features 4 pin sip and 8 pin dil package. high insulation 3000vdc. high efficiency up to 85%. unregulated output types. internal smd construction no external component required operating temperature:-40 to +85 industry standard pinout dc-dc converter 13D1 series 1watt 3kv isolated single output sip4 & dil8 specifications typical at ta=25c, nominal input vo ltage and rated output current unless otherwise specified part number output voltage output current efficiency package style vdc ma %typ x 13D1-xxs03nx 3.3 303 70 1/2/3/4 13D1-xxs05nx 5 200 70 1/2/3/4 13D1-xxs09nx 9 112 75 1/2/3/4 13D1-xxs12nx 12 84 78 1/2/3/4 13D1-xxs15nx 15 67 80 2/3/4 13D1-xxs24nx 24 42 82 2/3/4 yuan dean scientific yuan dean scientific co.,ltd rev:1 2018/10/02 1 3 d 1 series temperature derating graph input specifications parameters conditions min typ max units voltage tolerance vo,io nom 10 % filter capacitor 100 75 50 25 0 outpu t power(%) -40 85 100 ambient temperature( ) nature convection o ut put specifications parameters conditions min typ max units voltage tolerance 100% full load 5 % short circuit protection short term 1 sec line regulation for 1.0% of vin 1.2 % load regulation 3.3v & 5v (10% to 100% f.l) 15 % load regulation 9v.12v.15v&24v (10% to 100% f.l) 10 % ripple & noise bw=dc to 20mhz (package 1) 150 mvp-p ripple & noise bw=dc to 20mhz (package 2/3/4) 100 mvp-p transient response setting time 50% load step change 350 us note: 1.xx is input voltage:03=3.3vdc,05=05vdc,09=09vdc,12=12v dc,15=15vdc,24=24vdc. 2. vin:15vdc, vout:15vdc, using the 2 package. 3. vin:24vdc, vout:24vdc, using the 3 package. 4. the input voltage increases, there will be an incre ase in efficiency.
general specifications parameters conditions min typ max units isolation resistance 500vdc 1000 m switching frequency full load, nominal input 100 khz operating temperature -40 +85 humidity non condensing 95 % cooling free air convection case material dap mtbf mil-hdbk-217f @25 3500000 hours weight package 1/2/3/4 1.1/1.5/1.9/1.9 g dimensions package 1 11.50x6.00x7.5 mm dimensions package 2 11.50x6.00x10.0 mm dimensions package 3 11.50x7.50x10.0 mm dimensions package 4 12.7x10.16x7.50 mm 1 3 d 1 series tolerance envelope graph yuan dean scientific co.,ltd rev:1 2018/10/02 markings and d imensions pin connection pin 1 2 3 4 5 7 4in -vin +vin -vout +vout 8in -vin +vin +vout -vout unit : mm unless otherwise specified, all tolerances are 0.25 recommended test circuit single vin +vout gnd -vout cin cout 3.3v:cin 4.7uf,25v 5v :cin 4.7uf,25v 9v :cin 4.7uf,25v 12v:cin 2.2uf,25v 15v:cin 1uf,5 0v 24v:cin 1uf,50v 3.3v :cout 22uf,16v 5v :cout 10uf,25v 9v :cout 4.7uf,25v 12v:cout 2.2uf,25v 15v:cout 1uf,50v 24v:cout 1uf,50v 11.50 7.50 4.00 7.62 top view bottom view 1 2 3 4 printed face 0.500.05 2.54 1.25 0.250.05 1.94 6.00 output current(%) output voltage(%) 120% 110% 100% 90% 80% 70% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% 110% 120% part number 13D1 - 03 s 05 n 2 a b c d e f a:series b:input voltage c:single output d:output voltage e:unregulated(n) f:packge 11.50 10.00 4.00 7.62 top view bottom view 1 2 3 4 printed face 0.500.05 2.54 1.25 0.250.05 1.94 6.00 11.50 10.00 4.00 7.62 top view bottom view 1 2 3 4 printed face 0.500.05 2.54 1.25 0.250.05 1.94 7.50 top view bottom view 1 4 5 7 12.70 10.16 7.50 4.00 7.62 7.62 o0.500.05 5.08 0.500.05 1 2 3 4
|