unisonic technologies co., ltd mgbr20l80c preliminary diode www.unisonic.com.tw 1 of 3 copyright ? 2015 unisonic technologies co., ltd qw-r204-060.a dual mos gated barrier rectifier ? description the utc mgbr20l80c is a dual mos gated barrier rectifiers, it uses utc?s advanced technology to provide customers with low forward voltage drop and high switching speed, etc. ? features * low forward voltage drop * high switching speed ? symbol ? ordering information ordering number pin assignment lead free halogen free package 1 2 3 packing mgbr20l80cl-ta3-t MGBR20L80CG-TA3-T to-220 a k a tube mgbr20l80cl-tf3-t mgbr20l80cg-tf3-t to-220f a k a tube note: pin assignment: a: anode k: cathode ? marking
mgbr20l80c preliminary diode unisonic technologies co., ltd 2 of 3 www.unisonic.com.tw qw-r204-060.a ? absolute maximum ratings (per leg) (t a =25c unless otherwise specified) single phase, half wave, 60hz, resistive or inductive load. for capacitance load, derate current by 20%. parameter symbol ratings unit dc blocking voltage v rm 80 v working peak reverse voltage v rwm 80 v repetitive peak reverse voltage v rrm 80 v per leg 10 a average rectified output current per device total i o 20 a non-repetitive peak forward surge current 8.3ms single half sine-wave superimposed on rated load i fsm 100 a operating junction temperature t j -65 ~ +175 c storage temperature t stg -65 ~ +175 c note: absolute maximum ratings are those values beyond which the device could be permanently damaged. absolute maximum ratings are stress ratings only and functional device oper ation is not implied. ? thermal data parameter symbol ratings unit junction to ambient ja 62.5 c/w junction to case jc 2 c/w ? electrical characteristics (per leg) (t a =25 c unless otherwise specified.) parameter symbol test conditions min typ max unit reverse breakdown voltage (note 1) v (br)r i r =0.50ma 80 v i f =10a, t j =25c 0.81 v i f =10a, t j =125c 0.70 v v r =80v, t j =25c 600 a leakage current (note 1) i rm v r =80v, t j =125c 20 ma notes: 1. short duration pulse test used to minimize self-heating effect. 2. thermal resistance junction to case mounted on heatsink.
mgbr20l80c preliminary diode unisonic technologies co., ltd 3 of 3 www.unisonic.com.tw qw-r204-060.a utc assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all utc products described or contained herein. utc products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. the information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice.
|
