ts5 www.vishay.com vishay sfernice revision: 22-sep-15 1 document number: 51007 for technical questions, contact: sferpottrimmers @vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 5 mm square surface mount miniature trimmers single-turn cermet fully sealed the ts5 trimming potentiome ter has been designed for surface mount applications and offers volumetric efficiency (5 mm x 5 mm x 2.7 mm) wi th high performance and stability. the ts5 design is suitable for both manual or automatic operation, and can withstand wave and reflow soldering techniques. features ? 0.25 w at 70 c ? professional grade ? wide ohmic range (10 ? to 1 m ? ) ? full sealing ? low contact resistance variation (1 % or 3 ? ) ? small size for optimum packaging density ? tests according to cecc 41000 or iec 60393-1 ? material categorization: fo r definitions of compliance please see www.vishay.com/doc?99912 dimensions in millimeters ( 0.25 mm) recommended soldering areas ts5yl ts5yj ts5yl ts5yj cruciform screwdriver slot ? 2.5, width 0.5 deep: 0.55 max. deep (center): 0.7 5 2.7 6.70 0.20 0.75 5 2.7 5.5 0.20 1.1 1.3 2 b 5.5 1.3 1.3 2.3 a c 2 1.3 2 2 2.3 b a c 4 a6 103 1 x 0.20 5 b a c 0.9 x 0.20 2.30 1 x 0.20 0.9 x 0.20 2.30 5 a b c
ts5 www.vishay.com vishay sfernice revision: 22-sep-15 2 document number: 51007 for technical questions, contact: sferpottrimmers @vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 electrical specifications resistive element cermet electrical travel 220 15 resistance range 10 ? to 1 m ? standard series 1 - 2 - 5 tolerance standard 10 % variation law linear power rating 0.25 w at 70 c temperature coefficient see standard resistance element data table limiting element volt age (linear law) 200 v contact resistance variation 1 % or 3 ? end resistance (typical) 0.1 % or 3 ? dielectric strength (rms) 1000 v insulation resistance 1 g ? mechanical specifications mechanical travel 270 10 operating torque (max. ncm) 1.5 end stop torque (max. ncm) 3.5 net weight (max. g) 0.15 terminals pure sn (e3) environmental specifications temperature range -55 c to +125 c climatic category 55/125/56 sealing sealed container ip67 msl level 4 soldering recommendations recommended reflow profile 2, see application note www.vishay.com/doc?52029 caution ? reflow soldering must be done within 72 h while stored under a max. temperature of 30 c, 60 % rh after opening the dry pack en velope. a (1) b (2) c (3) cw circuit diagram 0 20 40 60 100 120 140 155 70 0.05 0 0.10 0.15 0.20 0.25 ambient temperature in c power in w
ts5 www.vishay.com vishay sfernice revision: 22-sep-15 3 document number: 51007 for technical questions, contact: sferpottrimmers @vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 note ? nothing stated herein shall be construed as a guarantee of quality or durability. recommended meth od of storage dry box storage is recommended as soon as the hermetic bag has been opened to prevent moisture absorption. the following condit ions should be observed, if dry boxes are not available: ? storage temperature 10 c to 30 c ? storage humidity ? 60 % rh max. after more than 72 h under these co nditions, moisture content will be too high for reflow soldering. in case of moisture absorption, the devices will recover to the former condition by drying under the following condition: 192 h at 40 c + 5 c/- 0 c and < 5 % rh (dry air/nitrogen) or 96 h at 60 c + 5 c and < 5 % rh for all de vice containers (not suitable for reel) or 24 h at 125 c + 5 c (not suitable for reel) performances tests conditions typical values and drifts ? r t / r t (%) ? r 1-2 / r 1-2 (%) other electrical endurance 1000 h at rated power 90'/30' - ambient temp. +70 c 2 % 3 % contact res. variation: ? r < 1 % rn climatic sequence phase a dry heat 125 c phase b damp heat phase c cold -55 c phase d damp heat 5 cycles 2 % 3 % damp heat steady state temperature 40 c rh 93 % 56 days 2 % 3 % dielectric strength: 1000 v rms insulation resistance: > 10 4 m ? charge of temperature -55 c to +125 c 5 cycles 1 % ? v 1-2 / ? v 1-3 ? 2 % mechanical endurance 100 cycles - rated power (3 % + 5 ? ) shock 50 g at 11 ms 3 successive shocks in 3 directions 1 % ? v 1-2 / ? v 1-3 ? 1 % vibration 10 hz to 55 hz 0.75 mm or 10 g during 6 h 1 % ? v 1-2 / ? v 1-3 ? 1 % standard resistance element data standard resistance values linear law typical tcr - 55 c + 125 c max. power at 70 c max. working voltage max. current through element ? w v ma ppm/c 10 0.25 1.58 158 100 20 0.25 2.24 112 50 0.25 3.54 71 100 0.25 5.00 50 200 0.25 7.07 35 500 0.25 11.2 22 1k 0.25 15.8 16 2k 0.25 22.4 11 5k 0.25 35.4 7 10k 0.25 50.0 5 20k 0.25 70.7 3.5 50k 0.25 112 2.2 100k 0.25 158 1.6 200k 0.20 200 1.0 500k 0.08 200 0.4 1m 0.04 200 0.2
ts5 www.vishay.com vishay sfernice revision: 22-sep-15 4 document number: 51007 for technical questions, contact: sferpottrimmers @vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 marking vishay trademark, ohmic value, manufacturing date the ohmic value is indicated by a 3 figure code, the first tw o are significant figures, the third one is the multiplier. ? example: 100 = 10 ?? 101 = 100 ?? 102 = 1000 ?? 503 = 50 000 ? packaging in millimeters on tape and reel of 500 pieces, code r10 (tr500) an d 2000 pieces, code r20 (tr2000) cover tape pa nel strength specificatio ns eia 481 a and cei 60286-3. drypack ? devices are packed in moisture barrier bags to prevent the produc ts from moisture absorption du ring transportation and storage. ? each bag contains a desiccant. ordering information (part number) model style ohmic value tolerance packaging special number ts5 yl yj from 10 ? to 1 m ? 504 = 500 k ? k = 10 % r10 = reel 500 pieces on request r20 = reel 2000 pieces (if applicable) given by vishay for custom design description (for information only) ts5 yl 500k 10 % tr e3 model style value tolerance special packaging lead (pb)-free related documents application notes potentiometers and trimmers www.vishay.com/doc?51001 guidelines for vishay sfernice resistive and inductive components www.vishay.com/doc?52029 3 slots - width 2 to 120 - ? ext. 23 ? 12.7 ? 178 2 0.3 3.2 2 ? 70 13 8 5.2 7.6 12 5.5 1.75 4 2 ? 1.5 10 50 k 4r l s5 y t
legal disclaimer notice www.vishay.com vishay revision: 08-feb-17 1 document number: 91000 disclaimer ? all product, product specifications and data ar e subject to change with out notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, representation or guarantee regarding the suitability of th e products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product , (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all implied warranties, includ ing warranties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain types of applicatio ns are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular applic ation. it is the customers responsibility to validate tha t a particular product with the prope rties described in the product sp ecification is suitable for use in a particular application. parameters provided in datasheets and / or specifications may vary in different ap plications and perfor mance may vary over time. all operating parameters, including ty pical parameters, must be va lidated for each customer application by the customer s technical experts. product specifications do not expand or otherwise modify vishays term s and conditions of purchase, including but not limited to the warranty expressed therein. except as expressly indicated in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vishay product could result in personal injury or death. customers using or selling vishay product s not expressly indicated for use in such applications do so at their own risk. please contact authorized vishay personnel to obtain writ ten terms and conditions rega rding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is gran ted by this document or by any conduct of vishay. product names and markings noted herein may be trademarks of their respective owners. ? 2017 vishay intertechnology, inc. all rights reserved
|
