technical data green products data sheet n1693, rev. - ? china - germany - korea - singapore - united states ? ? http://www.smc-diodes.com - sales@ smc-diodes.com ? ABS2 thru abs10 ABS2 thru abs10 single phase glass passiv ated bridge rectifiers voltage range - 200 to 1000 volts current - 0.8/1.0 ampere features: ? ideal for printed circuit board ? reliable low cost construction utilizing molded plastic technique ? high temperature soldering guaranteed: 260 /10 seconds at 5 lbs., (2.3kg) tension ? small size, simple installation ? high surge current capability ? glass passivated chip junction mechanical data: ? case: molded plastic body ? terminals: plated leads solderab le per mil-std-750, method 2026 ? polarity: polarity symbols marked on case ? mounting position: any mechanical dimensions: in inches/mm abs
technical data green products data sheet n1693, rev. - ? china - germany - korea - singapore - united states ? ? http://www.smc-diodes.com - sales@ smc-diodes.com ? ABS2 thru abs10 marking diagram: where xxxxx is yywwl ABS2 = part name yy = year ww = week l = lot number cautions molding resin epoxy resin ul:94v-0 ordering information: device package shipping ABS2 thru abs10 abs (pb-free) 3000pcs / reel for information on tape and reel specifications, including part orientation and tape sizes, please refer to our tape and reel p ackaging specification.
technical data green products data sheet n1693, rev. - ? china - germany - korea - singapore - united states ? ? http://www.smc-diodes.com - sales@ smc-diodes.com ? ABS2 thru abs10 maximum ratings and electrical characteristics rating at 25c ambient temperature unless otherwise specified single phase half wave 60hz, resistive or inductive load. for capacitive load current derate by 20%. characteristic symbol ABS2 abs4 abs6 abs8 abs10 units maximum repetitive peak reverse voltage v rrm 200 400 600 800 1000 v rms reverse voltage v r(rms) 140 280 420 560 700 maximum dc blocking voltage v dc 200 400 600 800 1000 maximum average forward rectified current on glass-epoxy p.c.b.(note1) on aluminum substrate(note2) i (av) 0.8 1.0 v peak forward surge current 8.3ms single half sine-wave superimposed on rated load (jedec method) i fsm 30 a maximum instantaneous forward voltage drop per leg at 0.4a v f 0.95 v maximum dc reverse current t a = 25c at rated dc blocking voltage t a = 100c i r 5 100 a typical thermal resistance (note 3) r jl r ja 25 80 c/w operating junction and storage temperature range t j ,t stg -55 to +150 c note : 1. on glass epoxy p.c.b. mounted on 0.05x0.05''(1.3x1.3mm) pads 2. on aluminum substrate p.c.b. with on area of 0.8''x0.8''(20x20mm) mounted on 0.05x0.05''(1.3x1.3mm) solder pad 3. thermal resistance form junction to ambi ent and junction to lead mounted on p.c.b. with 0.2x0.2''(5x5mm) copper pads.
technical data green products data sheet n1693, rev. - ? china - germany - korea - singapore - united states ? ? http://www.smc-diodes.com - sales@ smc-diodes.com ? ABS2 thru abs10
technical data green products data sheet n1693, rev. - ? china - germany - korea - singapore - united states ? ? http://www.smc-diodes.com - sales@ smc-diodes.com ? ABS2 thru abs10 disclaimer: 1- the information given herein, including the specifications and dimensions, is subject to change without prior notice to impr ove product characteristics. before ordering, purchasers are advised to c ontact the smc - sangdest microelectronics (nanjing) co., ltd sale s department for the latest version of the datasheet(s). 2- in cases where extremely high reliability is required (suc h as use in nuclear power control, aerospace and aviation, traffic equipment, medical equipment , and safety equipment) , safety should be ensur ed by using semiconductor devices that feature assured safety or by means of users? fail-safe precautions or other arrangement . 3- in no event shall smc - sangdest microelectronics (nanjing) co., ltd be liable for any damages that may result from an accid ent or any other cause during operation of the user?s units according to the datasheet(s). smc - sangdest microelectronics (nanjing) c o., ltd assumes no responsibility for any intellectual property claims or any other problems that may result from applications of infor mation, products or circuits described in the datasheets. 4- in no event shall smc - sangdest microelectronics (nanjing) c o., ltd be liable for any failure in a semiconductor device or any secondary damage resulting from use at a value exceeding the absolute maximum rating. 5- no license is granted by the datasheet(s) under any patents or other rights of any third party or smc - sangdest microelectr onics (nanjing) co., ltd. 6- the datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permissio n of smc - sangdest microelectronics (nanjing) co., ltd. 7- the products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their applica tion will hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or a ny third party. when exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws a nd regulations..
|
