technical data sheet mini-smp right angle plug pcb full detent 18S203-40ML5 rosenberger hochfrequenztechnik gmbh & co. kg p.o.box 1260 d-84526 tittmoning germany www.rosenberger.de tel. : +49 8684 18-0 email : info@rosenberger.de page 1 / 2 rf_35/08.13/6.1 dieses dokument ist urheberrechtlich geschtzt this document is protected by copyright rosenberger hochfrequenztechnik gmbh & co. kg all dimensions are in mm; tolerances acc. iso 2768 m-h interface according to mil-std-348 mateable with gppo tm (gilbert engineering co., inc.) and ssmp tm (connectors devices, inc.) documents pcb layout b 203 tape & reel packaging vg50.2m500 material and plating connector parts material plating center contact cube aurodur?, gold plated outer contact brass aurodur?, gold plated dielectric ptfe
technical data sheet mini-smp right angle plug pcb full detent 18S203-40ML5 rosenberger hochfrequenztechnik gmbh & co. kg p.o.box 1260 d-84526 tittmoning germany www.rosenberger.de tel. : +49 8684 18-0 email : info@rosenberger.de page 2 / 2 rf_35/08.13/6.1 dieses dokument ist urheberrechtlich geschtzt this document is protected by copyright rosenberger hochfrequenztechnik gmbh & co. kg electrical data impedance 50 w frequency dc to 65 ghz return loss 3 26 db @ dc to 6 ghz 3 19 db @ 6 ghz to 18 ghz 3 14 db @ 18 ghz to 26.5 ghz insertion loss 0.1 x [ghz] f db insulation resistance 3 5 g w center contact resistance 6 m w outer contact resistance 2 m w working voltage (at sea level) 325 v rms (at 70000 feet) 125 v rms return loss in application depends decisive on pcb layout mechanical data mating cycles 3 100 center contact captivation 3 7 n engagement force 19 n typical disengagement force 29 n typical environmental data temperature range -55 c to +155 c thermal shock mil-std-202, method 107, condition b vibration mil-std-202, method 204, condition b shock mil-std-202, method 213, condition a moisture resistance mil-std-202, method 106 climatic category iec 60068 55/155/21 max. soldering temperature iec 61760-1, +260 c for 10 sec. rohs compliant tooling n/a suitable cables n/a weight weight 0.4 g/pce draft date approved date rev. engineering change number name date inge mhlauer 14/12/04 b_aicher 08.12.15 e00 15-1674 c_schmidinger 08.12.15 while the information has be en carefully compiled to the best of our knowledge, nothing is intended as representation or warranty on our part and no statement herein shall be construed as recommendation to infringe existing patents. in the effort to improve our products, we reserve the right to make changes judg ed to be necessary.
|
