design and specifications are each subject to change without notice. ask factory for the current technical specifications before purchase and/or use. should a safety concern arise regarding this product, please be sure to contact us immediately. conductive polymer aluminum solid capacitors f d0.05 l max. 15 min. 4 min. 19 min. f d0.5 f + C lot. no. polarity marking (?) series r. capacitance r. voltage radial lead type series : sef high voltage (35 v.dc max.) large capacitance (1000 f max.) rohs compliance, halogen free marking dimensions (not to scale) unit : mm size code f d0.5 l max. f 0.5 f d0.05 c6 6.3 6.0 2.5 0.5 e7 8.0 7.0 3.5 0.5 e12 8.0 12.0 3.5 0.6 f13 10.0 13.0 5.0 0.6 ? 1 ripple current (100 khz/ +105 c < tx < +125 c) /allowable ripple current (100 khz/ tx < +105 c), ? 2 esr (100 khz to 300 khz/+20 c) ? 3 tan (120 hz/+20 c) ? 4 after 2 minutes please refer to each page in this catarog for flow conditions and taping specifications. frequency correction factor for ripple current frequency 120 hz < f < 1 khz 1 khz < f < 10 khz 10 khz < f < 100 khz 100 khz < f < 500 khz coef? cient 0.05 0.3 0.7 1 capacitance tolerance 20 % (120 hz / + 20 c) leakage current please see the attached characteristics list dissipation factor (tan ) please see the attached characteristics list endurance +125 c, 1000 h, rated voltage applied capacitance change within 20 % of the initial value tan < 200 % of the initial limit dc leakage current within the initial limit damp heat (steady state) +60 c, 90 % to 95 %, 1000 h, no-applied voltage capacitance change within 20 % of the initial value tan < 150 % of the initial limit dc leakage current within the initial limit (after voltage processing) size code c6 e7 e12 f13 category temperature range C55 c to +125 c rated voltage range 16 v.dc to 35 v.dc rated capacitance range 22 f to 180 f 39 f to 270 f 82 f to 560 f 120 f to 1000 f features ? externals of ? gure are the reference. speci cations characteristics list series rated voltage (v.dc) rated capacitance (f) case size (mm) size code specifications part number f d l ripple ? 1 current (mar.m.s.) allowable ? 1 ripple current (mar.m.s.) esr ? 2 (m max.) tan ? 3 lc ? 4 (a) sef 16 180 6.3 6.0 c6 1040 3300 22 0.12 576 16sef180m 270 8.0 7.0 e7 1040 3300 22 0.12 864 16sef270m 560 8.0 12.0 e12 1560 4950 14 0.12 1792 16sef560m 1000 10.0 13.0 f13 1700 5400 12 0.12 3200 16sef1000m 20 120 6.3 6.0 c6 1010 3200 25 0.12 480 20SEF120M 180 8.0 7.0 e7 1010 3200 25 0.12 720 20sef180m 390 8.0 12.0 e12 1560 4950 14 0.12 1560 20sef390m 560 10.0 13.0 f13 1700 5400 12 0.12 2240 20sef560m 25 56 6.3 6.0 c6 880 2800 30 0.12 280 25sef56m 82 8.0 7.0 e7 940 3000 28 0.12 410 25sef82m 180 8.0 12.0 e12 1470 4650 16 0.12 900 25sef180m 330 10.0 13.0 f13 1580 5000 14 0.12 1650 25sef330m 35 22 6.3 6.0 c6 820 2600 35 0.12 154 35sef22m 39 8.0 7.0 e7 880 2800 30 0.12 273 35sef39m 82 8.0 12.0 e12 1260 4000 20 0.12 574 35sef82m 120 10.0 13.0 f13 1390 4400 18 0.12 840 35sef120m oct. 2016 00 downloaded from: http:///
if you want to use our products described in this onlin e catalog for applications requiring special qualities or reliability, or for applications where the failure or malfunction of the products may directly jeopardize human life or potentially caus e personal injury (e.g. aircraft and aerospace equipment, traffic and transportat ion equipment, combustion equipment, medical equipment, accident prevention, anti-crime eq uipment, and/or safety equipment), it is necessary to verify whether the specificatio ns of our products fit to such applications. please ensure that you will ask and check with our inquiry desk as to whether the specifications of our products fit to such applications use before you use our products. the quality and performance of our products as described in this online catalog only apply to our products when used in isolation. therefore, please en sure you evaluate and verify our products under the specific circumstances in which our pr oducts are assembled in your own products and in which our products will actually be used. if you use our products in equipment that requires a h igh degree of reliability, regardless of the application, it is recommended that you set up protectio n circuits and redundancy circuits in order to ensure safety of your equipment. the products and product specifications described in this online catalog are subject to change for improvement without prior notice. therefore, pleas e be sure to request and confirm the latest product specifications which explain the specifications of our products in detail, before you finalize the design of your applications, pu rchase, or use our products. the technical information in this online catalog provides example s of our products' typical operations and application circuits. we do not guarantee the non-infringement of third party's intellectual property rights and we do not grant any license, right, or interest in our intellectual property. if any of our products, product specifications and/or technical information in this online catalog is to be exported or provided to non-residents, the laws and regulations of the exporting country, especially with regard to security and ex port control, shall be observed. the switchover date for compliance with the rohs directive /reach regulations varies depending on the part number or series of our products. when you use the inventory of our products for which it is unc lear whether those products are compliant with the rohs directive/reach regulation, please se lect "sales inquiry" in the website inquiry form and contact us. we do not take any responsibility for the use of our products outside the scope of the specifications, descriptions, guidelines and precautions described in this online catalog. guidelines and precautions regarding the described in this online catalog. downloaded from: http:///
|
