powerdi are registered trademarks of diodes incorporated. sbrt20u50slpq document number: ds36830 rev. 2 - 2 1 of 5 www.diodes.com march 2014 ? diodes incorporated sbrt20u50slpq anode pins ? note: all four anode pins must ? be electrically connected ? at the printed circuit board. ? bottomside heat sink ? 20a trenchsbr trench super barrier rectifier powerdi ? 5060 product summary v rrm (v) i o (a) v f (max) (v) @ +25c i r(max) (ma) @ +25c 50 20 0.5 0.5 description and applications packaged in the compact thermally efficient powerdi5060-8 package, the sbrt20u50slpq provides very low v f and excellent reverse leakage stability at high tem peratures. it is ideal for use as a rectifier, freewheel diode or blocking diode in: ? automotive applications features and benefits ? patented trench sbr technolog y provides superior avalanche capability versus schottky di odes, ensuring more rugged and reliable end applications. ? reduced ultra-low forward voltage drop (v f ); better efficiency and cooler operation. ? reduced high temperature reverse leakage; increased reliability against thermal runaway failure in high temperature operation. ? less than 1.1mm package profile ? ideal for thin applications . ? lead-free finish; rohs compliant (notes 1 & 2) ? halogen and antimony free ?green? device (note 3) ? qualified to aec-q101 standards for high reliability ? ppap capable (note 4) mechanical data ? case: powerdi5060-8 ? case material: molded plasti c, ?green? molding compound. ul flammability classification rating 94v-0 ? moisture sensitivity: level 1 per j-std-020 ? terminals: finish - matte ti n annealed over copper leadframe. solderable per mil-std-202, method 208 ? polarity: see below ? weight: 0.097 grams (approximate) top view bottom view ordering information (note 5) part number compliance case packaging SBRT20U50SLPQ-13 automotive powerdi5060-8 2500/tape & reel notes: 1. eu directive 2002/95/ec (rohs) & 2011/65/eu (roh s 2) compliant. all applicable rohs exemptions applied. 2. see http://www.diodes.com/quality/lead_free.html for more in formation about diodes incorporated?s definitions of halogen- a nd antimony-free, ?green? and lead-free. 3. halogen- and antimony-free ?green? products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total br + cl) and <1000ppm antimony compounds. 4. automotive products are aec-q101 qualified and are ppap capabl e. automotive, aec-q101 and standard products are electrically and thermally the same, except where specified. for more in formation, please refer to http://www.diodes.com/quality/ product_compliance_definition s/. 5. for packaging details, go to our website at http://www.diodes.com/p roducts/packages.html. marking information top view bottom view powerdi5060-8 a a a a c c c c pin1 sbrt20u50 = product type marking code yyww = date code marking yy = last two digits of year (ex: 14 = 2014) ww = week (01-53) sbrt20u50 yyww ? green
powerdi are registered trademarks of diodes incorporated. sbrt20u50slpq document number: ds36830 rev. 2 - 2 2 of 5 www.diodes.com march 2014 ? diodes incorporated sbrt20u50slpq new product maximum ratings (@t a = +25c, unless otherwise specified.) single phase, half wave, 60hz, re sistive or inductive load. for capacitance load, derate current by 20%. characteristic symbol value unit peak repetitive reverse voltage working peak reverse voltage dc blocking voltage v rrm v rwm v rm 50 v rms reverse voltage v r(rms) 35 v average rectified output current i o 20 a non-repetitive peak forward surge current 8.3ms single half sine-wave superimposed on rated load i fsm 200 a non-repetitive avalanche energy (t j = +25c, i as = 14.5a, l = 8.5mh) e as 640 mj repetitive peak avalanche energy (1s, +25c) p arm 40000 w thermal characteristics characteristic symbol value unit typical thermal resistance junction to ambient (note 6) r ja 12 c/w operating temperature range t j -55 to +150 c storage temperature range t stg -55 to +175 c electrical characteristics (@t a = +25c, unless otherwise specified.) characteristic symbol min typ max unit test condition forward voltage drop (note 7) v f ? ? 0.375 0.445 0.420 0.500 v i f = 10a, t j = +25c i f = 20a, t j = +25c leakage current (note 7) i r ? ? 0.144 ? 0.500 100 ma v r = 50v, t j = +25c v r = 50v, t j = +125c total capacitance c t ? 350 ? pf v r = 50v, f = 1mhz reverse recovery time t rr ? 48 ? ns i f =0.5a, i r =1.0a, i rr =0.25a, rg1 notes: 6. device mounted on al substrate pcb (30mm* 30mm) with additional heat sink (al 48mm*35mm*80mm) 7. short duration pulse test used to minimize self-heating effect. i average forward current (a) figure 1 forward power dissipation f(av) p , p o we r dissi p a t i o n (w) d 0 2 4 6 8 10 12 0 5 10 15 20 25 note 5 v , instantaneous forward voltage (v) f figure 2 typical forward characteristics i, ins t an t ane o u s f o r wa r d c u r r en t (a) f t = -55c a t = 85c a t = 125c a t = 150c a 0.0001 0.001 0.01 0.1 1 10 100 0 100 200 300 400 500 t = 25c a
powerdi are registered trademarks of diodes incorporated. sbrt20u50slpq document number: ds36830 rev. 2 - 2 3 of 5 www.diodes.com march 2014 ? diodes incorporated sbrt20u50slpq new product i , ins t an t ane o u s r eve r se c u r r en t (a) r v , instantaneous reverse voltage (v) r figure 3 typical reverse characteristics 0.1 1 10 100 1000 10000 100000 1000000 0 5 10 15 20 25 30 35 40 45 50 t = -55c a t = 85c a t = 125c a t = 150c a t = 25c a v , dc reverse voltage (v) r figure 4 total capacitance vs. reverse voltage c , t o t al c a p a c i t an c e (pf) t 100 1000 10000 100000 0 5 10 15 20 25 30 35 40 45 50 f = 1mhz p , maxim u m avala n c h e p o we r (w) arm t , pulse duration (s) p figure 5 maximum avalanche power curve 100 1000 10000 100000 0.0 0.1 1.0 10 100 1000 10000 t1, pulse duration time (sec) figure 6 transient thermal resistance r(t), t r a n sie n t t h e r mal r esista n c e d = 0.5 d = 0.7 d = 0.9 d = 0.3 d = 0.1 d = 0.05 d = 0.02 d = 0.01 d = 0.005 d = single pulse r (t) = r(t) * r r = 100c/w duty cycle, d = t1/ t2 ?? ? ja ja ja 0.01 0.1 1 0.001 0.01 0.1 1 10 100 1000 10000
powerdi are registered trademarks of diodes incorporated. sbrt20u50slpq document number: ds36830 rev. 2 - 2 4 of 5 www.diodes.com march 2014 ? diodes incorporated sbrt20u50slpq new product package outline dimensions please see ap02002 at http://www.diodes.com/ datasheets/ap02002.pdf for latest version. suggested pad layout please see ap02001 at http://www.diodes.com/dat asheets/ap02001.pdf for the latest version. dimensions value (in mm) c 1.270 g 0.660 g1 0.820 x 0.610 x1 4.100 x2 0.755 x3 4.420 x4 5.610 y 1.270 y1 0.600 y2 1.020 y3 0.295 y4 1.825 y5 3.810 y6 0.180 y7 6.610 y 7 x 3 y 2 y 5 x 1 g 1 x c y 4 x g x 2 y 3 y 4 y 6 x 4 y 1 powerdi5060-8 dim min max typ a 0.90 1.10 1.00 a1 0.00 0.05 ? b 0.33 0.51 0.41 b2 0.200 0.350 0.273 b3 0.40 0.80 0.60 c 0.230 0.330 0.277 d 5.15 bsc d1 4.70 5.10 4.90 d2 3.70 4.10 3.90 d3 3.90 4.30 4.10 e 6.15 bsc e1 5.60 6.00 5.80 e2 3.28 3.68 3.48 e3 3.99 4.39 4.19 e 1.27 bsc g 0.51 0.71 0.61 k 0.51 ? ? l 0.51 0.71 0.61 l1 0.050 0.20 0.175 m 3.235 4.035 3.635 m1 1.00 1.40 1.21 10 12 11o 1 6 8 7o all dimensions in mm d1 e1 a l k m l1 d2 g e2 detail a o (4x) a1 c e d e 1 detail a b (8x) e/2 1 o (4x) m1 b2 (4x) b3 (4x) e3 d3
powerdi are registered trademarks of diodes incorporated. sbrt20u50slpq document number: ds36830 rev. 2 - 2 5 of 5 www.diodes.com march 2014 ? diodes incorporated sbrt20u50slpq new product important notice diodes incorporated makes no warranty of any kind, express or implied, with regards to this document, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose (and their equivalents under the laws of any jurisdiction). diodes incorporated and its subsidiaries rese rve the right to make modifications, enhanc ements, improvements, corrections or ot her changes without further notice to this document and any product descri bed herein. diodes incorporated does not assume any liability ari sing out of the application or use of this document or any product described herein; neither does diodes incorporated convey any license under its patent or trademark rights, nor the rights of others. any customer or user of this document or products described herein in such applica tions shall assume all risks of such use and will agree to hold diodes incorporated and all the companies whose products are represented on diodes incorporated website, harmless against all damages. diodes incorporated does not warrant or accept any liability w hatsoever in respect of any products purchased through unauthoriz ed sales channel. should customers purchase or use diodes inco rporated products for any unintended or una uthorized application, customers shall i ndemnify and hold diodes incorporated and its representativ es harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death a ssociated with such unintended or unauthorized application. products described herein may be covered by one or more united states, international or foreign patents pending. product names and markings noted herein may also be covered by one or more united states, international or foreign trademarks. this document is written in english but may be translated into multiple languages for reference. only the english version of t his document is the final and determinative format released by diodes incorporated. life support diodes incorporated products are specifically not authorized for use as critical com ponents in life support devices or systems without the express written approval of the chief executive offi cer of diodes incorporated. as used herein: a. life support devices or syst ems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when proper ly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user. b. a critical component is any component in a life support devic e or system whose failure to perform can be reasonably expect ed to cause the failure of the life support device or to affect its safety or effectiveness. customers represent that they have all necessary expertise in the safety and regulatory ramifi cations of their life support dev ices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-rel ated requirements concerning the ir products and any use of diodes incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or s ystems-related information or support that may be provided by diodes incorporated. further, customers must fully indemnify diodes incorporate d and its representatives against any damages arisi ng out of the use of diodes incorporated pr oducts in such safety-critical, life suppor t devices or systems. copyright ? 2014, diodes incorporated www.diodes.com
|
