8 54675 70 mhz saw filter data sheet: rev - 6 / 14 /1 1 - 1 of 6 - disclaimer: subject to change without notice e ? 201 1 triquint semiconductor, inc. connecting the digital world to the global network ? applications general purpose for if applications product features functional block diagram top view typical 3 db bandwidth of 30 mhz low loss high attenuation single - ended operation ceramic surface mount package (smp) small size dimensio ns: 13.30 x 6.50 x 1.75mm hermetic ally sealed rohs compliant, pb - free g eneral description pin configuration the 85 4 675 is a h igh - performance if saw filter with a center frequency of 70 mhz and a 3db bandwidth of 30 mhz. it features low loss with excellent attenuation, and is designed to be used with a single ended input and output. the device is rohs compliant and pb - free. pin # description 11 input 5 output 6 output return 12 input return 1, 2,3,4 ,7,8,9 ,10 case ground ordering info rmation part no. description 85 4 67 5 packaged part 85 4 67 5 - evb evaluation board standard t/r size = 2000 units/ reel. pb 4 3 2 1 10 9 8 7 12 11 5 6 input output input return gnd gnd gnd gnd gnd gnd gnd gnd output return
8 54675 70 mhz saw filter data sheet: rev - 6 / 14 /1 1 - 2 of 6 - disclaimer: subject to change without notice e ? 201 1 triquint semiconductor, inc. connecting the digital world to the global network ? specifications electrical specifications (1) specified t emperature range: + 2 5 oc parameter conditions min typ ical ( 2 ) max units center frequency 69.8 70 70.2 mhz insertion loss at 70 mhz - 17.5 18.5 db 1 db bandwidth ( 3 ) 28.75 29.15 - mhz 3 db bandwidth (3) 30 30.3 - mhz 40 db bandwidth ( 3 ) - 37 38.1 mhz passband ripple - 0.8 1.0 db p - p phase linea rity (90% of 3 db bandwidth) - 9.7 13 deg p - p group delay variation (90% of 3 db bandwidth) - 50 90 ns p - p absolute delay - 1.07 - ns p - p temperature coefficient - - 94 - p pm/ oc source impedance (single - ended) ( 4 ) - 50 - load impedance (single - ended) ( 4 ) - 50 - notes: 1. all specifications are based on the triquint schematic for the main reference design shown on page 3 2. typical values are based on average measurements at room temperature 3. r elative to minimum insertion loss 4. this is the optimum impedance in order to achieve the performance show n absolute maximum ratings parameter rating operating temperature ( 5 ) - 40 to +85 o c storage temperature - 40 to + 85 o c 5. device may operate over this range with deg raded e lectrical specifications operation of this device outside the parameter ranges given above may cause permanent damage.
8 54675 70 mhz saw filter data sheet: rev - 6 / 14 /1 1 - 3 of 6 - disclaimer: subject to change without notice e ? 201 1 triquint semiconductor, inc. connecting the digital world to the global network ? reference design C 50 se input, 50 se output schematic 50 single - ended input 50 single - ended output notes: 1. actual matching values may vary due to pcb layout and parasitic s testing fixture top test fixture bottom bill of material reference d es g. value description manufacturer part number l1 180 nh coil wire - wound, 0805 , 5 % coillcraft 0805cs - 181 xjlc l2 120 nh coil wire - wound, 0805 , 5 % coilcraft 0805cs - 121 xjlc sma n/a sma connector radiall usa inc. 9602 - 1111 - 018 pcb n/a 3 - layer multiple 9 909 33 1,2,3,4,6 7,8,9,10,12 50 180nh 11 5 120nh 50
8 54675 70 mhz saw filter data sheet: rev - 6 / 14 /1 1 - 4 of 6 - disclaimer: subject to change without notice e ? 201 1 triquint semiconductor, inc. connecting the digital world to the global network ? typical performance (at room temperature)
8 54675 70 mhz saw filter data sheet: rev - 6 / 14 /1 1 - 5 of 6 - disclaimer: subject to change without notice e ? 201 1 triquint semiconductor, inc. connecting the digital world to the global network ? mechanical information package information, dimensions and marking package style: smp - 53 dimensions: 13.30 x 6.50 x 1. 75 mm body: al 2 o 3 ceramic lid: kovar , ni plated terminations: au plating 0.5 - 1.0m, over a 2 - 6m ni plating all dimensions shown are nominal in millimeters all tolerances are 0.15mm except overall length and width 0.10mm the date code consists of: day of the current year (julian, 3 digits), last digit of the y ear (1 digit) and hour (2 digits) tape and reel information standard t/r size = 2000 units/reel. all dimensions are in millimete rs 1.75 nom. 1.96 max. 0.76 jjjyhh date code id dot sawtek 854675 0.79 1.17 x 3.76 1.50 2.54 6.50 2.18 2.54 13.3 a a 24 1.75 11.5 ?1.5 2.3 13.9 4.0 ?1.5 2.0 0.3 12.0 7.1 section a-a direction of travel ?330 24.8 2.7 ?102 ?13.0 ?20.2 2.0 id dot
8 54675 70 mhz saw filter data sheet: rev - 6 / 14 /1 1 - 6 of 6 - disclaimer: subject to change without notice e ? 201 1 triquint semiconductor, inc. connecting the digital world to the global network ? product compliance information esd information esd rating: tbd value: passes tbd v min . test: human body mod el (hbm) standard: jedec standard jesd22 - a114 esd rating: tbd value: passes tbd v min . test: machine model (mm) standard: jedec standard jesd22 - a115 solderability compatible with th e latest version of j - std - 020, l ead free solder, 260 c refer to soldering profile for recommended guidelines. this part is compliant with eu 2002/95/ec rohs directive (restrictions on the use of certain hazardous substances in electrical and elect ronic equipment). this product also has the following attributes: halogen free (chlorine, bromine) antimony free tbbp - a (c 15 h 12 br 4 0 2 ) free pfos free svhc free msl rating de vices are hermetic, therefore m s l is not applicable . contact information fo r the latest specifications, additional product information, worldwide sales and distribution locations, and information abou t triquint: web: www.triquint.com tel: +1. 407 . 886 . 8860 email: info - sales@tqs.com fax: +1. 407 . 886 . 7061 for technical questions and application information: email: applications.engineering@tqs.com important notice the information contained he rein is believed to be reliable . triquint makes no warranties regarding the information contain herein . triquint assumes no responsibility or liability whatsoever for any of the information contained her ein. triquint assumes no responsibility or liabili ty whatsoever for the use of the information contained herein. the information contained herein is provided "as is, where is" and with all faults, and the entire risk associated with such information is entirely wi th the user. all information contained h erein is subject to change without notice. customers should obtain and verify the latest relevant information before placing orders for triquint products. the information contained herein or any use of such information does not grant, explicitly or impli citly, to any party any patent rights, licenses, or any other intellectual property rights, whether with regard to such information itself or anything described by such information. triquint products are not warranted or authorized for use as critical components in medical, life - saving, or life - sustaining applications, or other applications where a failure would reasonably be expected to cause severe personal injury or death. caution! esd - sensitive device
|
