page 1 of 3 www.durakoolrelays.com sales department tel: (888) 847-6552 dg34 pcb / industrial power relay contacts contact number & arrangement spst-no (1 normally open); spdt ( 1 changeover) contact material agsno 2 (standard), agcdo max. switching voltage agsno 2 : 250vac / 110vdc agcdo : 250vac / 28vdc min. switching current / voltage 500ma/12vdc (agcdo, agsno 2 ) max. continuous current agsno 2 : spst-no: 40a / spdt: 40a (no), 30a (nc) agcdo : spst-no: 30a / spdt: 30a (no), 20a (nc) max. switching current agsno 2 : spst-no: 40a / spdt: 40a (no), 30a (nc) max. switching power agsno 2 : 7200va / 1100w : agcdo: 6000va / 560w initial resistance 100m?, max. at 0.1a/6vdc coil rated voltage 3...110vdc; 12...220vac must release voltage dc 0.1u n : ac 0.3u n operating range of supply voltage see coil tables 1 & 2 rated power consumption 0.93w (dc), 1.2va (ac) insulation insulation resistance >100m? at 500vdc, 50%rh dielectric strength coil to contact 4000vrms, 1min (50hz) between open contacts 1500vrms, 1min (50hz) creepage / clearance - coil to contact 3mm general data operating time (typical) ms 15 release time (typical) ms 10 electrical life ops 1 x 10 5 (1s on / 1s off) mechanical life ops 1 x 10 6 (300 ops per minute) dimensions l x w x h various - see dimensional drawings. (figs 1 & 4) weight 36g ambient temperature storage -40 to 155c operating -40 to 125c shock resistance functional: 10g 11ms; destructive: 100g drop resistance 1m height drop on to concrete (sealed type only) vibration resistance 10-55hz: da 1.5mm ? up to 40a /240vac continuous rating ? 110vdc maximum switching voltage ? industry standard style ? cost effective ? rohs compliant ref: dg34 041515 jhm e325835 specifcations are subject to change without notice. e&oe.
dg34 pcb / industrial power relay ref: dg34 041515 jhm coil data table 1 dc coil coil voltage code nominal voltage (vdc) coil resistance (?) 10% nominal operating power must operate voltage max. (vdc) max. allowable voltage (vdc) must release voltage min. (vdc) 1003 3 10 0.93w 2.25 1 3 0 % of nominal 0.30 1005 5 28 3.75 0.50 1006 6 40 4.50 0.60 1009 9 90 6.75 0.90 1012 12 160 9.00 1.20 1018 18 360 13.50 1.80 1024 24 640 18.00 2.40 1048 48 2,560 36.00 4.80 1110 110 13,445 82.50 11.00 ul class f coil insulation standard. (others to special order) ac coil coil voltage code nominal voltage (vac) coil resistance (?) 10% nominal operating power must operate voltage max. (vac) max. allowable voltage (vdc) must release voltage min. (vac) 5012 12 27 1.2va 9.00 1 3 0 % of nominal 3.60 5024 24 120 18.00 7.20 5110 110 2,360 82.50 33.00 5120 120 3,040 90.00 36.00 5220 220 13,490 165.00 66.00 ul class f coil insulation standard. (others to special order) page 2 of 3 www.durakoolrelays.com sales department tel: (888) 847-6552 all dimensions in mm overall dimensions - pcb relays fig. 1 4.3 15. 6 23. 3 28. 9 pcb open 2 or 3 - 6.4 qc 4.3 23.3 25. 1 28. 9 pcb open + qc pcb mounting dimensions fig. 2 bottom view (* see note 2 ) pcb wiring diagrams fig. 3 4.3 20. 2 12. 8 27. 6 24. 0 20. 0 32. 5 18. 5 pcb cove re d 3 bottom view 3.8 14.0 specifcations are subject to change without notice. e&oe.
dg34 pcb / industrial power relay american electronic components inc., 1101 lafayette st. elkhart, in46516 page 3 of 3 www.durakoolrelays.com sales department tel: (888) 847-6552 specifcations are subject to change without notice. e&oe. ref: dg34 041515 jhm notes: 1) all parameters, unless otherwise specifed, are measured at an ambient temperature of 23c. 2) pcb mounting holes - the * hole is not needed for the spst-no version. 3) at an ambient temperature of 85c, the maximum allowable coil voltage should be reduced to 72%. 4) electrical life obtained at resistive or inductive load at 30a/15vdc with suitable arc suppression attached and with an operating frequency of 1 op/sec. ordering codes type contact material contact arrangement cover protec - tion and mounting coil code d g 3 4 - - - contact material 10 - agcdo (30a/20a) see table 1 30 - agsno 2 (40a/30a) (rohs compliant) contact arrangement 11 - spdt ( 1 changeover) 21 - spst-no (1 normally open) cover protection category 1 - no cover (open frame). not available with terminal option 6 3 - covered, sealed. ip67 7 - covered, dust cover terminations and mounting 0 - pcb + qc terminals for contacts (open frame only) 5 - pcb only (no qc terminals) 6 - chassis mounting qc terminals for contacts and coil all dimensions in mm overall dimensions - chassis mount relays fig. 4 wiring diagrams-chassis mount relays fig. 5 * qc terminals 6.35 x 0.8 0.03 mm for contacts 2.8 x 0.8 0.03 mm for coil
|
