page 1 of 5 notes a. performance and quality attributes and conditions not expressly stated in this specifcation document are intended to be excluded and do not form a part of this specifcation document. b. electrical specifcations and performance data contained in this specifcation document are based on mini-circuits applicable established test performance criteria and measurement instructions. c. the parts covered by this specifcation document are subject to mini-circuits standard limited warranty and terms and conditions (collectively, standard terms); purchasers of this part are entitled to the rights and benefts contained therein. for a full statement of the standard terms and the exclusive rights and remedies thereunder, please visit mini-circuits website at www.minicircuits.com/mclstore/terms.jsp mini-circuits ? www.minicircuits.com p.o. box 350166, brooklyn, ny 11235-0003 (718) 934-4500 sales@minicircuits.com the big deal ? ultra wideband, 0.5 to 15 ghz ? flat gain over wideband, 16.7 db with 3.3 db ? low noise fgure, 2.6 db at 8 ghz ? high ip3, up to +28 dbm product overview the PMA2-153LN+ is a phemt based wideband, low noise, fat gain mmic amplifer with a unique combination of low noise, high ip3, and fat gain over wideband making it ideal for sensitive, high- dynamic-range receiver applications. this design operates on a single 5v or 6v supply, is well matched for 50 ? and comes in a tiny, low profle package (2 x 2 mm, 8 lead mclp), accommodating dense circuit board layouts. feature advantages low noise ? 2.2 db at 2 ghz ? 2.6 db at 8 ghz enables lower system noise fgure performance. high ip3 ? +27.7 dbm at 2 ghz ? +26.8 dbm at 8 ghz combination of low noise and high ip3 makes this mmic amplifer ideal for use in low noise receiver front end (rfe) as it gives the user advantages of sensitivity and two- tone im performance at both ends of the dynamic range. low operating voltage, 5v/6v. achieves high ip3 using low voltage. 2 x 2mm 8-lead mclp package tiny footprint saves space in dense layouts while providing low inductance, repeatable transitions, and excellent thermal contact to the pcb. wide bandwidth with fat gain ? 0.1 db over 0.5 to 2 ghz ? 0.7 db over 0.5 to 6 ghz ? 1.2 db over 0.5 to 8 ghz ? 3.3 db over 0.5 to 15 ghz enables usage in applications without external gain fattening networks. key features PMA2-153LN+ 50 ? 0.5 to 15 ghz low noise, wideband, high ip3 case style: mc1631-1 monolithic amplifer
page 2 of 5 notes a. performance and quality attributes and conditions not expressly stated in this specifcation document are intended to be excluded and do not form a part of this specifcation document. b. electrical specifcations and performance data contained in this specifcation document are based on mini-circuits applicable established test performance criteria and measurement instructions. c. the parts covered by this specifcation document are subject to mini-circuits standard limited warranty and terms and conditions (collectively, standard terms); purchasers of this part are entitled to the rights and benefts contained therein. for a full statement of the standard terms and the exclusive rights and remedies thereunder, please visit mini-circuits website at www.minicircuits.com/mclstore/terms.jsp mini-circuits ? www.minicircuits.com p.o. box 350166, brooklyn, ny 11235-0003 (718) 934-4500 sales@minicircuits.com simplifed schematic & pad description function pad number description (see figure 2) rf-in 3 connects to rf input via c1 rf-out & dc-in 6 connects to rf out and v dd via bias-tee ground paddle connects to ground no connection 1,2,4,5,7,8 not used internally. connected to ground on test board case style: mc1631-1 PMA2-153LN+ product features ? low noise fgure, 2.6 db at 8 ghz ? high ip3, up to +28 dbm ? excellent gain fatness, 3.3 db over 0.5 to 15 ghz at 6v rev. a m163006 PMA2-153LN+ rs/cp 170720 general description the PMA2-153LN+ is a phemt based wideband, low noise, fat gain mmic amplifer with a unique combination of low noise, high ip3, and fat gain over wideband making it ideal for sensitive, high- dynamic-range receiver applications. this design operates on a single 5v or 6v supply, is well matched for 50 : and comes in a tiny, low profle package (2 x 2 mm, 8 lead mclp), accommodating dense circuit board layouts. typical applications ? wifi ? wlan ? umts ? lte ? wimax ? s-band radar ? c-band satcom 0.5-15 ghz low noise, wideband, high ip3 monolithic amplifer +rohs compliant the +suffix identifies rohs compliance. see our web site for rohs compliance methodologies and qualifications
page 3 of 5 notes a. performance and quality attributes and conditions not expressly stated in this specifcation document are intended to be excluded and do not form a part of this specifcation document. b. electrical specifcations and performance data contained in this specifcation document are based on mini-circuits applicable established test performance criteria and measurement instructions. c. the parts covered by this specifcation document are subject to mini-circuits standard limited warranty and terms and conditions (collectively, standard terms); purchasers of this part are entitled to the rights and benefts contained therein. for a full statement of the standard terms and the exclusive rights and remedies thereunder, please visit mini-circuits website at www.minicircuits.com/mclstore/terms.jsp mini-circuits ? www.minicircuits.com p.o. box 350166, brooklyn, ny 11235-0003 (718) 934-4500 sales@minicircuits.com absolute maximum ratings 4 parameter ratings operating temperature (ground lead) -40c to 85c storage temperature -65c to 150c junction temperature 160 total power dissipation 0.7w input power (cw), vd=5,6v 5 +20 dbm (0.7 - 7.75 ghz) 5 minutes max. +22 dbm (7.75 - 15 ghz) 5 minutes max. +8 dbm (continuous) dc voltage 7v 4. permanent damage may occur if any of these limits are exceeded. electrical maximum ratings are not intended for continuous normal operation. 5. measured on mini-circuits test board, tb-mb014-1 PMA2-153LN+ 1. measured on mini-circuits characterization test board mb014-1. see characterization test circuit (fig. 1) 2. current increases at p1db up to 10ma typ. at 5volts v dd 3. (current at 85c - current at -45c)/130 electrical specifcations 1 at 25c, unless noted parameter condition (ghz) v dd =6.0 v dd =5.0 units min. typ. max. min. typ. max. frequency range 0.5 15.0 0.5 15.0 ghz noise figure 0.5 2.3 2.2 db 2.0 2.3 2.1 8.0 2.6 2.5 10.0 2.8 2.7 15.0 3.8 3.7 gain 0.5 19.0 18.1 db 2.0 18.9 18.0 8.0 15.1 16.8 18.4 14.4 16.0 17.6 10.0 16.0 15.3 15.0 12.5 11.7 input return loss 0.5 9.3 8.4 db 2.0 10.2 9.2 8.0 9.7 9.1 10.0 8.7 8.2 15.0 4.2 4.2 output return loss 0.5 13.5 11.7 db 2.0 13.0 11.6 8.0 22.9 21.0 10.0 17.4 17.1 15.0 6.9 6.2 output power at 1db compression 2 0.5 15.3 14.2 dbm 2.0 15.2 14.0 8.0 14.8 13.2 10.0 14.8 13.2 15.0 11.2 10.5 output ip3 0.5 27.3 24.7 dbm 2.0 27.7 24.9 8.0 26.8 24.4 10.0 26.7 24.7 15.0 24.0 21.9 device operating voltage (v dd ) 6.0 5.0 v device operating current (i dd ) 66 85 50 ma device current variation vs. temperature 3 -5.3 12.5 a/c device current variation vs. voltage 0.0187 0.0187 ma/mv thermal resistance, junction-to-ground 107 107 c/w monolithic e-phemt mmic amplifer
page 4 of 5 notes a. performance and quality attributes and conditions not expressly stated in this specifcation document are intended to be excluded and do not form a part of this specifcation document. b. electrical specifcations and performance data contained in this specifcation document are based on mini-circuits applicable established test performance criteria and measurement instructions. c. the parts covered by this specifcation document are subject to mini-circuits standard limited warranty and terms and conditions (collectively, standard terms); purchasers of this part are entitled to the rights and benefts contained therein. for a full statement of the standard terms and the exclusive rights and remedies thereunder, please visit mini-circuits website at www.minicircuits.com/mclstore/terms.jsp mini-circuits ? www.minicircuits.com p.o. box 350166, brooklyn, ny 11235-0003 (718) 934-4500 sales@minicircuits.com PMA2-153LN+ product marking pma2 153 black body model family designation index over pin 1 characterization test circuit fig 1. application and characterization circuit note: this block diagram is used for characterization. (dut soldered on mini-circuits characterization test board tb-mb014-1) gain, return loss, output power at 1db compression (p1 db), output ip3 (oip3) and noise fgure measured using agilents n5242a pna-x microwave network analyzer. conditions: 1. gain and return loss: pin= -25dbm 2. output ip3 (oip3): two tones, spaced 1 mhz apart, 0 dbm/tone at output. recommended application circuit fig 2. test board (tb-928+) includes case, connectors and components soldered to pcb. (tb-928+ is a 3-layer pcb. see tb-928+ drawing.) monolithic e-phemt mmic amplifer
page 5 of 5 notes a. performance and quality attributes and conditions not expressly stated in this specifcation document are intended to be excluded and do not form a part of this specifcation document. b. electrical specifcations and performance data contained in this specifcation document are based on mini-circuits applicable established test performance criteria and measurement instructions. c. the parts covered by this specifcation document are subject to mini-circuits standard limited warranty and terms and conditions (collectively, standard terms); purchasers of this part are entitled to the rights and benefts contained therein. for a full statement of the standard terms and the exclusive rights and remedies thereunder, please visit mini-circuits website at www.minicircuits.com/mclstore/terms.jsp mini-circuits ? www.minicircuits.com p.o. box 350166, brooklyn, ny 11235-0003 (718) 934-4500 sales@minicircuits.com PMA2-153LN+ esd rating human body model (hbm): class 1a (250 to <500v) in accordance with ansi/esd stm 5.1 - 2001 msl rating moisture sensitivity: msl1 in accordance with ipc/jedec j-std-020d performance data data table swept graphs s-parameter (s2p files) data set (.zip fle) case style mc1631-1 plastic package, exposed paddle, lead fnish: tin silver over nickel tape & reel f66 standard quantities available on reel 7 reels with 20, 50, 100, 200, 500,1k or 2k devices suggested layout for pcb design pl-496 evaluation board tb-928+ environmental ratings env08t1 additional detailed technical information additional information is available on our dash board. to access this information click here msl test flow chart additional notes a. performance and quality attributes and conditions not expressly stated in this specifcation document are intended to be excluded and do not form a part of this specifcation document. b. electrical specifcations and performance data contained in this specifcation document are based on mini-circuits applicable established test performance criteria and measurement instructions. c. the parts covered by this specifcation document are subject to mini-circuits standard limited warranty and terms and conditions (collectively, standard terms); purchasers of this part are entitled to the rights and benefts contained therein. for a full statement of the standard terms and the exclusive rights and remedies thereunder, please visit mini-circuits website at www.minicircuits.com/mclstore/terms.jsp visual inspection electrical test sam analysis refow 3 cycles, 260c soak 85c/85rh 168 hours bake at 125c, 24 hours visual inspection electrical test sam analysis start finish monolithic e-phemt mmic amplifer
|
