page 1 of 2 level 7 (lo power +7 dbm) 0.15 to 400 mhz frequency mixer coaxial outline dimensions ( ) inch mm maximum ratings coaxial connections lo l rf r if x outline drawing electrical specifcations rev. c m151107 zp-3 dj/td/cp 151009 1 db comp.: +1 dbm typ. for phase detection, dc output has positive polarity with in-phase lo and rf signals. frequency (mhz) conversion loss (db) lo-rf isolation (db) lo-if isolation (db) lo/rf if mid-band m total range max. l m u l m u f l -f u x max. ty p. min. ty p. min. ty p. min. ty p. min. ty p. min. ty p. min. 0.15-400 dc-400 4.7 0.10 7.0 8.0 60 50 46 30 35 25 60 40 47 25 35 20 typical performance data electrical schematic zp-3+ zp-3 l = low range [f l to 10 f l ] m = mid range [10 f l to f u /2] u = upper range [f u /2 to f u ] m= mid band [2f l to f u /2] features ? low conversion loss, 4.7 db typ. ? if response to dc ? excellent l-r isolation, 46 db typ., l-i, 47 db typ. ? rugged shielded case applications ? vhf/uhf ? cellular ? instrumentation operating temperature -55c to 100c storage temperature -55c to 100c rf power 50mw if current 40ma case style: gg60 connectors model bnc zp-3+ sma ZP-3-S(+) a b c d e f g h wt 2.31 1.20 .60 .125 2.062 .30 .53 .63 grams 58.67 30.48 15.24 3.18 52.37 7.62 13.46 16.00 75.0 bnc version shown frequency (mhz) conversion loss (db) vswr rf port (:1) frequency (mhz) isolation l-r (db) isolation l-i (db) vswr lo port (:1) rf lo lo +7dbm lo +7dbm lo lo +7dbm lo +7dbm lo +7dbm 0.15 30.15 5.37 1.57 10.00 68.68 61.84 2.59 0.23 30.23 5.27 1.41 20.00 65.36 56.87 2.60 0.30 30.30 5.21 1.33 30.00 63.22 54.20 2.59 0.50 30.50 5.16 1.25 40.00 61.75 52.09 2.58 1.00 31.00 5.08 1.21 76.00 57.56 47.59 2.54 2.80 32.80 4.91 1.21 94.00 56.48 45.97 2.50 6.40 36.40 4.91 1.21 112.00 54.90 44.70 2.50 10.00 40.00 4.73 1.21 149.00 52.63 42.36 2.57 28.00 58.00 4.71 1.21 168.00 54.13 42.02 2.55 64.00 94.00 4.75 1.17 206.00 49.62 38.81 2.62 100.00 130.00 4.83 1.14 225.00 48.10 38.56 2.66 138.00 168.00 4.85 1.13 244.00 48.03 37.82 2.68 157.00 187.00 4.88 1.10 282.00 53.65 37.79 2.67 195.00 225.00 4.92 1.08 301.00 55.10 38.07 2.76 233.00 263.00 4.97 1.10 320.00 54.03 37.59 2.82 252.00 282.00 5.10 1.12 340.00 52.86 36.62 2.76 271.00 301.00 5.17 1.14 360.00 51.53 35.44 2.69 290.00 320.00 5.15 1.17 390.00 47.44 33.11 2.86 370.00 340.00 5.38 1.10 410.00 45.39 32.24 3.05 400.00 370.00 5.41 1.05 430.00 44.42 32.17 3.06 permanent damage may occur if any of these limits are exceeded. notes a. performance and quality attributes and conditions not expressly stated in this specifcation document are intended to be excluded and do not form a part of this specifcation document. b. electrical specifcations and performance data contained in this specifcation document are based on mini-circuits applicable established test performance criteria and measurement instructions. c. the parts covered by this specifcation document are subject to mini-circuits standard limited warranty and terms and conditions (collectively, standard terms); purchasers of this part are entitled to the rights and benefts contained therein. for a full statement of the standard terms and the exclusive rights and remedies thereunder, please visit mini-circuits website at www.minicircuits.com/mclstore/terms.jsp mini-circuits ? www.minicircuits.com p.o. box 350166, brooklyn, ny 11235-0003 (718) 934-4500 sales@minicircuits.com +rohs compliant the +suffix identifies rohs compliance. see our web site for rohs compliance methodologies and qualifications
page 2 of 2 connectors model bnc zp-3+ sma ZP-3-S(+) performance charts zp-3 conversion loss 4.5 5.0 5.5 6.0 6.5 7.0 7.5 0.1 1 10 100 1000 frequency (mhz) conversion loss (db) lo=+4 dbm lo=+7 dbm lo=+10 dbm at if freq of 30 mhz zp-3 l-r isolation 30 40 50 60 70 80 0 100 200 300 400 frequency (mhz) isolation (db) lo=+4 dbm lo=+7 dbm lo=+10 dbm zp-3 l-i isolation 20 30 40 50 60 70 0 100 200 300 400 frequency (mhz) isolation (db) lo=+4 dbm lo=+7 dbm lo=+10 dbm zp-3 lo vswr 1.0 1.5 2.0 2.5 3.0 3.5 4.0 0 100 200 300 400 frequency (mhz) vswr lo=+4 dbm lo=+7 dbm lo=+10 dbm zp-3 rf vswr 1.0 1.5 2.0 2.5 0.1 1 10 100 1000 frequency (mhz) vswr lo=+4 dbm lo=+7 dbm lo=+10 dbm zp-3 if vswr 1.0 1.5 2.0 2.5 0.1 1 10 100 1000 frequency (mhz) vswr lo=+4 dbm lo=+7 dbm lo=+10 dbm at lo freq of 400 mhz zp-3+ zp-3 notes a. performance and quality attributes and conditions not expressly stated in this specifcation document are intended to be excluded and do not form a part of this specifcation document. b. electrical specifcations and performance data contained in this specifcation document are based on mini-circuits applicable established test performance criteria and measurement instructions. c. the parts covered by this specifcation document are subject to mini-circuits standard limited warranty and terms and conditions (collectively, standard terms); purchasers of this part are entitled to the rights and benefts contained therein. for a full statement of the standard terms and the exclusive rights and remedies thereunder, please visit mini-circuits website at www.minicircuits.com/mclstore/terms.jsp mini-circuits ? www.minicircuits.com p.o. box 350166, brooklyn, ny 11235-0003 (718) 934-4500 sales@minicircuits.com
|
