these pins and package bottom must be connected to r f/d c ground. 12 v gg gate control for r f amplifer, please follow mmic amplifer biasing procedure application note. s ee application circuit for required external components. 14 r fout this pin is a c coupled and matched to 50 ohms. 18, 23 v dd3, v dd2 power supply voltage for r f amplifer. s ee application circuit for required external components. 26 v ctrl gain c ontrol v oltage for r f amplifer 28 i f1 differential i f input pins. for applications not requiring operation to d c , an off chip d c blocking capacitor should be used. for operation to d c this pin must not source/sink more than 3ma of current or part non function and possible part failure will result. 30 i f2 pin descriptions for price, delivery and to place orders: hittite microwave corporation, 2 elizabeth drive, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com application support: phone: 978-250-3343 or apps@hittite.com
mixers - i/q mixers, irm s & r eceivers - sm t 14 HMC6505LC5 v02.0413 gaas mmic i/q upconverter 5.5 - 8.6 ghz typical application c 1, c 3, c 4, c 13, c 16 100 pf c apacitor, 0402 pkg. c 5, c 7, c 8, c 14, c 17 1000 pf c apacitor, 0603 pkg. c 9, c 11, c 12, c 15, c 18 2.2 f c apacitor, c ase a pkg. for price, delivery and to place orders: hittite microwave corporation, 2 elizabeth drive, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com application support: phone: 978-250-3343 or apps@hittite.com
mixers - i/q mixers, irm s & r eceivers - sm t 15 HMC6505LC5 v02.0413 gaas mmic i/q upconverter 5.5 - 8.6 ghz evaluation pcb the circuit board used in the application should use r f circuit design techniques. s ignal lines should have 50 ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. a sufficient number of via holes should be used to connect the top and bottom ground planes. the evaluation circuit board shown is available from hittite upon request. list of materials for evaluation pcb eval01-HMC6505LC5 [1] i tem description j1, j2 sm a c onnector j3, j4 k- c onnector sri j5, j6, j8, j9 d c pins c 1, c 3, c 4, c 13, c 16 100 pf c apacitor, 0402 pkg. c 5, c 7, c 8, c 14, c 17 1000 pf c apacitor, 0603 pkg. c 9, c 11, c 12, c 15, c 18 2.2 f c apacitor, c ase a u1 h mc 6505l c 5 upconverter p c b [2] 125487 e valuation board [1] r eference this number when ordering complete evaluation p c b [2] c ircuit board m aterial: arlon 25f r , f r 4 or r ogers 4350 for price, delivery and to place orders: hittite microwave corporation, 2 elizabeth drive, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com application support: phone: 978-250-3343 or apps@hittite.com
mixers - i/q mixers, irm s & r eceivers - sm t 16 HMC6505LC5 v02.0413 gaas mmic i/q upconverter 5.5 - 8.6 ghz notes: for price, delivery and to place orders: hittite microwave corporation, 2 elizabeth drive, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com application support: phone: 978-250-3343 or apps@hittite.com

▲Up To Search▲

Price & Availability of HMC6505LC5

	To Download HMC6505LC5 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .