View M170EN07_9105153.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

(c) copyright au optronics, inc. january, 2002 all rights reserved. m 170en07 v.1 ver0.3 no reproduction and redistribution a llo w ed. a u optronics corpor a tion product specifications 17.0 sxg a co l o r tft-lcd m odu le model name: M170EN07 v.1 appro v ed b y prepared b y ddbu marketing division / au optronics croporation customer checked & appro v ed b y s pec. no.: ddpm-en07-0.2 v ersion: 1 t o t al p ages: 26 date: 2002-nov-14
(c) copyright au optronics, inc. january, 2002 all rights reserved. m 170en07 v.1 ver0.3 no reproduction and redistribution allo w ed. 1/26 pr oduct s pec ificati ons 17.0 sxg a co l o r tft-lcd m odu le m ode l name: m 170en07 v.1 ( u ) preliminar y specifications ( ) final specifications note: this specification is subject to change w ithout notice.
(c) copyright au optronics, inc. january, 2002 all rights reserved. m 170en07 v.1 ver0.3 no reproduction and redistribution allo w ed. 2/26 i contents ii record of re v ision 1.0 handling precautions 2.0 general description 2.1 displa y characteristics 2.2 functional bloc k diagra m 2.3 optical characteristics 2.4 pixel f or m at i m age 3.0 electrical characteristics 3.1 absolute maxi m u m ratings 3.2 connectors 3.3 signal pin 3.4 signal description 3.5 signal electrical characteristics 3.6 inter f ace t i m ing 3.6.1 t i m ing characteristics 3.6.2 t i m ing de f inition 3.7 power consu m ption 3.8 power on/off sequence 4.0 backlight characteristics 4.1 signal f or la m p connector 4.2 para m eter guide line f or ccfl inverter 5.0 vibration, shock and drop 5.1 vibration and shoc k 5.2 drop test 6.0 en v ironment 6.1 t e m perature and hu m idit y 6.1.1 operating conditions 6.1.2 shipping conditions 6.2 at m ospheric pressure 6.3 t her m al shoc k 7.0 reliabilit y 7.1 failure criteria 7.2 failure rate 7.2.1 usage 7.2.2 co m ponents de-rating 7.3 ccfl li f e 7.4 on/off c y cle
(c) copyright au optronics, inc. january, 2002 all rights reserved. m 170en07 v.1 ver0.3 no reproduction and redistribution allo w ed. 3/26 8.0 safet y 8.1 sharp edge require m ent 8.2 material 8.2.1 t oxicit y 8.2.2 fla mm abilit y 8.3 capacitors 8.4 ha z ardous voltage 9.0 other requirements 9.1 s m o k e f ree design 9.2 national test lab require m ent 10.0 mechanical characteristics
(c) copyright au optronics, inc. january, 2002 all rights reserved. m 170en07 v.1 ver0.3 no reproduction and redistribution allo w ed. 4/26 ii reco r d of rev isi on ve rsion and date page old description ne w description re m ar k 0.1 2002/10/04 all first edition for custo m er all 0.2 2002/10/24 6 support color: 16.2m support color: 16.7m update 0.3 2002/11/14 24,25 na mechanic dra w ing add
(c) copyright au optronics, inc. january, 2002 all rights reserved. m 170en07 v.1 ver0.3 no reproduction and redistribution allo w ed. 5/26 1.0 handling precautions 1) since f ront polari z er is easil y da m aged, pa y attention not to scratch it. 2) be sure to turn o ff po w er suppl y w hen inserting or disconnecting f ro m input connector. 3) w ipe o ff w ater drop i mm ediatel y . long contact w ith w ater m a y cause discoloration or spots. 4) w hen the panel sur f ace is soiled, w ipe it w ith absorbent cotton or other so f t cloth. 5) since the panel is m ade o f glass, it m a y brea k or crac k i f dropped or bu m ped on hard sur f ace. 6) since cmos lsi is used in this m odule, ta k e care o f static electricit y and insure hu m an earth w hen handling. 7) do not open nor m odi f y the module asse m bl y . 8) do not press the re f lector sheet at the bac k o f the m odule to an y directions. 9) at the insertion or re m oval o f the signal inter f ace connector, be sure not to rotate nor tilt the inter f ace connector o f the t f t -lcd m odule. 10) a f ter installation o f the t f t -lcd m odule into an enclosure (lcd m onitor housing, f or exa m ple), do not t w ist nor bend the t f t -lcd m odule even m o m entar y . at designing the enclosure, it should be ta k en into consideration that no bending/t w isting f orces are applied to the t f t -lcd m odule f ro m outside. other w ise the t f t -lcd m odule m a y be da m aged.
(c) copyright au optronics, inc. january, 2002 all rights reserved. m 170en07 v.1 ver0.3 no reproduction and redistribution allo w ed. 6/26 general description t his speci f i cat ion applie s to the 17.0 in ch co lor t f t -lcd module M170EN07. t he displa y supports the sxga (1280(h) x 1024(v)) screen f or m at and 16.7m colors (rgb 8-bits data). all input signals are 2 channel lvds inter f ace co m patible. t his m odule does not contain an inverter card f or bac k light. 2.1 displa y characteristics t he f ollowing ite m s are character i st i cs su mm ar y on the table under 25
(c) copyright au optronics, inc. january, 2002 all rights reserved. m 170en07 v.1 ver0.3 no reproduction and redistribution allo w ed. 7/26 2.2 functional block diagram t he f ollowing diagra m sho w s the funct ional blo c k o f the 17.0 inches color t f t -lcd module: j a e fi-x30s-hf jst bhsr-02vs-1 mating t y pe: j a e fi-x30s-h mating t y pe: sm02b-bhss-1-tb c o n n e c t o r dc/dc con v erter lvds recei v er t iming controller gamma correction t f t -lcd 1280*(3)*1024 pi x els x - driver ic y - d r i v e r i c g1 g1024 d1 d3840 in v erter dc power 4 ccfl au asic rsds t ransmitter er lvds + 5v
(c) copyright au optronics, inc. january, 2002 all rights reserved. m 170en07 v.1 ver0.3 no reproduction and redistribution allo w ed. 8/26 2.3 optical characteristics t he optical characteristics are m easured under stable conditions at 25
(c) copyright au optronics, inc. january, 2002 all rights reserved. m 170en07 v.1 ver0.3 no reproduction and redistribution allo w ed. 9/26 note 1: de f inition o f response ti m e: t he output signals o f photodetector are m easured w hen the input signals are changed f ro m tr r tr d 1 00 90 10 0 % optical response white black white note 2: brightness uni f or m it y o f these 9 points is de f ined as belo w: mini m u m lu m inance in 9 points (1-9) uni f or m it y =
(c) copyright au optronics, inc. january, 2002 all rights reserved. m 170en07 v.1 ver0.3 no reproduction and redistribution allo w ed. 10/26 note 4: unit: percentage o f di m ension o f displa y area l l a -l a r g b r g b r g b r g b r g b r g b r g b r g b 1 2 1 2 79 1 2 80 1s t l i ne 1 02 4 t h 0 gra y level 1/2 1/2 1/6 1/6 a b 1/2 1/2 1/6 1/6 2/3 1/3 1/3 2/3 a
(c) copyright au optronics, inc. january, 2002 all rights reserved. m 170en07 v.1 ver0.3 no reproduction and redistribution allo w ed. 11/26 3.0 electrical characteristics 3.1 a bsolute maximum ratings absolute m axi m u m ratings o f the m odule is as f ollo w ing: item s y mbol m in m ax unit conditions logic/lcd drive voltage vin -0.3 +5.5 [volt] select lvds data order sellvds nc nc [volt] ccfl inrush current icfll - 38 [ m a] ccfl current icfl - 7.6 [ m a] r m s operating t e m perature t op 0 +50 [ o c] note 1 operating hu m idit y hop 8 95 [%rh] note 1 storage t e m perature t s t -20 +60 [ o c] note 1 storage hu m idit y hs t 8 95 [%rh] note 1 note 1 : m aximum wet-bulb should be 39
(c) copyright au optronics, inc. january, 2002 all rights reserved. m 170en07 v.1 ver0.3 no reproduction and redistribution allo w ed. 12/26 3.2 connectors ph y sical inter f ace is described as f or the connector on m odule. t hese connectors are capable o f acco mm odating the f ollo w ing signals and w ill be f ollo w ing co m ponents. connector name / designation inter f ace connector / inter f ace card m anufacturer jae or co m patible t y pe part number fi-x30s-hf m ating housing part number fi-x30s-h or co m patible connector name / designation la m p connector / bac k light la m p m anufacturer js t t y pe part number bhsr-02vs-1 m ating t y pe part number sm02b-bhss-1- t b or co m patible 3.3 signal pin pin# signal name pin# signal name 1 rxo0- 2 rxo0+ 3 rxo1- 4 rxo1+ 5 rxo2- 6 rxo2+ 7 gnd 8 rxoc- 9 rxoc+ 10 rxo3- 11 rxo3+ 12 rxe0- 13 rxe0+ 14 gnd 15 rxe1- 16 rxe1+ 17 gnd 18 rxe2- 19 rxe2+ 20 rxec- 21 rxec+ 22 rxe3- 23 rxe3+ 24 gnd 25 nc 26 nc 27 nc 28 po w er 29 po w er 30 po w er
(c) copyright au optronics, inc. january, 2002 all rights reserved. m 170en07 v.1 ver0.3 no reproduction and redistribution allo w ed. 13/26 3.4 signal description t he m odule using a pair o f lvds receiver sn75lvds82 ( t exas instru m ents) or co m patible. lvds is a di ff erential signal technolog y f or lcd inter f ace and high speed data trans f er device. t rans m itter shall be sn75lvds83(negative edge sa m pling) or co m patible . t he f irst lvds port(rxoxxx) trans m its odd pixels w hile the second lvds port(rxexxx) trans m its even pixels. pin # signal name descrip t ion 1 rxo0- negative lvds di ff erential data input (odd data) 2 rxo0+ positive lvds di ff erential data input (odd data) 3 rxo1- negative lvds di ff erential data input (odd data) 4 rxo1+ positive lvds di ff erential data input (odd data) 5 rxo2- negative lvds di ff erential data input (odd data, h-s y nc,v-s y nc,dsp t mg) 6 rxo2+ positive lvds di ff erential data input (odd data, h-s y nc,v-s y nc,dsp t mg) 7 gnd po w er ground 8 rxoc- negative lvds di ff erential cloc k input (odd cloc k ) 9 rxoc+ positive lvds di ff erential cloc k input (odd cloc k ) 10 rxo3- negative lvds di ff erential data input (odd data) 11 rxo3+ positive lvds di ff erential data input (odd data) 12 rxe0- negative lvds di ff erential data input (even cloc k ) 13 rxe0+ positive lvds di ff erential data input (even data) 14 gnd po w er ground 15 rxe1- positive lvds di ff erential data input (even data) 16 rxe1+ negative lvds di ff erential data input (even data) 17 gnd po w er ground 18 rxe2- negative lvds di ff erential data input (even data) 19 rxe2+ positive lvds di ff erential data input (even data) 20 rxec- negative lvds di ff erential cloc k input (even cloc k ) 21 rxec+ positive lvds di ff erential cloc k input (even cloc k ) 22 rxe3- negative lvds di ff erential data input (even data) 23 rxe3+ positive lvds di ff erential data input (even data) 24 gnd po w er ground 25 nc - 26 nc - 27 nc - 28 po w er po w er 29 po w er po w er 30 po w er po w er note: input signals o f odd and even cloc k shall be the sa m e ti m ing. lvds da t a na me description dsp displa y t i m ing: w hen the signal is high, the pixel data shall be valid to be displa y ed v-s vertical s y nc: both positive and negative polarit y are acceptable h-s hori z ontal s y nc: both positive and negative polarit y are acceptable
(c) copyright au optronics, inc. january, 2002 all rights reserved. m 170en07 v.1 ver0.3 no reproduction and redistribution allo w ed. 14/26 ti lvds x " mitter sn75lvds83 module lvds signal (interface connector pin7) signal name lo w (open) d0 red0 d1 red1 d2 red2 d3 red3 d4 red4 d5 red7 d6 red5 d7 green0 d8 green1 d9 green2 d10 green6 d11 green7 d12 green3 d13 green4 d14 green5 d15 blue0 d16 blue6 d17 blue7 d18 blue1 d19 blue2 d20 blue3 d21 blue4 d22 blue5 d23 na d24 h s y nc d25 v s y nc d26 displa y t i m ing d27 red6
(c) copyright au optronics, inc. january, 2002 all rights reserved. m 170en07 v.1 ver0.3 no reproduction and redistribution allo w ed. 15/26 g0(0 ) r5(r3 ) r4(r2 ) r3(r1 ) r2(r0 ) r1(0 ) r0(0) rsv b7(b5 ) b6(b4 ) g7(g5 ) g6(g4 ) r7(r5 ) r6(r4) d e v s hs b5(b3 ) b4(b2 ) b3(b1 ) b2(b0) b1(0 ) b0(0 ) g5(g3 ) g4(g2 ) g3(g1 ) g2(g0 ) g1(0) rclkp1 rap1 rbp1 rcp1 rdp1 g0(0 ) r5(r3 ) r4(r2 ) r3(r1 ) r2(r0 ) r1(0 ) r0(0) rsv b7(b5 ) b6(b4 ) g7(g5 ) g6(g4 ) r7(r5 ) r6(r4) b5(b3 ) b4(b2 ) b3(b1 ) b2(b0) b1(0 ) b0(0 ) g5(g3 ) g4(g2 ) g3(g1 ) g2(g0 ) g1(0) rclkp2 rap2 rbp2 rcp2 rdp2 note: r/g/b data 7: m sb, r/g/b data 0:lsb o = first pixel data e = second p ixel data
(c) copyright au optronics, inc. january, 2002 all rights reserved. m 170en07 v.1 ver0.3 no reproduction and redistribution allo w ed. 16/26 3.5 signal electrical characteristics input signals shall be lo w or hi-z state w hen vin is o ff it is reco mm ended to re f er the speci f ications o f sn75lvds82dgg ( t exas instru m ents) in detail. each signal characteristics are as f ollo w s; parameter condition m in m ax unit vth di ff erential inputhigh voltage(vc m =+1.2v) 100 [ m v] vtl di ff erential input low voltage(vc m =+1.2v) -100 [ m v] 3.6 interface timings basicall y , inter f ace ti m ings described here is not actual input ti m ing o f lcd m odule but output ti m ing o f sn75lvds82dgg ( t exas instru m ents) or equivalent. 3.6.1 timing characteristics signal item s y mbol m in t yp m a x unit d t clk freq. fdc k 50 67.5 70 mh z d t clk c y cle t c k 14.2 14.8 20 ns +v-s y nc fra m e rate 1/ t v 56.25 75 77 h z +v-s y nc c y cle t v 13 13.33 17.78 m s +v-s y nc c y cle t v 1035 1066 2047 lines +v-s y nc active level t va 3 3 lines +v-s y nc v-bac k porch t vb 7 38 63 lines +v-s y nc v- f ront porch t v f 1 1 lines +dsp t mg v-line m - 1024 - lines +h-s y nc scan rate 1/ t h - 80.06 - kh z +h-s y nc c y cle t h 800 844 1023 t c k +h-s y nc active level t ha (*1) 4 56 t c k +h-s y nc bac k porch t hb (*1) 4 124 t c k +h-s y nc front porch t h f 4 24 t c k +dsp t mg displa y pixels n - 640 - t c k note: t y pical value re f er to vesa s t andard (*1) t ha+ t hb should be less than 1024 t c k.
(c) copyright au optronics, inc. january, 2002 all rights reserved. m 170en07 v.1 ver0.3 no reproduction and redistribution allo w ed. 17/26 3.6.2 timing definition 1688 dot 1 12 dot 2 48 dot 4 8 dot 1280 dot h - s ync ds p t mg 4 2h 1h 38h 3h 1024h v - s ync d s p t mg 3.7 po w er consumption input po w er speci f ications are as f ollo w s; s y mbol parameter m in t yp m ax units condition vdd logic/lcd drive voltage 5 [volt] idd vdd current t bd [ m a] pdd vdd po w er t bd [ w att] vin=5v, all blac k pattern vddrp allo w able logic/lcd drive ripple voltage 100 [ m v] p-p vddns allo w able logic/lcd drive ripple noise 100 [ m v] p-p
(c) copyright au optronics, inc. january, 2002 all rights reserved. m 170en07 v.1 ver0.3 no reproduction and redistribution allo w ed. 18/26 3.8 po w er on/off sequence vin po w er and la m p on/o ff sequence is as f ollo w s. inter f ace signals are also sho w n in the chart. signals f ro m an y s y ste m shall be hi-z state or lo w level w hen vin is o ff . 10% 1 0% 1 0% 1 0% 1 0% 9 0% 9 0% 0 m i n. 0 m i n. 1 s ec m i n. 15 m s ma x. vin l a mp on s i gnal 0 v 0 v 0 v 250 m s 0 m i n. 4.0 backlight characteristics 4.1 signal for lamp connector pin # signal name 1 la m p high voltage 2 la m p high voltage 3 no connection 4 ground 250 ms
(c) copyright au optronics, inc. january, 2002 all rights reserved. m 170en07 v.1 ver0.3 no reproduction and redistribution allo w ed. 19/26 4.2 parameter guideline for cfl in v erter s y mbol parameter m in t yp m ax units condition (l63) w hite lu m inance 200 250 - [cd/m 2 ] ( t a=25 o c) iscfl ccfl standard current 6.5 7.0 7.5 [ m a] r ms ( t a=25 o c) ircfl ccfl operation range 3.0 7.0 7.5 [ m a] r m s ( t a=25 o c) icfl ccfl inrush current - 26 34 [ m a] note 1 f cfl ccfl frequenc y 40 50 80 [kh z ] ( t a=25 o c) note 2 vicfl (0 o c) ccfl ignition voltage 1700 [volt] r m s ( t a=0 o c) note 3 vicfl (25 o c) ccfl ignition voltage 1200 [volt] r m s ( t a=25 o c) note 3 t cfl ccfl dar k start ti me 1.0 sec ( t a=25 o c) vcfl ccfl discharge voltage (re f erence) 700 860 [volt] r m s ( t a=25 o c) note 4 pcfl ccfl po w er consu m ption 19.6 25.8 [ w att] ( t a=25 o c) note 4 note 1: duration=50 [ m sec] note 2: ccfl frequenc y should be care f ull y deter m ined to avoid inter f erence bet w een inverter and t f t lcd note 3: ccfl inverter should be able to give out a po w er that has a generating capacit y o f over 1700 voltage. la m p units need 1700 voltage m ini m u m f or ignition note 4: calculator value f or re f erence (icfl vcfl=pcfl) note 5: la m p soldering m ethod is required to use hoo k soldering .
(c) copyright au optronics, inc. january, 2002 all rights reserved. m 170en07 v.1 ver0.3 no reproduction and redistribution allo w ed. 20/26 5.0 vibration, shock, and drop 5.1 vibration & shock frequenc y : 10 - 200h z s w eep: 30 minutes each axis (x, y , z) acceleration: 1.5g(10~200h z p- p) t est m ethod: a cceleration (g) 1.5 frequenc y (hz) 10~200~10 a cti v e time(min) 30 5.2 shock test spec: a cceleration (g) 50 a cti v e time 20 wa v e form hal f -sin t imes 1 direction: x , y , z 5.3 drop test pac k age test: t he drop height is 60 c m .
(c) copyright au optronics, inc. january, 2002 all rights reserved. m 170en07 v.1 ver0.3 no reproduction and redistribution allo w ed. 21/26 6.0 en v ironment t he displa y m odule w ill m eet the provision o f this speci f ication during operating condition or a f ter storage or ship m ent condition speci f ied belo w . operation at 10% be y ond the speci f ied range w ill not cause ph y sical da m age to the unit. 6.1 temperature and humidit y 6.1.1 operating conditions t he displa y m odule operates error f ree, w hen operated under the f ollo w ing conditions; t e m perature 0 0 c to 50 0 c relative hu m idit y 8% to 95% w et bulb t e m perature 39.0 0 c 6.1.2 shipping conditions t he displa y m odule operates error f ree, a f ter the f ollo w ing conditions; t e m perature -20 0 c to 60 0 c relative hu m idit y 8% to 95% w et bulb t e m perature 39.0 0 c 6.2 a tmospheric pressure t he displa y asse m bl y is capable o f being operated w ithout a ff ecting its operations over the pressure range as f ollo w ing speci f ied; pressure note maxi m u m pressure 1040hpa 0 m = sea level mini m u m pressure 674hpa 3048 m = 10.000 f eet note : non-operation attitude li m it o f this displa y m odule = 30,000 f eet. = 9145 m . 6.3 thermal shock t he displa y m odule w ill not sustain da m age a f ter being subjected to 100 c y cles o f rapid te m perature change. a c y cle o f rapid te m perature change consists o f var y ing the te m perature f ro m -20 0 c to 60 0 c, and bac k again. t hermal shock c y cle -20 0 c f or 30 m in 60 0 c f or 30 m in po w er is not applied during the test. a f ter te m perature c y cling, the unit is placed in nor m al roo m a m bient f or at least 4 hours be f ore po w ering on.
(c) copyright au optronics, inc. january, 2002 all rights reserved. m 170en07 v.1 ver0.3 no reproduction and redistribution allo w ed. 22/26 7.0 reliabilit y t his displa y m odule and the pac k aging o f that w ill co m pl y f ollo w ing standards. 7.1 failure criteria t he displa y asse m bl y w ill be considered as f ailing unit w hen it no longer m eets an y o f the require m ents stated in this speci f ication. onl y as f or m axi m u m w hite lu m inance, f ollo w ing criteria is applicable. note : m aximum w hite luminance shall be 115 cd/m 2 or more. 7.2 failure rate t he average f ailure rate o f the displa y m odule ( f ro m f irst po w er-on c y cle till 1,000 hours later) w ill not exceed 1.0%. t he average f ailure rate o f the displa y m odule f ro m 1,000 hours until 16,000 hours w ill not exceed 0.7% per 1000 hours. 7.2.1 usage t he assu m ed usage f or the above criteria is: 220 po w er-on hours per m onth 500 po w er on/o ff c y cles per m onth maxi m u m brightness setting operation to be w ithin o ff ice environ m ent (25 0 c t y pical) 7.2.2 component de-rating all the co m ponents used in this device w ill be chec k ed the load condition to m eet the f ailure rate criteria. 7.3 ccfl life t he assu m ed ccfl li f e w ill be longer than 30,000 hours, t y pical value is 40,000 hours under stable condition at 25
(c) copyright au optronics, inc. january, 2002 all rights reserved. m 170en07 v.1 ver0.3 no reproduction and redistribution allo w ed. 23/26 8.0 safet y 8.1 sharp edge requirements t here w ill be no sharp edges or co m ers on the displa y asse m bl y that could cause injur y . 8.2 materials 8.2.1 toxicit y t here w ill be no carcinogenic m aterials used an y w here in the displa y m odule. i f toxic m aterials are used, the y w ill be revie w ed and approved b y the responsible au t oxicologist. 8.2.2 flammabilit y all co m ponents including electrical co m ponents that do not m eet the f la mm abilit y grade ul94-v1 in the m odule w ill co m plete the f la mm abilit y rating exception approval process. t he printed circuit board w ill be m ade f ro m m aterial rated 94-v1 or better. t he actual ul f la mm abilit y rating w ill be printed on the printed circuit board. 8.3 capacitors i f an y polari z ed capacitors are used in the displa y asse m bl y , provisions w ill be m ade to k eep the m f ro m being inserted bac k w ards. 8.4 hazardous voltages an y point exceeding 42.4 volts m eets the require m ent o f the li m ited current circuit. t he current through a 2k
(c) copyright au optronics, inc. january, 2002 all rights reserved. m 170en07 v.1 ver0.3 no reproduction and redistribution allo w ed. 24/26 9.0 other requirements 9.1 national test lab requirement t he displa y m odule w ill satis f y all require m ents f or co m pliance to ul 1950, first edition u.s.a. in f or m ation t echnolog y equip m ent cs a c22.2 no.950- m 89 canada, in f or m ation t echnolog y equip m ent eec 950 international, in f or m ation t echnolog y equip m ent en 60 950 international, in f or m ation processing equip m ent (european nor m f or iec950) 9.2 label 9.2.1 product label
(c) copyright au optronics, inc. january, 2002 all rights reserved. m 170en07 v.1 ver0.3 no reproduction and redistribution allo w ed. 25/26 10.0 m echanical characteristics
(c) copyright au optronics, inc. january, 2002 all rights reserved. m 170en07 v.1 ver0.3 no reproduction and redistribution allo w ed. 26/26

▲Up To Search▲

Price & Availability of M170EN07

	To Download M170EN07 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .