LSCHG-3 crystal clock oscillator specification issue 1; april 2016 outline (mm) sm1 = gold plated (rohs) wave form suggested land pattern description statek s high shock , low current lschg oscillators, available in tight frequency tolerances, consist of a statek miniature quartz crystal and a cmos/ tt l compatible hybrid circuit in a ceramic package. each crystal used in the lschg oscillator is pre-qualified before assembly through electrical tests and characterisation over temperature. sm1 gold plated (rohs) sm5 solder dipped (rohs) please note that all data is only valid at 25c unless otherwise stated. frequency parameters frequency 100.0khz to 200.0khz 100.00ppm frequency tolerance +/-3ppm max per year ageing please note: the frequency stability does not include the calibration tolerance. positive variations may be small compared to negative variation. supply voltage variation: 3ppm/v max load variation: 1ppm max ref 10% change in load electrical parameters 3.3v 10% supply voltage please note: lower voltages and calibration tolerances tighter than 100ppm many be availible, please contact one of our sales o ffices . absolute maximum supply voltage range: -0.5v to 7v operating temperature ranges -10 to 70c -40 to 85c -55 to 125c output details output compatability cmos drive capability 15pf output levels: voh 2.8v min vol 0.2v max environmental parameters storage temperature range: -55 to 125c shock: up to 50,000g peak 1ms, half sine vibration: 10g rms, 10-2000hz manufacturing details process temperature: 260c for 20sec max printed on 27 apr 16 11 :16 using model data sheet v1.2550 page 1 of 2 sales office contact details: usa: +1.760.318.2824 france: 0800 901 383 uk: +44 (0)1460 270200 germany: 0800 1808 443 email: info@iqdfrequencyproducts.com web : www.iqdfrequencyproducts.com
LSCHG-3 crystal clock oscillator specification ordering information frequency* model termination variant * pad 1 function* tolerance temperature range * example: 100khz LSCHG-3-sm1 nc 100 -70 to 70c compliance compliant rohs status ( 20 11 /65/eu) compliant reach status ms l rating (jdec-std-033): not applicable packaging details tape and reel, 16mm tape, 7" or 13" reels pack style: reel pack size: 1,000 tray pack pack style: tray pack size: 100 electrical specification - maximum limiting values 3.3v 10% frequency min frequency max temperature range stability (min) current draw rise and fall time duty cycle c ppm ma ns % 0.03 50 -10 to 70 100.0khz 200.0khz 40/60 - 0.03 50 -40 to 85 40/60 - 0.03 50 -55 to 125 40/60 - this document was correct at the time of printing; please contact your local sales office for the latest version. click to view latest version on our website. printed on 27 apr 16 11 :16 using model data sheet v1.2550 page 2 of 2 sales office contact details: usa: +1.760.318.2824 france: 0800 901 383 uk: +44 (0)1460 270200 germany: 0800 1808 443 email: info@iqdfrequencyproducts.com web : www.iqdfrequencyproducts.com
|
