technical data sheet draft 15 cable assembly lh1-057-xxx-nm rosenberger hochfrequenztechnik gmbh & co. kg tel.: +49 8684 180 page p.o.box 1260 d84526 tittmoning germany fa x: +49 8684 18499 www.rosenberger.de email: info@rosenberger.de 1 / 2 rf_35/06.07/5.0 all dimensions are in mm; tolerances according to i so 2768 mh cables rtk 013 cable group h1 micro coax cable ?=1.37mm, c enter conductor ?=0.3mm connector are only sold with cable. standard length available and customized length on request. picture on data sheet show an assembly example minimum bending radius repeated 8x ?, single 4x ? available variants technical data connector 15z2021h1 all dimesions are in mm; tolerances according to is o 2768 mh interface according to 15c10240m, micro clamp type cable length a [mm] weight [g] packing [pcs in plastic bag] lh1057300 h1 (rtk013) 300 5 5.70 25 lh1057500 h1 (rtk013) 500 5 tbm 10
technical data sheet micro rf cable assembly lh1-057-xxx-nm rosenberger hochfrequenztechnik gmbh & co. kg tel.: +49 8684 180 page p.o.box 1260 d84526 tittmoning germany fa x: +49 8684 18499 www.rosenberger.de email: info@rosenberger.de 2 / 2 rf_35/12.04/3.0 material and plating connector parts material plating center contact spring bronze 36m ag over 0,21m cu outer contact brass aurodur?, gold plated isolator lcp electrical data impedance 50 w frequency dc to 6 ghz return loss (over 2 assemblies) 3 26 db, dc to 2 ghz 3 23 db, 2 to 4 ghz 3 20 db, 4 to 8 ghz insertion loss (over 2 assemblies) 1 db, dc to 2 ghz 2 db, 2 to 4 ghz 5 db, 4 to 8 ghz insulation resistance 3 0.5 x10 3 m w center contact resistance 50 m w outer contact resistance 100 m w mechanical data mating cycles 50 mating force tbm unmating force tbm environmental data temperature range 40c to +90c storage temperature 40c to +90c 2002/95/ec (rohs) compliant draft date approved date rev. engineering change n umber name date f.michelmann 30/09/09 f. michelmann 03.08.12 400 1 2-v303 s.hofmeister 03.08.12 while the information has been carefully compiled t o the best of our knowledge, nothing is intended as representation or warranty on our part and no statement herein shall be construed as recommendation to infringe existing patents. in the effort to improv e our products, we reserve the right to make changes judg ed to be necessary.
|