for drawings, technical data or samples, contact your tyco electronics sales engineer, call 1-800-522-6752, or visit our website at: http://www.amp.com/fiberoptics/attenuators/attenuator_family.stm . specifications subject to change. consult tyco electronics for latest specifications. copyright 2001 by tyco electronics. all rights reserved. amp and tyco are trademarks. dimensions are in millimeters with inches in brackets. other products, logos, and company names mentioned herein may be trademarks of their respective owners. ? 1 fiber optic attenuators pdf datasheet - revised 11/01 only available as pdf at: http://www.amp.com/fiberoptics/documents/1309087.pdf singlemode build out attenuators features n a range of fixed attenuation values. standard values of 1 through 20 and 25db n upc and apc offer excellent return loss n fc, sc, st, and d4 styles n attenuation is wavelength independent and polarization insensitive n low pdl n low modal noise n long term reliability n very low reflectance n excellent price/performance n vibration resistant n single and dual window n designed to comply with bellcore gr-nwt-00910 applications n power leveling in dwdm transmission systems n test and measurement n power attenuation at the receiver available collateral n application specification 114-13055 n test reports qualifying product to bellcore 910 n customer drawings customizable features n attenuation tolerance n pc and spc configurations n attenuation values in 1db increments n labeling n kitting/packaging n wavelength dependent loss n reflectance n pass band tyco electronics? high performance build out attenuators utilize a unique all-fiber construction to absorb the optical signal. by employing a tyco electronics? technology, the design minimizes reflectance, attenuation tolerance and pdl while maximizing reliability, environmental stability, and power handling. there are no filters, air gaps, or core mismatches. specifications attenuation values ? 1-20db and 25 db (fixed) reflectance ? <-45db, -50, -55 and -60db for pc, spc, upc and apc polish respectively operating temperature ? -40c to +75c vibration resistance ? <0.1 x attenuation
fiber optic attenuators pdf datasheet - revised 11/01 only available as pdf at: http://www.amp.com/fiberoptics/documents/1309087.pdf for drawings, technical data or samples, contact your tyco electronics sales engineer, call 1-800-522-6752, or visit our website at: http://www.amp.com/fiberoptics/attenuators/attenuator_family.stm . specifications subject to change. consult tyco electronics for latest specifications. copyright 2001 by tyco electronics. all rights reserved. amp and tyco are trademarks. dimensions in millimeters with inches in brackets. other products, logos, and company names mentioned herein may be trademarks of their respective owners. ? 2 dual window attenuators part bandpass numbers 1310/1550nm 25nm attenuation sc/upc (db) r [ -55 db 1 1- 209943-1 2 1- 209943-2 3 1- 209943-3 4 1- 209943-4 5 1- 209943-5 6 1- 209943-6 7 1- 209943-7 8 1- 209943-8 9 1- 209943-9 10 1-209943-0 11 1-209943-1 12 1-209943-2 13 1-209943-3 14 1-209943-4 15 1-209943-5 16 1-209943-6 17 1-209943-7 18 1-209943-8 19 1-209943-9 20 2-209943-0 25 2-209943-5 bellcore bandpass attenuators part bandpass 1260-1360nm numbers & 1430-1580nm attenuation sc/upc (db) r [ -55 db 1 1- 209250-1 2 1- 209250-2 3 1- 209250-3 4 1- 209250-4 5 1- 209250-5 6 1- 209250-6 7 1- 209250-7 8 1- 209250-8 9 1- 209250-9 10 1-209250-0 11 1-209250-1 12 1-209250-2 13 1-209250-3 14 1-209250-4 15 1-209250-5 16 1-209250-6 17 1-209250-7 18 1-209250-8 19 1-209250-9 20 2-209250-0 25 2-209250-5 dual window and bellcore bandpass singlemode sc attenuators, build out style, fixed value sc/apc (8) dual window attenuators part bandpass numbers 1310/1550nm 25nm attenuation sc/apc (db) r [ -60 db 1 1- 209597-1 2 1- 209597-2 3 1- 209597-3 4 1- 209597-4 5 1- 209597-5 6 1- 209597-6 7 1- 209597-7 8 1- 209597-8 9 1- 209597-9 10 1-209597-0 11 1-209597-1 12 1-209597-2 13 1-209597-3 14 1-209597-4 15 1-209597-5 16 1-209597-6 17 1-209597-7 18 1-209597-8 19 1-209597-9 20 2-209597-0 25 2-209597-5 bellcore bandpass attenuators part bandpass numbers 1260-1360nm & 1430-1580nm attenuation sc/apc (8) (db) r [ -60 db 1 1- 417021-1 2 1- 417021-2 3 1- 417021-3 4 1- 417021-4 5 1- 417021-5 6 1- 417021-6 7 1- 417021-7 8 1- 417021-8 9 1- 417021-9 10 1-417021-0 11 1-417021-1 12 1-417021-2 13 1-417021-3 14 1-417021-4 15 1-417021-5 16 1-417021-6 17 1-417021-7 18 1-417021-8 19 1-417021-9 20 2-417021-0 25 2-417021-5 note: attenuation tolerance, ambient --- 5 db: .10 x nominal attenuation value < 5 db: 0.50 db note: attenuation tolerance, ambient --- - 5 db: .15 x nominal attenuation value < 5 db: 0.75 db note: attenuation tolerance, ambient --- 5 db: 6 .10 x nominal attenuation value < 5 db: 6 0.50 db note: attenuation tolerance, ambient --- 5 db: 6 .15 x nominal attenuation value < 5 db: 6 0.75 db r=reflectance note: additional attenuation values available upon request. r=reflectance note: additional attenuation values available upon request. *9 apc available (417496-x) singlemode sc attenuators, build out style fixed value
for drawings, technical data or samples, contact your tyco electronics sales engineer, call 1-800-522-6752, or visit our website at: http://www.amp.com/fiberoptics/attenuators/attenuator_family.stm . specifications subject to change. consult tyco electronics for latest specifications. copyright 2001 by tyco electronics. all rights reserved. amp and tyco are trademarks. dimensions are in millimeters with inches in brackets. other products, logos, and company names mentioned herein may be trademarks of their respective owners. ? 3 fiber optic attenuators pdf datasheet - revised 11/01 only available as pdf at: http://www.amp.com/fiberoptics/documents/1309087.pdf dual window attenuators part bandpass numbers 1310/1550nm 25nm attenuation fc/upc (db) r [ -55 db 1 1- 209948-1 2 1- 209948-2 3 1- 209948-3 4 1- 209948-4 5 1- 209948-5 6 1- 209948-6 7 1- 209948-7 8 1- 209948-8 9 1- 209948-9 10 1-209948-0 11 1-209948-1 12 1-209948-2 13 1-209948-3 14 1-209948-4 15 1-209948-5 16 1-209948-6 17 1-209948-7 18 1-209948-8 19 1-209948-9 20 2-209948-0 25 2-209948-5 bellcore bandpass attenuators part bandpass 1260-1360nm numbers & 1430-1580nm attenuation fc/upc (db) r [ -55 db 1 1- 209285-1 2 1- 209285-2 3 1- 209285-3 4 1- 209285-4 5 1- 209285-5 6 1- 209285-6 7 1- 209285-7 8 1- 209285-8 9 1- 209285-9 10 1-209285-0 11 1-209285-1 12 1-209285-2 13 1-209285-3 14 1-209285-4 15 1-209285-5 16 1-209285-6 17 1-209285-7 18 1-209285-8 19 1-209285-9 20 2-209285-0 25 2-209285-5 dual window and bellcore bandpass singlemode fc attenuators, build out style fixed value fc/apc (8) dual window attenuators part bandpass numbers 1310/1550nm 25nm attenuation fc/apc (db) r [ -60 db 1 1- 209845-1 2 1- 209845-2 3 1- 209845-3 4 1- 209845-4 5 1- 209845-5 6 1- 209845-6 7 1- 209845-7 8 1- 209845-8 9 1- 209845-9 10 1-209845-0 11 1-209845-1 12 1-209845-2 13 1-209845-3 14 1-209845-4 15 1-209845-5 16 1-209845-6 17 1-209845-7 18 1-209845-8 19 1-209845-9 20 2-209845-0 25 2-209845-5 note: attenuation tolerance, ambient --- 5 db: 6 .10 x nominal attenuation value < 5 db: 6 0.50 db note: attenuation tolerance, ambient --- 5 db: 6 .15 x nominal attenuation value < 5 db: 6 0.75 db note: attenuation tolerance, ambient --- 5 db: 6 .10 x nominal attenuation value < 5 db: 6 0.50 db r=reflectance note: additional attenuation values available upon request. r=reflectance note: additional attenuation values available upon request. singlemode fc attenuators, build out style fixed value
fiber optic attenuators pdf datasheet -revised 11/01 only available as pdf at: http://www.amp.com/fiberoptics/documents/1309087.pdf copyright 2001 by tyco electronics. all rights reserved. amp and tyco are trademarks. dimensions are in millimeters with inches in brackets. other products, logos, and company names mentioned herein may be trademarks of their respective owners. ? 4 for drawings, technical data or samples, contact your tyco electronics sales engineer, call 1-800-522-6752, or visit our website at: http://www.amp.com/fiberoptics/attenuators/attenuator_family.stm . specifications subject to change. consult tyco electronics for latest specifications. d4 attenuator dual window attenuators part bandpass numbers 1310/1550nm 25nm attenuation d4/pc (db) r [ -45 db 5 1- 209570-5 10 1-209570-0 15 1-209570-5 20 2-209570-0 singlemode d4 attenuators, build out style fixed value note: attenuation tolerance, ambient --- 5 db: 6 .15 x nominal attenuation value < 5 db: 6 0.75 db r=reflectance note: additional attenuation values available upon request.
copyright 2001 by tyco electronics. all rights reserved. amp and tyco are trademarks. dimensions are in millimeters with inches in brackets. other products, logos, and company names mentioned herein may be trademarks of their respective owners. ? 5 fiber optic attenuators pdf datasheet - revised 11/01 only available as pdf at: http://www.amp.com/fiberoptics/documents/1309087.pdf for drawings, technical data or samples, contact your tyco electronics sales engineer, call 1-800-522-6752, or visit our website at: http://www.amp.com/fiberoptics/attenuators/attenuator_family.stm . specifications subject to change. consult tyco electronics for latest specifications. variable optical attenuators features n repeatable, variable attenuation from 2 to 40db n <-65db reflectance (unconnectorized ) n slim design allows dense mounting with easy access to adjustment screw n available with standard connector types or unterminated n polarization insensitive n low modal noise n long-term reliability applications n test and measurement n power attenuation at the receiver n power leveling in dwdm transmission systems available collateral n customer drawings customizable features n lead lengths n termination types, including lc, mu, sc, st, fc the tyco electronics? variable optical attenuator achieves high reliability with a specially processed fiber that is conveniently adjusted to varying radii by the user. cladding modes are well controlled by a specially processed fiber. specifications minimum attenuation ? < 2db maximum attenuation ? 3 40db operational wavelength ? 1250-1580nm reflectance ? -65db unconnectorized operating temperature ? -40c to +75c vibration resistance ? < 0.15 x attenuation setting adjustment resolution ? continuously adjustable singlemode variable attenuators fiber conn type part number lead length none 107059-1 1.2 meters fc/pc 107059-2 1.0 meter sc/pc 107059-5 1.0 meter st/pc 107059-6 1.0 meter fc/spc 1-107059-2 1.0 meter sc/spc 1-107059-5 1.0 meter fc/apc 209544-1 1.0 meter fc/upc 209544-3 1.0 meter sc/apc 209544-5 1.0 meter sc/upc 209544-6 1.0 meter sc/apc 3-209544-5 3.0 meters sc/upc 3-209544-6 3.0 meters sc/apc sc/upc 3-209544-7 3.0 meters connector polish polish back reflection pc -45 db spc -50 db upc -55 db apc -65 db
fiber optic attenuators pdf datasheet - revised 11/01 only available as pdf at: http://www.amp.com/fiberoptics/documents/1309087.pdf copyright 2001 by tyco electronics. all rights reserved. amp and tyco are trademarks. dimensions are in millimeters with inches in brackets. other products, logos, and company names mentioned herein may be trademarks of their respective owners. ? 6 for drawings, technical data or samples, contact your tyco electronics sales engineer, call 1-800-522-6752, or visit our website at: http://www.amp.com/fiberoptics/attenuators/attenuator_family.stm . specifications subject to change. consult tyco electronics for latest specifications. in line attenuators product facts n a range of fixed attenuation values. standard values of 1 through 20, and 25 db n upc and apc offer excellent return loss n attenuation is wavelength independent and polarization insensitive n low pdl n low modal noise n long term reliability n <-60db reflectance (unconnectorized) n low cost n vibration resistant n single and dual window n designed to comply with bellcore gr-nwt-00910 applications n power leveling in dwdm transmission systems n test and measurement n power attenuation at the receiver available collateral n product designed to meet bellcore 910 n customer drawings customizable features n lead lengths n connectorized types, including lc, mu, sc, st, and fc n available in heavy duty, medium duty, and light duty tyco electronics? high performance in line attenuators utilize a unique all fiber construction to absorb the optical signal. by employing a tyco electronics? technology, the design minimizes reflectance, attenuation tolerance and pdl while maximizing reliability, envi - ronmental stability, and power handling. there are no filters, air gaps, or core mismatches. specifications attenuation values ? 1-20db and 25 db (fixed) reflectance ? <-45db, -50, -55 and -60db for pc, spc, upc and apc polish respectively operating temperature ? -40c to +75c vibration resistance ? <0.1 x attenuation
for drawings, technical data or samples, contact your tyco electronics sales engineer, call 1-800-522-6752, or visit our website at: http://www.amp.com/fiberoptics/attenuators/attenuator_family.stm . specifications subject to change. consult tyco electronics for latest specifications. copyright 2001 by tyco electronics. all rights reserved. amp and tyco are trademarks. dimensions are in millimeters with inches in brackets. other products, logos, and company names mentioned herein may be trademarks of their respective owners. ? 7 fiber optic attenuators pdf datasheet - revised 11/01 only available as pdf at: http://www.amp.com/fiberoptics/documents/1309087.pdf dual window in line attenuators part bandpass numbers 1310/1550nm 25nm attenuation (db) r [ -60 db 1 417277-1 2 417277-2 3 417277-3 4 417277-4 5 417277-5 6 417277-6 7 417277-7 8 417277-8 9 417277-9 10 1-417277-0 11 1-417277-1 12 1-417277-2 13 1-417277-3 14 1-417277-4 15 1-417277-5 16 1-417277-6 17 1-417277-7 18 1-417277-8 19 1-417277-9 20 2-417277-0 25 2-417277-5 note: attenuation tolerance, ambient, 25o c unconnectorized--- 5 db: 6 .10 x nominal attenuation value < 5 db: 6 0.50 db dual window in line attenuators part bandpass numbers 1310/1550nm 25nm attenuation (db) r [ -60 db 1 1321273-1 2 1321273-2 3 1321273-3 4 1321273-4 5 1321273-5 6 1321273-6 7 1321273-7 8 1321273-8 9 1321273-9 10 1-1321273-0 11 1-1321273-1 12 1-1321273-2 13 1-1321273-3 14 1-1321273-4 15 1-1321273-5 16 1-1321273-6 17 1-1321273-7 18 1-1321273-8 19 1-1321273-9 20 2-1321273-0 25 2-1321273-5 r=reflectance note: connectorization available upon request. r=reflectance note: connectorization available upon request. singlemode in line attenuators, heavy duty fixed value singlemode in line attenuators, medium duty fixed value note: attenuation tolerance, ambient, 25o c unconnectorized--- 5 db: 6 .10 x nominal attenuation value < 5 db: 6 0.50 db
fiber optic attenuators pdf datasheet - revised 11/01 only available as pdf at: http://www.amp.com/fiberoptics/documents/1309087.pdf copyright 2001 by tyco electronics. all rights reserved. amp and tyco are trademarks. dimensions are in millimeters with inches in brackets. other products, logos, and company names mentioned herein may be trademarks of their respective owners. ? 8 for drawings, technical data or samples, contact your tyco electronics sales engineer, call 1-800-522-6752, or visit our website at: http://www.amp.com/fiberoptics/attenuators/attenuator_family.stm . specifications subject to change. consult tyco electronics for latest specifications. loopback attenuators features n fixed attenuation values of 0 to 14 db. other attenuation values available n simulates fddi cable plant budget n compact package n mechanically and environmentally stable n wavelength independent applications n test an fddi station n attenuate signal at cross-connect panel n simulate system optical budget n shipping cover for transceiver modules tyco electronics? loopback attenuators utilize a unique all-fiber mechanism to cause a fixed attenuation of an optical signal. there are no filters, air-gaps, or core mis- matches . specifications various attenuation values ? 0-14 db (fixed) (others available upon request) operational wavelengths ? 850, 1310, 1550nm operating temperature ? -40 c to +75 c weight ? <1 oz. part operating wavelength numbers 600-1600nm tested @ 1310nm attenuation fiber size (db) 62.5/125 0 417338-1 3 417338-3 6 417338-6 9 417338-9 11 1-417338-1 14 1-417338-4 note: attenuation tolerance, ambient: = 6 15% except 0 db = + 0.6db 3 db = 6 0.6db 6 db = 6 1.0db part operating wavelength numbers 600-1600nm tested @850 nm attenuation fiber size (db) 62.5/125 0 1- 417355-1 5 1- 417355-5 6 1- 417355-6 note: attenuation tolerance, ambient: 0 db = + 0.6db 5 db = 6 0.75db 6 db = 6 1.0db tyco electronic?s fixed value attenuators use a patented fused fiber technology that relies on the natural physical property of evanescent coupling to create the desired attenuation level. 1309087-11/01
|
