design and specifications are each subject to change without notice. ask factory for the current technical specifications before purchase and/or use. should a safety concern arise regarding this product, please be sure to contact us immediately. conductive polymer aluminum solid capacitors + ? f d l p r c w h 0.2 max. lot. no. polarity marking (?) series r. capacitance r. voltage surface mount type series : svpd 125 c 2000 h guaranteed at 85 c 85 % rohs compliance, halogen free features unit : mm size code f d0.5 l +0.1 w0.2 h0.2 c0.2 r p0.2 c6 6.3 5.9 6.6 6.6 7.3 0.6 to 0.8 2.1 e7 8.0 6.9 8.3 8.3 9.0 0.6 to 0.8 3.2 f8 10.0 7.9 10.3 10.3 11.0 0.6 to 0.8 4.6 e12 8.0 11.9 8.3 8.3 9.0 0.8 to 1.1 3.2 f12 10.0 12.6 10.3 10.3 11.0 0.8 to 1.1 4.6 ?0.4 series rated voltage (v.dc) rated capacitance (f) case size (mm) size code specifications standard (reel size : f 380) f d l ripple ? 1 current (mar.m.s.) allowable ? 1 ripple current (mar.m.s.) esr ? 2 (m max.) tan ? 3 lc ? 4 (a) part number min. packaging q'ty (pcs) svpd 10 56 6.3 5.9 c6 538 1700 45 0.12 112 10svpd56m 1000 16 82 8.0 6.9 e7 670 2120 40 0.12 262 16svpd82m 1000 25 10 6.3 5.9 c6 474 1500 65 0.10 50 25svpd10m 1000 22 8.0 6.9 e7 580 1835 48 0.10 110 25svpd22m 1000 39 10.0 7.9 f8 664 2100 45 0.10 195 25svpd39m 500 47 8.0 11.9 e12 943 2980 30 0.12 235 25svpd47m 400 82 10.0 12.6 f12 1202 3800 28 0.12 410 25svpd82m 400 35 8.2 8.0 6.9 e7 400 1300 70 0.10 57 35SVPD8R2M 1000 18 10.0 7.9 f8 550 1800 60 0.10 126 35svpd18m 500 22 8.0 11.9 e12 700 2300 50 0.12 154 35svpd22m 400 47 10.0 12.6 f12 1150 3650 30 0.12 329 35svpd47m 400 ? 1 ripple current (100 khz/ +105 c < tx < 125 c), allowable ripple current (100 khz / tx < 105 c) ? 2 esr (100 khz to 300 khz/+20 c) ? 3 tan (120 hz/+20 c) ? 4 after 2 minutes please refer to each page in this catarog for ?reflow conditions? and ?taping specifications?. frequency 120 hz < f < 1 khz 1 khz < f < 10 khz 10 khz < f < 100 khz 100 khz < f < 500 khz coef? cient 0.05 0.3 0.7 1 size code c6 e7 f8 e12 f12 category temperature range ?55 c to +125 c rated voltage range 10 v.dc to 25 v.dc 16 v.dc to 35 v.dc 25 v.dc to 35 v.dc rated capacitance range 10 f to 56 f 8.2 f to 82 f 18 f to 39 f 22 f to 47 f 47 f to 82 f capacitance tolerance 20 % (120 hz / + 20 c) leakage current please see the attached characteristics list dissipation factor (tan ) please see the attached characteristics list endurance +125 c, 2000 h, rated voltage applied capacitance change within 20 % of the initial value tan < 200 % of the initial limit dc leakage current within the initial limit damp heat (steady state) +85 c, 85 % to 90 %, 1000 h, rated voltage applied capacitance change within 20 % of the initial value tan < 200 % of the initial limit dc leakage current within the initial limit (after voltage processing) speci cations marking dimensions (not to scale) frequency correction factor for ripple current ? externals of ? gure are the reference. characteristics list nov. 2015 01 downloaded from: http:///
if you want to use our products described in this onlin e catalog for applications requiring special qualities or reliability, or for applications where the failure or malfunction of the products may directly jeopardize human life or potentially caus e personal injury (e.g. aircraft and aerospace equipment, traffic and transportat ion equipment, combustion equipment, medical equipment, accident prevention, anti-crime eq uipment, and/or safety equipment), it is necessary to verify whether the specificatio ns of our products fit to such applications. please ensure that you will ask and check with our inquiry desk as to whether the specifications of our products fit to such applications use before you use our products. the quality and performance of our products as described in this online catalog only apply to our products when used in isolation. therefore, please en sure you evaluate and verify our products under the specific circumstances in which our pr oducts are assembled in your own products and in which our products will actually be used. if you use our products in equipment that requires a h igh degree of reliability, regardless of the application, it is recommended that you set up protectio n circuits and redundancy circuits in order to ensure safety of your equipment. the products and product specifications described in this online catalog are subject to change for improvement without prior notice. therefore, pleas e be sure to request and confirm the latest product specifications which explain the specifications of our products in detail, before you finalize the design of your applications, pu rchase, or use our products. the technical information in this online catalog provides example s of our products' typical operations and application circuits. we do not guarantee the non-infringement of third party's intellectual property rights and we do not grant any license, right, or interest in our intellectual property. if any of our products, product specifications and/or technical information in this online catalog is to be exported or provided to non-residents, the laws and regulations of the exporting country, especially with regard to security and ex port control, shall be observed. the switchover date for compliance with the rohs directive /reach regulations varies depending on the part number or series of our products. when you use the inventory of our products for which it is unc lear whether those products are compliant with the rohs directive/reach regulation, please se lect "sales inquiry" in the website inquiry form and contact us. we do not take any responsibility for the use of our products outside the scope of the specifications, descriptions, guidelines and precautions described in this online catalog. guidelines and precautions regarding the described in this online catalog. downloaded from: http:///
|
