maximum ratings operating temperature -55c to 85c storage temperature -55c to 100c absolute max. supply voltage (vcc) 6v absolute max. tuning voltage (vtune) 22v all specifcations 50 ohm system electrical specifcations coaxial voltage controlled oscillator wide band 400 to 1300 mhz ? very wide band frequency ? linear tuning characteristics ? low phase noise ? low pushing ? protected by us patent 6,790,049 features ? r & d ? lab ? instrumentation ? wireless communications ? industrial communications ? test equipment applications ZX95-1300+ case style: gb956 connectors model sma ZX95-1300-s+ rev. a m152815 edr-11366 ZX95-1300+ rav 150909 page 1 of 2 model freq. power phase noise tuning non harmonics pulling pushing dc no. (mhz) output dbc/hz ssb at offset harmonic (dbc) pk-pk (mhz/v) operating (dbm) frequencies,khz voltage sensi- port 3 db spurious @12 dbr power range tivity cap modulation (dbc) (mhz) typ. (v) (mhz/v) (pf) bandwidth vcc current (mhz) (volts) (ma) min. max. typ. 1 10 100 1000 min. max. typ. typ. typ. typ. typ. max. typ. typ. max. ZX95-1300+ 400 1300 +8 -70 -95 -120 -141 0.3 20 25-65 120 30 -90 -11 - 3.5 3 5 42 permanent damage may occur if any of these limits are exceeded. outline drawing outline dimensions ( ) inch mm a b c d e f g h j k l m n p q r s t wt. 1.20 .75 .46 1.18 .04 .38 .38 .57 .18 .33 .21 .22 .18 1.00 .50 .35 .18 .106 grams 30.48 19.05 11.68 29.97 1.02 9.65 9.65 14.48 4.57 8.38 5.33 5.59 4.57 25.40 12.70 8.89 4.57 2.69 35.0 note: when soldering the dc connections, caution must be used to avoid overheating the dc terminals. see application note an-40-10 . ! notes a. performance and quality attributes and conditions not expressly stated in this specifcation document are intended to be excluded and do not form a part of this specifcation document. b. electrical specifcations and performance data contained in this specifcation document are based on mini-circuits applicable established test performance criteria and measurement instructions. c. the parts covered by this specifcation document are subject to mini-circuits standard limited warranty and terms and conditions (collectively, standard terms); purchasers of this part are entitled to the rights and benefts contained therein. for a full statement of the standard terms and the exclusive rights and remedies thereunder, please visit mini-circuits website at www.minicircuits.com/mclstore/terms.jsp mini-circuits ? www.minicircuits.com p.o. box 350166, brooklyn, ny 11235-0003 (718) 934-4500 sales@minicircuits.com +rohs compliant the +suffix identifies rohs compliance. see our web site for rohs compliance methodologies and qualifications
performance data & curves* page 2 of 2 *at 25 o c unless mentioned otherwise ZX95-1300+ 50 60 70 1050 1300 1550 y (mhz) ZX95-1300+ frequency and tuning sensitivity 20 30 40 300 550 800 0 4 8 12 16 20 frequenc y t i v lt (v) freq. @ -55c freq. @ +25c freq. @ +85c t.sens @ +25c t un i ng v o lt age (v) 8 9 10 w er (dbm) ZX95-1300+ power output -55c +25c +85c 5 6 7 0 4 8 12 16 20 output po w t i v lt (v) t un i ng v o lt age (v) 2.3 2.9 3.5 6 8 10 m hz) ( mhz/v) ZX95-1300+ frequency pulling & pushing (vcc 5%) pulling pushing 0.5 1.1 1.7 0 2 4 0 4 8 12 16 20 pulling ( m pushing ( tuning voltage (v) tuning voltage (v) -90 -70 -50 (dbc/hz) ZX95-1300+ phase noise vs. tuning voltage 1khz 10khz 100khz 1mhz -150 -130 -110 0 4 8 12 16 20 phase noise t i v lt (v) t un i ng v o lt age (v) -20 -10 0 (dbc) ZX95-1300+ harmonics level f2 f3 f4 -50 -40 -30 0 4 8 12 16 20 harmonics t i v lt (v) t un i ng v o lt age (v) -100 -90 -80 -70 (dbc/hz) ZX95-1300+ phase noise -150 -140 -130 -120 -110 1 10 100 1000 phase noise f off (kh ) f requency off set (kh z ) v tune frequency power output icc harmonics (dbc) freq. freq. phase noise (dbc/hz) freq phase tune sens (mhz) (dbm) (ma) push pull at offsets offset noise at (mhz/v) (mhz/v) (mhz) (khz) 850 mhz -55 c +25 c +85 c -55 c +25 c +85 c f2 f3 f4 1khz 10khz 100khz 1mhz (dbc/hz) 0.00 63.57 354.3 347.6 337.7 9.47 7.43 5.58 34.27 -9.0 -17.2 -25.6 2.98 0.81 -70.31 -93.2 -119.1 -141.2 1.0 -74.08 0.30 59.68 374.3 366.7 357.5 9.55 8.00 6.25 34.19 -9.1 -16.7 -23.7 3.13 1.02 -70.09 -93.1 -118.6 -140.4 2.5 -85.49 2.00 46.89 472.0 461.8 454.6 9.66 9.46 8.20 34.13 -9.8 -15.6 -19.4 2.07 4.23 -71.65 -95.8 -120.3 -140.9 4.2 -90.81 3.00 45.43 519.8 508.7 501.3 9.38 9.24 7.96 34.25 -10.4 -16.0 -21.5 1.86 4.51 -72.21 -96.1 -120.1 -140.7 7.3 -96.47 4.00 46.07 565.7 554.1 546.8 9.17 9.04 7.84 34.39 -10.7 -16.1 -24.5 1.81 1.24 -73.65 -96.5 -120.0 -140.7 10.0 -99.68 5.00 49.34 612.8 600.2 592.7 8.90 8.78 7.64 34.50 -11.2 -16.8 -29.1 1.79 3.75 -73.57 -96.9 -120.1 -140.7 12.0 -101.64 6.00 53.58 662.7 649.5 641.6 8.65 8.50 7.59 34.66 -11.1 -18.0 -29.7 1.63 5.25 -73.57 -97.5 -121.1 -141.7 23.6 -108.41 7.00 58.48 717.3 703.1 694.4 8.37 8.25 7.57 34.82 -10.5 -20.2 -26.1 1.36 3.56 -74.90 -98.4 -121.6 -142.2 39.5 -113.69 8.00 62.94 775.9 761.6 752.6 8.15 8.03 7.49 35.00 -10.1 -23.8 -24.4 1.15 3.43 -73.96 -99.0 -122.5 -143.1 65.2 -118.85 9.00 64.76 839.5 824.5 814.9 7.90 7.84 7.39 35.08 -9.7 -29.0 -23.2 1.16 2.66 -73.99 -99.7 -123.0 -143.6 100.0 -123.15 10.00 64.67 904.9 889.3 879.2 7.72 7.70 7.29 35.12 -9.1 -31.5 -22.6 1.32 2.66 -74.25 -99.3 -123.1 -143.6 109.3 -124.17 12.00 57.31 1031.6 1015.6 1005.7 7.54 7.43 6.92 34.72 -8.9 -34.0 -22.4 2.50 3.14 -72.83 -98.7 -123.1 -143.8 153.5 -127.25 13.00 50.94 1088.6 1073.0 1063.5 7.54 7.32 6.70 34.49 -9.2 -36.2 -22.3 2.83 3.23 -73.57 -98.6 -123.1 -144.0 180.2 -128.78 14.00 45.07 1140.3 1123.9 1114.7 7.53 7.24 6.47 34.25 -9.8 -40.2 -23.4 2.85 3.22 -73.23 -98.2 -122.8 -143.7 215.4 -130.44 15.00 39.74 1185.1 1169.0 1160.4 7.51 7.09 6.18 34.12 -10.6 -37.4 -24.1 2.58 3.43 -71.75 -97.8 -122.5 -143.6 302.4 -133.34 16.00 35.29 1225.2 1208.7 1200.4 7.49 6.98 5.92 34.03 -11.3 -35.9 -25.3 2.35 2.66 -71.87 -97.7 -122.3 -143.3 355.1 -134.84 17.00 31.49 1260.3 1244.0 1236.1 7.42 6.83 5.74 34.01 -11.9 -33.4 -25.6 2.15 3.69 -71.15 -97.8 -122.2 -143.2 498.5 -137.79 18.00 28.41 1292.1 1275.5 1267.5 7.35 6.71 5.62 34.01 -12.8 -31.0 -26.2 2.06 2.04 -72.71 -97.9 -122.1 -143.1 595.9 -139.36 19.00 24.92 1320.5 1303.9 1295.7 7.27 6.65 5.60 34.05 -13.6 -28.6 -26.5 2.05 3.54 -70.71 -97.4 -121.9 -142.9 982.3 -143.60 20.00 22.09 1345.7 1328.8 1320.5 7.25 6.60 5.59 34.08 -14.4 -27.0 -27.0 2.06 4.05 -71.44 -97.4 -121.7 -142.6 1000.0 -143.76 notes a. performance and quality attributes and conditions not expressly stated in this specifcation document are intended to be excluded and do not form a part of this specifcation document. b. electrical specifcations and performance data contained in this specifcation document are based on mini-circuits applicable established test performance criteria and measurement instructions. c. the parts covered by this specifcation document are subject to mini-circuits standard limited warranty and terms and conditions (collectively, standard terms); purchasers of this part are entitled to the rights and benefts contained therein. for a full statement of the standard terms and the exclusive rights and remedies thereunder, please visit mini-circuits website at www.minicircuits.com/mclstore/terms.jsp mini-circuits ? www.minicircuits.com p.o. box 350166, brooklyn, ny 11235-0003 (718) 934-4500 sales@minicircuits.com
|